The building, with a roof reaching down to the ground and resembling a triangular prism, invariably attracts attention with its shape, which is far from building standards. An A-shaped house is considered to be a variant of a country house, but more and more often full-fledged “hut” type residential buildings are appearing. Let's figure out what features, advantages and disadvantages a hut house has, what requirements apply to its construction.
Project designed for year-round living Source shopify.com
About the evolution of the prism house
Similar designs are known in different parts of the world. Simplified housing, consisting of one roof, has long been built in Polynesia, Japan, and China. Foreigners visiting Portugal could observe triangular thatched huts built by local fishermen.
For the first time, a professional view of the design appeared in the USA. In 1934, thanks to the architect R. Schindler, the first modern A-frame house was built; the role of walls was performed by a gable roof extending to the ground.
At first, the project did not attract much attention. But 20 years later, in the mid-50s, the original buildings became fashionable and were called A-frame houses. Their spread was facilitated by the post-war construction boom in the United States, when many families had the opportunity for regular country holidays.
A mini-house will fit into any natural landscape Source pinimg.com
Triangular buildings appeared in Canada and quickly spread throughout Europe. In the USSR they were called a hut house or a tent house; triangular buildings could be found in summer cottages. In the last 10-15 years, when environmental friendliness, closeness to nature and minimalism are among sustainable building trends, interest in a house without walls has been growing. Increasingly, projects are appearing not only for holiday houses, but also for full-fledged residential buildings.
Heating installation in a country house
Heating may not be needed for a summer cottage, which will only be visited in the summer months. During periods of cold weather, you can get by with an oil radiator or an air heater
If dacha owners plan to live or visit their dacha all year round, it is worth thinking about installing heating. You can buy a potbelly stove, of which there are a huge variety today, and install it in the center of the room. The stove can also be placed against the wall, however, do not forget about the lining made of refractory/clamotte bricks.
In any case, it is necessary to install the potbelly stove on a non-flammable and durable base. The place where the pipe passes through the ceiling is lined with protection consisting of stone wool. Such insulation will protect nearby surfaces from heating up to 1000⁰C, which is an excellent temperature reserve.
Design Features
Initially, a frame hut house became a lifesaver when it was necessary to quickly build housing with limited funds. It was built to be built from inexpensive materials, literally from improvised means. Budget options remain popular due to their simplicity, the possibility of experimentation and adaptability to environmental conditions.
The frame is the basis of the structure Source pinimg.com
At the same time, more and more luxury projects are appearing, which are chosen not because of the cheapness of materials, but because of the original design solution, the opportunity to live in a house that stands out from other buildings. All hut houses, regardless of size and price, demonstrate the following design features:
- They are framed in type and are assembled from a set of triangular frames.
- The main difference from standard frame projects is the absence of walls. In A-shaped houses, the design always includes roof slopes sloping down to the foundation (sometimes the slopes start from the base). In fact, in such a house the two main facades are always inclined.
- Occasionally there are combined projects in which a low box is arranged.
- Despite the fact that the triangular shape limits architectural possibilities, the buildings are quite diverse. They include balconies and verandas; projects with a glass facade (second light) and with extensions are common.
A-project on a slope with a high terrace Source wp.com
- For construction, any suitable lumber is used: dry boards, timber, as well as wooden slabs and lining.
- In small projects, the chimney of a stove or fireplace is placed outside the walls. The forced decision can hardly be called rational, since the heat is used to heat the street, but externally it adds individuality to the building.
- A relaxation area must be created in the house: a balcony or a high terrace in front of the entrance (and sometimes both).
- Unusual, attic-like rooms are comfortable and promote a break from the usual surroundings.
- The layout of the A-frame is quite varied. Already in a hut house in the form of a 6 by 9 project, there will be enough space for a small family to relax. A-project 8x10 is quite suitable for year-round living.
