Pipe box in the bathroom: choice of design and material, step-by-step instructions

Constructing a pipe box in the bathroom is the best way to disguise plumbing and sewerage systems. This design does not require the transfer of communications. During its production, a minimal amount of construction waste remains. If you have the appropriate skills, you can do all the work yourself.

It is very convenient to install a pipe box in the bathroom.

Advantages of hiding communications under a box

When decorating bathrooms, boxes are now often used to hide several or all pipes. Such elements not only allow you to create a beautiful design, but also have a number of advantages.

These include:

Attractive appearance. When made from high-quality materials, a cabinet for masking pipes will not stand out against the general background or spoil the interior.
Easy to assemble. The structure can be assembled not only at the rough finishing stage. Often pipes are sewn up during a bathroom refurbishment. Frame and sheathing elements can be installed on top of the cladding.
Possibility of pipeline maintenance or repair. If the box is equipped with a hatch, you can find out the readings of metering devices and monitor the condition of the pipes. If necessary, water supply or sewerage elements are replaced.
Possibility of combination with shelves, installations and other interior details. This allows you to effectively use the space of a small bathroom.

Hatches

No less important components than the boxes themselves are the hatches that are placed in the fences for access to pipelines, fittings and metering devices.

During installation, the following types of hatches are most often used:

Factory made for tiles. They are sold in standard sizes with an opening system and a lid, the surface of which is designed for gluing and holding ceramic tiles. Typically, such hatches have a rigid hinge system that allows them to hold a high weight of ceramics and cover large areas; almost all designs are designed to be torn off by pressure.

Factory made from PVC. These are lightweight hatches, usually white with a frame and doors, great for plastic panels; they are often installed in plasterboard lined with tiles. They are usually opened by turning the doors while pressing from the side.

Rice. 10 PVC and painted steel hatches

Factory made from steel. In everyday life, hatches made of painted steel are not used very often due to their low decorative value and heavy weight (not suitable for installation in a PVC panel); they are opened through recesses in the doors.

Homemade for drywall. The most popular option for installing hatches is to make them yourself from a profile frame and a piece of drywall, onto which tiles are then glued. The tile maker can make a handle in the hatch by drilling a through hole in the tile, or they can purchase a special vacuum suction cup to open it.

From tiles. In a tiled plasterboard covering, openings can be covered directly with tiles by gluing them onto a sheet of dense material (plywood, chipboard, gypsum fiberboard) along with magnets. When installed in a profile niche, the magnets will stick to the metal frame.

You can do the opposite - if the frame is made of wooden beams, steel plates are glued to the tiles, and magnets are screwed to the sheathing. You will have to use suction cups to open tile hatches with magnetic fasteners.

Rice. 11 Homemade hatches

Options for materials for manufacturing the structure

When making a box in the bathroom, first install the frame. It is sheathed and then veneered. Galvanized profiles are used to construct the base.

Materials with the following properties are selected as coatings:

Resistant to moisture. The structure is installed in a room with high humidity, so the material should not be destroyed when condensation forms.
Small thickness, lightness. The ease of installation and the size of the finished box depend on these parameters. Walls that are too thick take up useful space.
Environmental Safety. The material should not emit toxic or allergenic substances.
Attractive appearance. The walls should be in harmony with the interior or allow for cladding with any materials.

Moisture-resistant drywall

Moisture-resistant drywall.

Standard gypsum boards are not suitable for decorating the interior of a bathroom or toilet. The moisture-resistant type of material is resistant to water. This type of drywall is distinguished by the green color of the sheets. It is suitable for creating rectangular, semicircular or polyhedral designs. The sheet is impregnated with an antifungal compound that protects against mold.

When choosing a material, you need to take into account its features, which include the following points:

Installing sheets requires more steps than installing plastic or MDF panels.
It is impossible to build a collapsible box from drywall. During manufacture, a hatch is provided that provides access to communication systems.
GCRs are not considered a finishing material. After assembling the structure, cladding is required. Bathrooms are often tiled, but other finishing methods can be used: plastering, gluing waterproof wallpaper, painting.

Waterproof plywood

Waterproof plywood differs from simple plywood by its special impregnation . The sheet has a thickness of 6-40 mm. The material has good performance qualities. Despite the moisture resistance of plywood, it must be treated with hydrophobic compounds. The main disadvantage of the material is its high price, due to which it is rarely used.

PVC plastic panels

A box made of plastic panels does not require additional finishing. The large number of colors offered allows you to choose products that are in harmony with the color scheme of the room.

