How to make a ceiling rain shower from pipes with your own hands

(9)

When it comes to changing the design of the bedroom or transforming the kitchen decor, ideas are overflowing. But if you need to improve such a practical area as a bathroom or shower, doubts arise.

Designers advise their clients to “tropical shower” - a mixture of functionality and heavenly bliss.

It is also called an overhead or rain shower. The peculiarity lies in the location of a special “rain shower” nozzle in the ceiling.

How to make such a rain shower?

Special product for hydromassage

Probably everyone remembers how great it was to run down the street in the summer rain as a child. This creates a pleasant sensation, since from rain a person receives the energy contained in the flow of water, and the drops falling on the body help the muscles relax. To create this effect, a special type of shower was invented, called “tropical rain”, since it successfully imitates rainfall.

Appearance of a rain shower

When people talk about this plumbing device, they usually mean a huge watering can attached to the ceiling. Many streams of water are enough to completely cover the entire body of a person standing under it. It is clear that it is simply impossible to achieve the same effect using a conventional nozzle attached to a removable hose. Among other things, large spray heads have a water supply switch, with which you can stand in a heavy downpour or relax under large drops of rain.

Therapeutic effect

The positive effect of a continuous flow of water in “tropical shower” systems has been used in sanatorium and medical institutions for quite a long time. Typically, the use of tropical systems involves the use of different temperatures, as well as light and color therapy, the beneficial effects of music and even aromatherapy. The shower itself has a relaxing and light massage effect; drops of water, falling from a great height under the influence of natural gravity, gently envelop the skin, allowing the body to relieve the stress of a tiring day. A cool shower with medium-strong jets, on the contrary, can set the body up for active activity, and a more powerful water pressure tone the muscles.

Tips for making and decorating

You can make a watering can for an apartment or private house at home in a single-color version. But it is unlikely that such a thing will attract admiring glances and will please anyone, including the owners. After all, an exactly similar tool can be easily purchased in a store. Sometimes they use juicy bright stickers applied to the surface. But completely covering the watering can is not recommended, because uncovered stickers will quickly deteriorate and peel off.

Only covering with tape helps to avoid the destruction of such decorations. However, it is unlikely that a surface covered with tape will look aesthetically pleasing. Experts advise supplementing watering cans with sprayers. Drip irrigation of house flowers helps refresh the leaves.

But in order to eliminate mistakes, it is necessary to take into account the characteristics of a particular culture.

Comparative table of sanitary installation heights. devices - SNiP and European standards

• Unless otherwise stated, all values ​​are based on the finished floor level. For example, the value “Sink: 850 mm on VK” contains an instruction to install it so that the upper edge of the sink (VK; top of the side) is at a height of 850 mm from the surface of the finished floor (covering).
• NK - the value is indicated along the lower edge.
• VK - the value is indicated at the top edge (at the top of the side).
• C - the value is given according to the mark of the corresponding axial mowing line (horizontal or vertical).

When did toilet paper appear in Russia?

We think that you will be interested in learning the history of toilet paper production in our country. Here's what information was published as part of TheQuestion project:

“The production of toilet paper in the USSR began only in 1968, when two English paper-making machines were installed at the Syassky pulp and paper mill (Leningrad region). The launch took place on November 3, 1969, but the first batch of hygiene products encountered zero interest from consumers: Soviet citizens simply did not know what it was intended for. Only after a large-scale advertising campaign (videos about toilet paper from the Syassky plant were shown before screenings in cinemas) did a real boom begin. The personal hygiene product, so familiar all over the world, immediately became in short supply in the USSR and until the 80s it could only be obtained by standing in a huge line.”

So, the need for a toilet paper holder arose relatively recently.

The materials on this site are not a public offer. Any calculations using online calculators are indicative only. Their results cannot be used in the preparation of any project documentation (see also - rules for using the site).

Sources:

https://sam-brigadir.ru/vysota-smesitelya-v-dushe-ot-pola.html https://setafi.com/vanna/kakoj-dolzhna-byt-vysota-smesitelya-v-dushe/ https:/ /vse-o-trubah.ru/na-kakoj-vysote-nuzhno-stavit-vodorozetki.html https://kak-sdelano.ru/sanuzel/vyisota-smesitelya-nad-vannoj-ot-pola https://www .attractif.ru/remont-sanuzla-normy.php

Technological process for assembling a tropical shower with your own hands

It is worth noting that of all the plumbing fixtures that you can assemble yourself, the easiest one is to make an overhead rain shower with your own hands. The assembly process is quite simple, and most importantly, nothing special is required. To work, you will need to prepare a large watering can, mixer and water pipe.