Here they reduced the size of the second floor in order to preserve the volume in the living room Source yuimetalpatlu.pw
Triangle roof
The foundation stood for almost a month, which, in general, is not bad, and then in a couple of weeks the house was put under a roof.
Our love is a roof. At the stage when we thought that the house would fall apart due to the poor quality work of the builders, we looked at the roof and were happy: it was incredibly beautiful and did not look heavy.
I already wrote that we love the color blue, and I really wanted to go blue with the roofing too. But this is somehow difficult, and at some stage I almost agreed to a green beaver tail, but the internal marketer ordered me to look for it as cheaply as possible.
The builders' estimate included shingles at $5.65 per square and carpet at a dollar per square. It’s still a mystery to me what kind of carpet this is, but that’s a thing of the past. Red. Brown. Bolotnaya. These three words sounded like a sentence, I kicked as hard as I could.
At some point we saw the “Glacier” collection from TechnoNIKOL, and my heart melted. But I decided that $8 was too expensive. So I sat down and made a list of companies that had such tiles, and I got a table of 27 contractors. Those that do not deliver were excluded. Then she began sending estimates to all companies, bringing down the price. This is a marketing technique: if you need something cheaper, just say that someone is giving a lower price. This time I threw out the estimates: the roofers didn’t take my word for it.
Drum roll: I have Glacier tiles for $6 square!
From the jambs:
— the holes for the gas pipe were not made in advance.
— we made a hole for ventilation in advance, but mastic flowed from there, now it looks like my tears over a perfect construction site.
Advantages and disadvantages
Like any architectural project, a hut house has positive and negative qualities. The following features are considered advantages:
- Small budget. You save money on the two most expensive parts of construction: the foundation and walls. The structure does not require a massive, material-intensive foundation, and there are no walls as a class. You get rid of the purchase of materials, which are indispensable in standard construction.
- Saving construction time. Due to the absence of walls, the design of a modular house is greatly simplified, which facilitates construction and reduces its time.
- A simple construction algorithm. No need to look for qualified specialists; The wooden frame is easy to assemble and sheath on your own.
- Reliability. The design is highly resistant to wind and snow loads.
- Benefit for small summer cottages. The triangular shape does not cast as much shadow as a standard building, which is beneficial for growing plants.
- Harmonious proportions. The hut house easily fits into any environment and becomes a decoration of the site.
Construction process, frame assembly Source proderevo.net
The shape of the house imposes restrictions on functionality, which should not be discounted. For example, the main problem of a hut house project of 6 by 6 m is the small usable area for a given building area (when compared with a wall structure). This gives rise to the following inconveniences:
- It is quite difficult to design a comfortable interior space, especially if the house is intended for recreation and has a small area. Size and shape greatly limits the size and number of rooms.
- The height of the house is difficult to use rationally; for example, the attic turns out to be inconvenient: narrow and high.
- If a second floor is planned, its area will be much smaller than that of the first. Difficulties will arise with the design of the staircase, because it needs to be made as compact as possible and at the same time convenient.
- A large hut house will need dormer windows in the roof, and they are more expensive than ordinary windows in the walls.
- It is very difficult to place standard furniture - you cannot move it against the wall, there will be few places for organizing storage.
Project of a small house with a terrace Source pinimg.com
See also: Catalog of companies that specialize in designing country houses
Flooring roofing material
Slate sheets can be used as roofing material. Its installation begins with the installation of the sheathing. For this purpose, beams with a medium cross-section are used, which are attached to the rafters. These elements are installed in increments of 0.5 m. The beams extend beyond the frames at the edges by 50 cm.
Roofing material should be spread over the sheathing, laid and secured with nails. In this case, rubber gaskets are used. Slate is fragile and can be damaged during installation. Work is carried out from the bottom up. The sheets will overlap each other, preventing moisture from getting under the roof. The horse needs protection. To do this, you can use a strip of roofing material that is pre-bent.
