White interior doors in the interior of an apartment and house: photos of panels with and without glass, glossy and matte, combination with modern style and classics

When choosing doors, most people give preference to practical panels, but at the same time not forgetting about aesthetic qualities. White color is one of the most popular shades, which is suitable for both classic and modern interiors. A variety of finishes and materials allow you to solve any design ideas. But how to choose exactly the model that will organically fit into the interior of your room, read on.

Should I install white interior doors?

When renovating an apartment, many people wonder what color to install interior doors. In our country, 25% prefer white, considering it neutral and most suitable for any interior. But there are those who are against this color scheme.

The color white gives rise to many myths and misconceptions:

The white doors resemble a hospital . In fact, doors used to be associated with a hospital or other medical facility, but this statement has long since become inappropriate. Finding such a “hospital” door is almost impossible.
Dirt is clearly visible on white . In fact, dirt is visible on any color if you do not keep the products clean.
The color of the door must match the floor or furniture . This is a misconception that gives rise to boring color schemes during renovations.
White interior doors are unstylish and look simple . There are quite a large number of white doors on the market, designed according to the latest trends, and well-chosen fittings can give the door a stylish look.
The paint is peeling off the white door . This misconception dates back to the times when door panels were covered with several layers of white paint, which later began to peel off. Now the materials and technologies are completely different - they completely eliminate paint peeling.

A bathroom door with a matte narrow strip of glass - what's the point?

It is clear that there is light in the bathroom, but the body is not visible, only a limp silhouette. It is impossible to determine whether it is a man or a woman. The door is not opposite the toilet, but opposite the bathroom. In principle, there might also be a curtain next to the bathtub. The width of the glass is 20 cm. Question: would you be embarrassed to take a bath in front of such a door?

I have one, the most interesting thing begins when the glass becomes covered with condensation during the shower . From the water, the frosted glass becomes almost transparent. that's the highlight

Already discussed, the matte side should be out

this glass was placed incorrectly with the frosted side, it should be in the corridor, and not in the bathroom/toilet, the installers clearly demonstrated this to me using a spray bottle

And so?

I would run to the neighbors. =))

)) still without glass?

yeah, until we figured out what kind of glass to insert.

I have these in both my bathroom and toilet

These are good to press your buttocks against

Yeah, we’re snuggling, in fact, practice has shown that even if you carefully peer inside from the outside, pressing your face to the glass :), you can’t see anything

Okay, you can see the face pressed from the outside))

From the inside, you can’t see your face at all , you can see the silhouette of your wife/girlfriend and her body parts pressed against the glass. protruding but nothing is visible from the outside

In one of my bathrooms, in the toilet and in the shower in the sauna, there are doors with frosted glass inserts. Nothing is visible, no one is bothered. At the same time, there is an additional signaling function that the establishment is busy, the lights are on ;)))

fig male silhouette) ik )

Yes. My sister has one like this, it’s terribly annoying when you have to spend the night with her.

Why is something terrible happening in the bathroom? It's not like a toilet.

tell you everything, and then show you everything. =)

Is there no curtain for the bathtub?

Some things are not done out of the blue. =))

I don't understand. Is the toilet opposite the door? This is a joint

Toilet in a separate room. How do you enter the bathroom right behind the curtain? and then go straight out? Well, you have a rich imagination. =)) In general, I like it, so why ask about shyness?

Ahhh! Got it, sorry. Well, I'm planning a big bathroom.

Just out of curiosity. But why do doors in such offices need such an insert? If you can’t see it, then it makes sense, and if you can see it, it’s also not ice. Regarding beauty, the same is doubtful IMHO, in my opinion you can even choose a deaf beautiful one.

+1 about the signal function. Or you need to embed a glass block into the wall.

in rooms it is quite normal and acceptable, but in bathrooms, which are usually located so that when the lights go out, these slots will not help. I don’t argue with my friend, even the matte walls don’t soar. =)))

I didn’t really understand about the walls, but about the doors. . Personally, I have both the toilet and the bathroom located in such a way that the light enters them perfectly through these “slits”, as you put it by the way , there is one more point, if suddenly (well, you never know) the lock jams, then you can “exit” through the glass

The correct locks must be installed in such a case. =)

nothing lasts forever

I'll finish it :)) I'm sorry, I can't turn it over :((

=) there are no blinds here, I’ll hide behind them, I’ll fit in =)))

Yes, without blinds it was inconvenient; the lowest point of the window is +2 meters from the ground - you can clearly see the neighboring areas :)

I have these and in the bathroom opposite the toilet too. You can’t see a damn thing there and no one has been embarrassed for a long time, although there were doubts when purchasing.