In addition to good aesthetic qualities, the material has the following advantages:

Resistant to moisture. The material does not deform when water drops enter or condensation settles.
Long service life. Durable plastic does not lose its qualities for 5-7 years.
Easy to care for. Remove dirt with a damp cloth or soap solution.
Easy to install. A person who does not have construction skills and special equipment can work with the material.
Acceptable price. PVC panels are a budget cladding product that helps reduce finishing costs.
Possibility of repair. Damaged parts can be removed without destroying the entire structure.
Compact sizes. Due to the small thickness of the panels, the box does not take up useful space in the bathroom.

OSB boards

Oriented strand boards help quickly disguise the pipeline. They are multilayer sheets impregnated with resins, artificial wax and other substances.

There are several types of such material. To repair rooms with high humidity, sheets with additional impregnation are used. For a box made of OSB boards, a wooden frame is more suitable.

OSB boards.

MDF and HDF boards

Assembling a cabinet to mask pipes from MDF panels is not the most suitable option for a bathroom. The material quickly absorbs moisture, collapsing under its influence. HDF sheets have a higher density. They are resistant to moisture. Structures assembled from HDF panels last more than 10 years.

Recommendations

Installing a box in a bathroom requires caution and compliance with the following recommendations:

Before installing the box, they check not only the tightness of the joints and the stability of the valves and meters, but also the correct functioning of communications, for example, a sufficient slope of the pipes.
If the frame of the box is made of wooden beams, it is worth additionally impregnating it with a protective composition. The same procedure will be useful for wood boards.
At the measurement stage, it is useful to take into account the location of household appliances in order to avoid unnecessary problems in the future.

Toilet with a box system Source mykaleidoscope.ru

Design selection

You can sew up pipes in the bathroom in different ways.

The most commonly used types of structures are:

Cabinets. This option is suitable for hiding sewer risers or other vertical pipelines. The design provides full access to engineering systems. It can be equipped with shelves and other elements that allow you to make good use of the space.
Partitions. They have the width and height of the room. Despite the fact that the area of the room is reduced, the bathroom looks neat. All engineering systems are hidden. This option is suitable for spacious combined bathrooms. The partition is installed when there is a wall-hung toilet; it hides not only the pipes, but also the installation. Behind the partition there are shelves for storing household chemicals.
Horizontal. Used to hide water supply or sewer lines laid close to the floor.
Compact. Small structures are used exclusively to camouflage pipes. They do not take up useful space, giving the room a neat look. Compact boxes can be horizontal or vertical.

Why don't builders hide pipes?

The bathroom is rich in all kinds of communications. Sewage pipes, hot and cold water supply, as well as additions in the form of a heated towel rail or heating system are on public display here.

This “openness” is not accidental. Even if the room is spacious enough and the layout allows, builders leave most of the pipes in sight. The reason lies in building codes that directly prohibit the hidden installation of pipes connected by certain types of fittings. For such devices, easy access in case of problems occurs.

Another reason for open installation is the formation of condensation on metal pipes with cold water. Only air constantly circulating around the pipe can effectively remove condensate.

That is why in the bathroom you can see pipes anywhere on the wall, in a corner or in a niche. They can be vertical or horizontal, running under the ceiling or near the floor. A separate class of pipes that need to be hidden are products of different diameters coming from plumbing equipment, as well as toilets with installation.

Not every pipe needs to be hidden Source izhevsk.ru

Preparing to install a masking box

At the preparatory stage the following actions are performed:

Assess the condition of pipes, fittings, metering devices, and other communication elements. When laying a new pipeline, make as few connections as possible. All joints must be treated with sealant.
Drawing up a diagram. You need to choose the option that is most suitable for the bathroom. They take the necessary measurements and make a drawing. At the same time, they provide for the presence of a hatch in the places where plumbing fixtures are installed - meters, valves.
Calculation of the quantity of materials. Determine the dimensions of the future structure by counting the number of frame elements, sheathing and cladding.

Peculiarities

After the bathtub is installed and all installation work is completed, you need to take care of the aesthetic side of the process. This includes hiding the water supply and sewerage system from human eyes, which, in essence, will spoil the entire appearance of the bathroom. The presence of a screen easily solves this problem and is the final step towards creating a cozy bathroom.

The interesting thing is that when you enter the bathroom, it is the screen that initially catches your eye. Lined with tiles, it is the central point of the room. With the correct and interesting selection of color and texture, the screen evokes admiration, creates an atmosphere of comfort, and emphasizes individuality.

The tile does not absorb water and is easy to clean.