Design nuances: what you need to pay attention to
In Russian conditions, prism buildings are often a dacha option; a hut house as a project for the main place of residence is a rare phenomenon. But no matter what size the housing is planned, there are a number of nuances in its construction. The following features will need to be taken into account:
- Roof rafters will most likely have a non-standard, elongated size. They will have to be ordered separately, and custom manufacturing is more expensive than purchasing standard construction mats, especially since you cannot skimp on the quality of wood.
- The roof slopes, which act as walls, do not have high thermal protection. To maintain a comfortable microclimate in the house during the cold season, you cannot do without additional insulation using high-quality materials.
- The roof is high and steep, so the work associated with it (laying roofing material, insulation) becomes more complex and dangerous.
- To save usable space, the stove (fireplace) chimney will have to be moved outside the house. The heat from the pipe will not warm the premises in winter.
An original solution for summer holidays Source pinimg.com
- Some details both decorate and add value to A-frame homes; in projects with panoramic glazing, energy-efficient double-glazed windows are used. They are located at the end of the house and, if they occupy a large area, they cost a pretty penny, since they are made to order.
- Sloping interior walls force us to look for non-standard approaches to creating an interior. Most likely, some of the furniture will have to be made to order.
- A nuance that few people think about: excessive audibility in the bathroom.
- The roof has a large surface area, so it will get quite hot in the summer. If you do not plan to build a hut under a spreading oak tree, you will have to take care of the air conditioning system.
A hut house measuring 6x6 m is suitable for permanent residence, but it is designed for one or two residents. If there are more than two people in the house, then without a high-quality ventilation system it will quickly become stuffy, and comfort can only be restored with the help of ventilation. The problem arises not only in the summer, and this moment needs to be carefully considered.
Even under the canopy of trees one cannot do without ventilation Source blogspot.com
Construction stages
Laying the foundation
For this design, you can choose one of three types:
- tape;
- pile;
- pile-tape.
Preference depending on the type of soil and area of construction.
Walling
The main feature of the triangular-shaped structure is the presence of only two walls: the front and the back (rear). Therefore, for the construction of the walls of a country house, it is better to give preference to wood or wood products (glued laminated timber, chipboard, fiberboard).
Although you can also find options for construction from brick or gas blocks.
Window placement
Where would you prefer to live: in a private house or apartment? Definitely an apartment! Comfort, coziness and warmth, surrounded by people and infrastructure 31 (4.22%) Only a private house! There is silence, peace, a lot of space and few people around! 339 (46.19%) Why choose just one? There is an apartment in the city, and a private house outside the city. 342 (46.59%) I am a free Citizen of Planet Earth! I don't need a man-made cell! 22 (3%) Back
Windows in the house are the main source of lighting
Therefore, it is very important to choose the right location from accommodation. Most often they are located on the front wall of the house.
Although you can consider their presence on the roof
In this case, special attention should be paid to the reliable structure of the frame. It must be as strong as possible to withstand the pressure of the roof, and at the same time light so as not to create pressure on the base
Frame formation
The frame of the hut-shaped structure consists of two isosceles triangles connected to each other. Depending on the roof material, the structure can be made of either wood or metal.
Roof selection
As mentioned above, in order to create less pressure on the base of the house for the roof, it is better to choose lighter materials.
You can opt for metal tiles, ondulin or metal profiles. Although the choice depends entirely on personal preference and budget. The main thing is to take care of high-quality heat and sound insulation.
Suitable for thermal insulation:
- expanded clay;
- glass wool;
- Styrofoam.
If only the roof is insulated, then the material is laid inside the building. But you can also think about a system for insulating the walls of the building. Then it is advisable to place the insulation outside, hiding it under the sheathing.
Sheathing options
For the exterior cladding of a house, siding or metal profiles are most often chosen. They are durable, frost and moisture resistant, resistant to fading and sudden temperature changes. For interior decoration, aesthetic and fungus-resistant materials are most often used: lining, plasterboard, ceramic tiles.
Various types of plaster will look impressive for both external and internal decoration.