+1 completely matte door opposite the glasses) the poor sound insulation will burn))))

Pros and cons in the interior

Like any interior color, white interior doors have their pros and cons.
Pros:

Versatility. White color fits perfectly into any interior and style, regardless of the color of the flooring or furniture in the room.
Color visually expands the space. The light shade of the doors is ideal for small rooms.
Large selection of canvases from economy class to luxury.
The color has a large number of shades.
Installing white doors is the ideal solution for rooms that are too dark.
White color does not weigh down the space.

Minuses:

White color is quite easily soiled and gets dirty quickly. Door handles get dirty most quickly on light-colored canvases.
If you don't plan the design of the room correctly, a white door can look simple.

Glass processing methods

Glass for interior doors is frosted in different ways. Today, the most commonly used are the following:

sandblasting;
firing or applying special varnishes or paints;
spraying;
chemical treatment;
creating a coating from an opaque film (or Oracal).

The aesthetics and price of glass and, accordingly, the entire door structure depend on the method of surface treatment. Opening doors can be completely frosted or have transparent areas, and the treated surfaces are not always left white - they are often painted in pastel colors.

Aluminum doors with glass for bathroom and toilet

After frosting, the glass remains durable, so there is no need to be afraid of its destruction. Safety tempered glass does not lose its properties and is very difficult to break. If destruction occurs, the glass fragments after tempering have a rounded shape without sharp, wounding edges.

During production, layers of laminated glass of the triplex type are glued together with a special film. When broken, the film keeps pieces of glass glued, preventing them from flying apart.

Frosting glass with sandblasting

To give the glass surface a matte effect, various methods are used: engraving, grinding and sandblasting. The latter method is used most often, since it allows you to quickly and cost-effectively impart the desired properties to large-sized glass.

The purpose of sandblasting is to destroy the integrity of the glass surface with a jet of sand applied to it under pressure. Sand treatment is carried out with special devices - sandblasting guns.

Depending on the result obtained, the process has several varieties:

Deep processing - by adjusting the level of pressure and time of contact with sand, you can create relief patterns on glass.
Printing processing - the surface acquires a uniform velvety texture.
Processing with the addition of color - frosted glass is given the desired shade entirely, or a specific pattern is created that glows in the dark.
Carved processing - patterns or designs are engraved on a matte surface.

Sand matting allows you to process glass evenly or create specific images on it. When creating a relief pattern, the elements with the greatest recess are made first, and then the remaining surface is decorated.

They started frosting glass with sand a very long time ago. The first craftsmen placed sand on glass surfaces and ground it into massive slabs laid on top. Today, the process is carried out using devices that allow you to regulate the size of the area being processed and the force of sand supply. Thanks to such capabilities, modern frosted glass delights customers with beautiful patterns and designs.

Selecting a shade

White interior doors look stylish and advantageous. Moreover, white has many shades, among which every buyer will be able to find a suitable option:

milky - such doors are in harmony with dark and contrasting materials;
the color of baked milk - goes well with pure white;
ivory color - used in classical and antique styles;
vanilla shade - suitable for those cases when you want to make an accent between white walls and light canvas;
snow-white is a universal shade;
creamy shade - can bring coziness and comfort to the interior.

The most common door shades include white oak, ash and light shimo. They are preferred due to their practicality and ease of combination with the interior.

Material selection

According to the manufacturing method, door leaves are mainly divided into panel doors, when the door leaf is made from solid material, and paneled, that is, prefabricated.
The best quality door is a door that is made from natural wood. In order to make the material lighter, a special bleaching technology is used. Ideal wood for door production is oak, hornbeam and ash. To impart whiteness, a special pigment composition is used, after which the wood is coated with a primer and varnish. But doors made of natural wood are quite expensive, so many people most often choose veneer panels for their apartments. The veneer is glued onto the MDF sheet. Such a door is inexpensive and practically not inferior to a wooden one.

There are several technologies used to decorate doors:

Giving a glossy finish . These doors are covered with enamel and attract attention with their glossy finish.
Artificial aging technique . Vintage doors are suitable for interiors with an antique effect.
Enamel coating . White enamel is still popular among interior doors due to its low cost.
PVC and eco-veneer . Such doors are not afraid of moisture and are resistant to sunlight.
Lamination . The most economical and affordable option. This door is not exposed to moisture and sunlight.