Required materials and tools

Construction knife.
After drawing up the project, they proceed to the purchase of the following materials and devices:

construction knife with spare blades;
roulette;
building level;
screwdriver with different attachments;
scissors for cutting metal;
fasteners (dowels, screws, self-tapping screws);
drill;
profiles made of stainless metal;
sealing compound;
sheathing sheets (plasterboard, chipboard or plastic panels);
plastic skirting boards;
tiles or other facing material.

Frame construction

The frame is built like this:

Install the guide, attaching it with dowels. The distance between fasteners is 0.2-0.3 m.
Mount the guides on the floor and ceiling. This allows you to make the angle of the frame required for installing the rack. To ensure that the sharp parts of the structure lie in the same plane, the profile is attached to the ceiling at an angle of 90°. A plumb line is lowered from it and the location of the underside of the stand is marked. The latter is screwed to the horizontal guides with self-tapping screws.
Install reinforcing elements. In this case, the location of future inspection holes or doors is taken into account.
A profile is attached to the wall and floor, which determines the dimensions of the structure. Using jumpers, the front frame parts are installed. At the same time, the location of plumbing fixtures, sewer outlets, and meters is also taken into account.

Creating a door in the toilet behind the toilet: simple and useful

The construction of a cabinet behind the toilet is considered a multifunctional solution to the problem. Communications are securely hidden, while access to them is open, and household supplies can be stored in the locker. First you need to make a frame out of wood.

Hinges should be installed on the frame itself, on which the door will be hung. To protect against moisture, the wood is coated with varnish and paint. And the appearance of such a device is quite nice. You can make a screen for pipes under the cabinet.

Screen hardware features:

The screen should fit snugly against the walls;
Openings are provided for water supply;
The screen should be easy to remove and put back in.

The material for the cabinet can be chipboard, plywood, or plasterboard. To build the doors, you need to take the necessary measurements. Then a blank is cut out from the required material and inserted into a niche. Then they cut out the screen.

Finishing

It is necessary to properly prepare the box for lining.

They do it like this:

Use a knife to stitch the joints between the sheets of drywall. The resulting gaps and corners are cleaned with abrasive paper.
The cracks are filled with putty and glued with reinforcing tape. All corners of the box must be processed.
After the solution has dried, the surfaces are primed, applying the composition in 2 layers.

The plasterboard box is decorated with tiles. The wrong side of the material is treated with glue, which is smoothed with a wavy spatula. The facing is applied to the surface and pressed. The remaining elements are installed in the same way. The seams of the tiled product are treated with grout. The corners are covered with additional elements of a suitable color.

How to make a plastic box with your own hands

A structure made of PVC panels is assembled if the room is sheathed with plastic. It does not require finishing.

Frame assembly

The base is assembled in the same way as when constructing a plasterboard box.

Plastic box for pipes.

To do this, perform the following actions:

Fix the guides to the wall using dowels.
An outer corner is formed, securing the profile with jumpers. All frame parts are fixed using metal screws.

If there is a large distance between the pipe and the wall, install a wooden shelf. The design includes an additional hatch. This allows you to use free space for storing household chemicals and equipment.

Frame covering

The frame is covered with simple PVC panels. The width of the strip is selected in accordance with the size of the structure.

Sewing is done like this:

An initial profile is installed near the wall, and the edge of the lamella is inserted into it. The second edge of the product is attached to the jumpers with self-tapping screws.
The next panel is joined to the previous one. The free edge is cut along the frame post. It is also secured with self-tapping screws.

.If some of the pipes cannot be masked, they are bypassed in this way:

install a starting profile near the wall;
holes are formed in the panel with a size equal to half the cross-section of the pipe;
the panel is cut to width and inserted into the space behind the pipeline;
in the next lamella the same cutout is made, the sheathing elements are connected to each other;
the remaining gaps are filled with sealant.

The locations of the hatches are marked on the surfaces of the plastic panels.

Final stage

The assembly process ends with the installation of the hatch, which is carried out as follows:

Use a jigsaw to cut holes. Install a tilting or rotating hatch of the appropriate size. The plastic product is fixed using sealant.
Press the hatch to the surface and remove excess sealant. If the hatch does not have a handle, the fittings must be purchased separately.
The outer corner is covered with a polymer plinth, which is secured with sealant. While the composition dries, the part is secured with masking tape.

What are they?

Modern manufacturers offer a wide range of products to suit every taste.

There are different types of protective panels:

deaf;
with sliding doors;
with accordion doors;
with hinged doors;
with shelves.
with fabric curtain.

Which option to choose is up to each person to decide for himself. If you want to save free space, you should choose the option with accordion doors, which fit best into small spaces. For a comfortable location of household chemicals under the bathtub, it is better to choose a product with shelves. But blank panels are distinguished by their aesthetics. They are very simply attached to the frame, but their installation limits access to plumbing connections, since not all models can be easily and quickly removed.