Pay attention to heating
Stove heating is being replaced by new modern types:
- gas;
- electrical;
- steam.
By choosing this option, you can be guaranteed to heat all rooms, including the attic or attic area.
As you can see, a triangular-shaped house is a creative and inexpensive solution. The main thing is to choose a suitable project in advance and think through all stages of construction in detail.
Layout
In most cases, an area of 6x6 m is chosen for a country house. Housing of this size was built in the USSR until the 80s of the last century, as evidenced by reference books on the design and construction of houses of that time (scans of some publications are posted online). Due to the small usable space of the hut house, special attention must be paid to the layout. When designing, the following points are taken into account:
- The layout of the first floor must include a vestibule or a small hallway. The airlock will help protect your home from cold air.
- On the ground floor there is a living room, kitchen and bathroom (due to lack of space it often has to be separated). A popular studio option is when the kitchen and living room make up one space, and also serve as a dining room.
Ground floor studio space Source pinimg.com
- It is extremely important to choose the shape of the staircase correctly and position it with minimal loss of space.
- The second floor is designed for one or two bedrooms. Since sloped walls reduce usable space, it is important to make the most of it. The easiest way to do this is by placing built-in storage areas (cabinets, shelves, closets) along the roof slopes.
- Since the project is being created for a summer cottage, it is complemented by a terrace or porch, spacious and comfortable enough to provide enough space for evening tea parties.
Second floor design Source wowowhome.com
Design and finishing variations
The simplified design does not provide for variety in the design of the hut house; projects with dimensions designed for small areas demonstrate a limited range of design techniques. In Russia, A-shaped houses are characterized by the following features:
- The installation of roof windows is rarely resorted to, as they reduce thermal insulation and increase the construction budget. More often, panoramic windows are installed on the front and rear facades; this visually expands the rooms and makes them brighter.
- For interior decoration, materials made mainly from natural wood (or its high-quality imitation) are chosen.
Mini-project exclusively for country holidays Source pinimg.com
- Metal tiles, corrugated sheets, chrysotile cement slate, and soft tiles are chosen as the finishing material for the roof.
- There are projects of frame A-shaped houses with a side extension for a bathhouse or sauna. A convenient detail: a covered terrace is built between the two buildings.
A-housing is popular in the north of continental Europe and in the countries of the Scandinavian Peninsula, where the option with a porch raised above the ground is common. There are also more exotic options, for example, a project with an additional entrance through a second-floor balcony (a popular option in mountainous areas with heavy snowfalls).
As a result of experiments by Swedish and Finnish architects, modified versions of the A-frame have emerged in recent decades. Thanks to different roof angles, such projects include one wall and more living space.
Modification of the usual form in a modern style Source pinimg.com
Standard solutions have become more diverse and are implemented in different design solutions. The Scandinavian style is popular, as well as the style of a chalet, hunting lodge, and minimalism. You can use this experience in developing your own design project.
Conceptual solution with an original roof Source mymodernmet.com
The procedure for constructing the frame
At the first stage, it will be necessary to install the outer rafters, which will act as part of the pediment of the facades. Use a plumb line to check verticality. The rafters are secured using supports. The lower corners are fixed with metal plates and bolts. Now you can start marking the frame fixation area and installing the frame using nails.
At the final stage, the rafters are installed under the ridge. Once the above work is completed, the wind ties will need to be strengthened at the top of the frame. They are attached to the rafter legs. Temporary supports are examined to be removed. All three frames of each edge are connected using the same technology.
Briefly about the main thing
An A-shaped house is an unusual way to improve a summer cottage. In addition to its impressive appearance, it has many other advantages, but when deciding to build, one must also remember the disadvantages of such housing. The triangular-shaped project has many features, and if you take them into account, you can live in the house all year round.
Since the usable area of a standard 6x6 country house is very limited, proper planning is important. Refusal of classical zoning allows you to make the most profitable use of space. Thanks to the large glass area, the housing will not look cramped, and different design methods will give the project individuality.