Mount the handles and strike plate of the lock

Using the supplied hexagon, loosen the locking screws at the bottom of both handles and insert the square rod into them until it stops. Attach the assembled structure to the door. The distance between the handles should be less than the thickness of the blade. If it is larger, shorten the rod slightly with a hacksaw or grinder.
Remove the decorative rosettes from the handles by unscrewing them counterclockwise along the threads. Insert the handles into their places so that the locking screw is at the bottom, and mark the locations for fastening with a pencil. Drill holes and screw in screws. Replace the decorative rosettes.
Close the door and mark the top and bottom of the latch on the frame with a pencil. Measure the distance from the edge of the canvas to the outside of the tongue. Mark this measurement on the frame and draw a line to the latch boundary marks.
Turn the striker over and align it with the center of the tongue mark. Drill holes and screw in screws to secure the strip to the frame. Trace the contours with a pencil and cut the film with a sharp knife, as you did with the lock.
Remove the bar and use a small drill to make holes along the contour of the future groove for the latch, and use a chisel to make a hole. It’s okay if the sample slightly protrudes beyond the boundaries of the marks; after installing the bar, all the gaps will close.
Using a chisel, carefully remove the film along the outer contour of the striker to make it flush with the door frame. Secure the strip in place with screws. Check: if everything is done correctly, the closed door does not hang loose.

Combination with walls

White interior doors will fit perfectly into any interior. The simplicity and at the same time sophistication of this shade allows you to solve any design ideas and experiment with wall textures. White doors go well with decorative brick, plaster and wallpaper. Moreover, there are practically no restrictions on the color scheme of the walls - these can be either bright and bold solutions or more restrained calm tones. On the Internet you can find a large number of examples of how to combine white interior doors in the interior. Let's consider the options:

Walls in light shades are an ideal solution for a living room or bedroom. Here you can give free rein to your imagination and experiment with tone, texture and materials. This can be regular wallpaper or paintable wallpaper, decorative brick or plaster. Choose the shade according to your taste; in any case, light colors will look restrained and stylish.
Walls in bright colors are for lovers of exclusivity and bold solutions. Blue, red, green or yellow walls in combination with white doors will help realize the most unusual solutions. At the same time, the light canvas will gently dilute the brightness without weighing down the overall look.
Dark walls - this option is suitable for decorating a living room. Having decided on such a design, think carefully about the details, namely what the color of the future wallpaper and texture will be. It is advisable to immediately resolve the issue of choosing furniture, the shade of which may be the same as that of the walls.

Care

Mostly, dirty marks remain in the handle area, especially in a house with children. There are many effective ways to clean a door leaf. One of them is a simple solution consisting of liquid soap dissolved in water. Or use an all-purpose detergent. Today we will analyze an old forgotten method from such incidents:

1 l. water;
1 tbsp. l. soda;
1 tbsp. l. washing powder;
3 tbsp. l. vinegar.

Versatile but difficult to care for

Take a medium-sized bowl and pour the ingredients into it. Mix the solution thoroughly with a tablespoon. We use microfiber cloths. Place in the solution, soak well, squeeze out. Carefully clean dirty places. For particularly difficult stains, you can use a melamine sponge.

Do not forget to pay special attention to fittings that accumulate a lot of dust.

Which doors to choose is your choice. But they will definitely fit harmoniously into your interior.

Combination with floor

A white interior door is a universal solution. It goes well with any floor shade. But we can still highlight several of the most successful solutions:

Combination of beige floor with white door . This is a kind of classic that never goes out of style. This choice will always be relevant, because the combination of light doors and floors will create a warm and cozy atmosphere in any home.
White with white . This color scheme is ideal for small apartments. White doors and floors will help visually expand the space of the room.
Gray floor and white door . A harmonious solution for any room, capable of refreshing and ennobling the interior.
Dark floor and light door . An ideal option for spacious hallways. Using black or brown laminate will create a spectacular interior. This solution is well suited for decorating bathrooms. White plumbing fixtures and a light door go well with black or dark tiles on the floor.

Choose the material for the flooring after you have purchased the interior doors. The thing is that choosing a door that suits both the shade and the price is much more difficult than deciding the issue with the floor. And one more life hack: give preference to the color scheme of doors and floors in one tone - warm or cold.

Glossy doors: advantages and disadvantages, the most popular options

It is impossible to imagine an apartment, country house or office without interior doors. And this is not only a matter of functionality, the door is one of the fundamental elements of decor. Glossy doors are becoming a fashionable trend in modern design, they have an affordable price and an attractive appearance, they are laconic, will look harmonious in any style of the room, and a wide range of colors will allow you to make the door a bright accent or “dissolve” it in the interior. Also, glossy doors have the following advantages:

Variety of shapes, colors and designs. Glossy canvas can fit into any interior style.
Affordable price. The cost of doors is reduced due to the use of modern equipment and materials.
Versatility. The models fit harmoniously into the interior and are combined with various types of ceiling and wall finishes and floor coverings.
Easy to care for. No special cleaning agents are required; you only need to occasionally wipe the surface with a damp cloth.
Practicality and resistance to various damages. Thanks to the processing of the canvas with high-quality materials, the door is protected from deformation, scratches and other damage, the product will not lose its performance properties and excellent appearance for a long time, and the bright colors will not fade from the influence of ultraviolet rays.
Protection against mold and mildew. The canvas, unlike its wooden counterparts, is not hygroscopic, no moisture - no mold and mildew, which means glossy doors are ideal for rooms with high humidity, for example, the bathroom.