Find a full overview of all screens in our special article.

The most popular options among users of acrylic bathtubs are:

front panel.
continuous screen made of ceramic tiles;
sliding

In our article we will take a closer look at installing an acrylic panel, because consumers most often prefer this method of decorating the space under the bathroom.

For detailed information about installing a screen made of tiles and sliding panels, see the relevant articles

Installation of an invisible hatch

This hatch opens by pressing the middle part. The magnetic lock slides, releasing the door from the frame.

The hatch is constructed as follows:

At the preparatory stage, the location of the part is marked. Most often, the hatch is installed in the middle part of the front wall of the box. This allows you to preserve the tile pattern.
When installing the frame, a niche is formed, the parameters of which coincide with the dimensions of the hatch. The frame is secured with long self-tapping screws. This part is supplied with a door and fittings.
The frame is sheathed with sheets of plasterboard, laid overlapping. The frame is also covered.
Drywall is treated with a primer. After the composition has dried, the tiles are laid. The seams are covered with sealant and the structure is allowed to dry.
Use a construction knife to cut through the hatch, holding the tool at an angle.

Kinds

Dull screen. It does not provide the opportunity to look under the bathtub. This is a capital, one-piece structure that does not have a door. Visually, such a screen is good, but in terms of functionality it has one big caveat: the impossibility of repairing the sewer system. Indeed, in the event of a leak or any other breakdown, it is impossible to get to the place where it occurred. You have to destroy the screen to get inside. And the most unpleasant thing is that the breakdown cannot be seen immediately. A water leak can ruin the interior of your bathroom and more. The ceiling of the neighbors living below will also be damaged. You will have to fork out not only for repairs in your own apartment, but also to compensate for the damage to your neighbors.
Partially open. This type of screen is quite functional and safe. Shelves and niches where you can place detergents or anything else will be a rational solution for a small bathroom. The presence of a door provides unobstructed access to the water supply and drainage system.
Sliding. You can create such a screen, but the process will be very complicated. Moreover, tile is not a very suitable material for it.
Screen with a slope. A slight tilt creates a niche in the screen where you can place detergents. This type of screen is ideal for families with small children. It will be very convenient to bathe your baby.

Advice from professionals

Plumbers and builders give the following recommendations for masking pipes:

When hiding the risers, markings begin from the floor.
Installing a door or forming an inspection hole is mandatory.
Any material used for cladding is impregnated with an antifungal solution. This will prevent mold from forming.
Wooden structures are not recommended for installation in the bathroom. This frame is suitable for a toilet.
The cabinet for pipes cannot be assembled from chipboard, which absorbs moisture. The material swells and begins to crumble.
Vertical parts are installed at a distance of no more than 30 cm. This gives the structure rigidity.
Closely located pipes are not sutured separately. It is recommended to build a single structure.

The walls should not come into contact with communications. The minimum distance is 3 cm.

The simplest way is decor

When the budget does not include repair costs, and the pipes in the toilet are quite annoying, you can get by with minimal expenses. We are talking about decorating visible parts of the pipeline.

This method can be a real salvation when the head of the family, instead of repairing, chooses other ways to spend his leisure time - for example, fishing or basketball with friends. Moreover, both women and men can handle decoration. The main thing is to have inspiration.

Remarkable imagination and free time on a day off will help turn your thoughtful office into a realistic jungle

Depending on preferences and mood, the pipeline can be disguised as anything - turned into a tree, into an animal, or decorated with beautiful decorative elements.

Main types of decoration:

stick a film with a suitable pattern over the pipes;
paint with waterproof paint to match the color of the walls in the toilet room;
depict a unique pattern or reproduce a birch trunk, oak bark or other material using paints;
use decorative stones, beads, chains, twine and other elements used for needlework.

The simplest and most convenient option is to paint the pipes with paint that harmoniously matches the color of the walls. Or stick a film with a pattern.

Image gallery

Photo from

Decorative paint, shells, beads

The pipe can be turned into a giraffe

Make a birch tree from a pipe in the toilet

Unique pattern on pipes

It is important here that the material can withstand a humid environment and high temperature if hot water enters the apartment through one of the pipes.

For the toilet room it is better to use water-based paint, choosing the most favorable shade that can harmoniously fit into the overall style of the room

The decorating method is also great for hiding pipes in the kitchen or bathroom. In addition to decorating pipes in these rooms, you can use other methods of covering communications.

We also recommend that you familiarize yourself with the best options for masking gas pipes, used by resourceful owners.