There is only one drawback - the soiling of the surface. The door requires careful daily care. Even dust is visible on glossy black; fingerprints will be visible on a glossy surface of any color, especially in the handle area. For these reasons, it is not recommended to install such doors in children's rooms, because kids love to close and open them without using the handle.

When choosing a glossy door, it is important to remember that a large number of shiny objects in the room looks tasteless, and against the background of matte surfaces the gloss looks more intense and richer

Surface fabrication

The manufacturing process for glossy doors is almost identical for all manufacturers. The first stage of production is the manufacture of the frame. The filling has a porous structure, which makes the door quite light. The frame and filler are covered with an MDF sheet about 5 mm thick. Only after this does the application of the decorative layer begin. Sometimes for these purposes, natural wood veneer is used, which is filled with varnish. The decorative coating itself is made in two ways: varnishing and polishing.

Varnishing

This is the simplest method. A shiny varnish of any desired shade is applied to the surface. The varnish is applied in several layers, this is necessary to obtain a rich, deep shade of the mirror surface. Each new layer is applied after the previous one has completely dried, this is the only way to achieve a high-quality, durable coating. The cost of such canvases is lower, but they have a significant drawback: the varnish coating may crack if the door is exposed to low temperatures for a long time during storage at the manufacturer or in a store.

Polishing

The essence of this method is that the enamel is applied to the door leaf in a vacuum room. This allows for uniform application of layers and also helps maintain the integrity of the coating. When the enamel is completely dry, polishing of the surface begins using high-tech equipment. This procedure is carried out several times until the door acquires a bright glossy shimmer. Polishing is a more complex process than varnishing. Polished doors are characterized by increased wear resistance, as the adhesion of the enamel to the door surface improves. Unfortunately, this significantly increases their cost.

Video: applying gloss to the door surface

What should you not combine with?

White color goes well with all shades. But there are still situations when a white door is inappropriate and does not fit into the overall style of the room. Here are a few nuances to consider:

Don't choose ivory wallpaper . Against the background of a snow-white canvas, this shade will give the walls an unwashed look.
Don't combine a white door with a bright brown or dark beige floor . This design looks cheap.
Avoid combining a white door and floor with a floral pattern in the bathroom . This solution will look more like a country house rather than a modern apartment.
Add additional white elements to the interior of the room . One light canvas will not look very good against the general background. There must be harmony in everything.

Lacobel glass

Lakobel (LAKOBEL) is transparent glass, one side of which is covered with an even layer of paint (varnish). The technology used by the manufacturing plant makes it possible to achieve color constancy and uniformity, high adhesion of paint to glass and environmental safety. The paints used in the production process do not contain heavy metals or chemicals that are harmful or hazardous to the environment.

The paint and varnish materials used in the manufacture of LAKOBEL glasses can withstand temperatures up to 80 degrees C. and are resistant to light and ultraviolet radiation. The color of the glass does not fade or change over time.

Properties of Lacobel:

Fire resistance

The paints and varnishes used in the manufacture of Lacobel glass can withstand temperatures up to 80 degrees C.

Resistance to light and ultraviolet radiation

Lacobel brand glass is resistant to light and ultraviolet radiation. The color of the glass is ensured during the production process and does not change subsequently.

Moisture resistance

Any Lacobel brand glass can be used in a damp environment, but should not be immersed in water. Measures must be taken to prevent water from getting onto the back of the glass.

Personal safety.

It is possible to apply a transparent polypropylene film to the back painted side of Lacobel glass. It has a double meaning:

if the glass breaks, the fragments remain on the film, preventing injury and damage;
The film protects the painted surface from scratches.

How to install the door correctly, with the glossy side facing the room or the matte side facing the room? (glass)

The gloss in the room, with the door open, will “admire” its matte side. I install doors to give the hallway a shine.

atmanMaster (1943) 9 years ago

This is if you put a door so that it opens into the room, usually they put it so that it opens into the corridor.

::R. and. i. O. $. e: The Thinker (6652) In general, it’s usually just the opposite (open doors in the corridor interfere with passage). But if your door opens into a corridor, put it in glossy style into the living room.