You can, of course, perform an open installation of the system, but it is better to prefer a hidden installation, in which the mixer is built into the wall. It is advisable to combine the installation of the system with the next repair, but do it before laying the facing begins, since it will be necessary to hollow out grooves in the wall. The implementation of the idea of ​​installing a tropical soul house should be carried out in stages:

1. At the first stage, it is necessary to lay out the pipes. Why is a system of several grooves built?

   Wiring for a watering can and tropical shower

   In the middle of it a recess is created for the mixer. And from the recess it will be necessary to remove 4 grooves, into which pipes will be laid that supply water to the mixer, fill the bathtub and direct it directly to the watering can.

2. At the next stage, prepared pipes of the required length are laid in the grooves (it is better to choose copper or polypropylene products for hidden installation). The pipe to the shower head runs up along the wall and slightly across the ceiling all the way to where the sprinkler is located.

   Installation of pipelines in the bathroom

   On the ceiling it can be laid in a groove or secured with metal clamps. If in the future it is planned to install a suspended ceiling, then the pipe is not brought to the main ceiling. Suspended ceiling structures allow you to hide the pipe, leaving only a watering can on the surface.

3. At the last stage, the nozzle and lever for controlling the mixer are installed. When screwing the spray nozzle onto the pipe, you need to place tow or FUM tape.

After the watering can is securely fastened, you can take water procedures, but it is still better to do this when the renovation work in the bathroom is completely completed.

Construction stages

One of the main steps to fulfilling the idea is purchasing the necessary equipment and planning. There is no point in saving on plumbing components; after the work is completed, it will be problematic to make adjustments; you must be confident in the equipment. The ideal purchase option would be models from well-known brands; manufacturers value their reputation and monitor the quality of their products. Reasonable design can also eliminate possible problems in the future; access to the main components should be considered in order to replace them in the event of a breakdown without dismantling the covering of the walls and ceiling. Another condition for achieving the maximum effect from a rain shower will be a ceiling height of at least 2.3 m.

The next step is to clean the old wall coverings and, if necessary, the ceiling and floor.

After transferring the drawings from paper directly to the walls and ceiling, you can begin laying pipes. The ideal option is to cut grooves under the pipes; this installation method will save as much space as possible in the room. It is possible to equip a separate shower area from moisture-resistant plasterboard, then the pipes can be “hidden” directly into the partition. Entrance doors should be considered; for example, when installing models on casters, you need to strengthen the floor covering under the lower runners.

Installation of special lighting may require an additional electrical line and installation of associated electrical equipment. It should be ensured that direct flows of water do not enter the connection points and, in general, any non-insulated current-carrying parts of the electrical system. The ideal would be a hidden installation in the ceiling, which can be made in a suspended or tensioned version especially for these purposes. Apartment owners should consider possible leaks from neighbors above and protect those below. To do this, it is necessary to carry out enclosing waterproofing of electrical equipment in the ceiling and complete waterproofing of the floor.

The next stage will be installation and testing of all plumbing elements of the system.

After making sure that the connection is in good working order and correctly, you can begin arranging the ceiling and cladding the walls and floor.

Advantages and disadvantages of a homemade system

Compared to an industrial system for supplying water to the root zone, homemade watering options through plastic bottles have slightly different pros and cons.

Advantages:

• as already mentioned, this is a reduction in the cost of installing the system. There are plastic bottles in almost every home; there is no need to buy them separately;
• You can not filter the water or get by with coarse filtration from the country water supply. Thanks to the design of homemade “drippers”, they are not in danger of rapid clogging. If watering with bottles is carried out in clay soil, which quickly “tightens” the holes in the droppers, it is not difficult to replace the damaged bottle;
• by changing the volume of containers used, you can adjust the duration of autonomous watering (12…120 hours);
• reduction of water consumption and the possibility of irregular replenishment of the supply. This is especially significant for those areas where there is no permanent water supply or it is limited.

Flaws:

• Watering the beds with bottles requires periodic replenishment of the water supply in them. This can be done using a hose or bucket/watering can, but only by hand;
• impossibility of automation.

A separate advantage for summer residents is the ability to arrange watering through bottles only in certain areas, including those inconvenient for constant access or located remotely from each other. Here, the absence of tapes connecting the droppers and the main water supply only serves to save money.

Top best manufacturers

Many users of rain shower systems are faced with incorrect operation or too rapid failure of the equipment. Most often this happens if you purchase a cheap model from an unknown manufacturer. To ensure that the system works for a long time and does not fail, you should choose equipment from trusted companies.

The most popular manufacturers:

Grohe (Germany)

The company offers designs made of chrome-plated material with rods 90 cm long, which have an adjustable distance between wall mounts. The set includes a cylindrical hand shower with a hose up to 175 cm and a convenient watering can, plus a single-lever mixer. On top there is a swivel bracket on a hinge. The diameter of the watering can is 18 cm, its jets evenly distribute flows over the entire area of ​​the diffuser. Adjustable water flow. The shape of the top watering cans is round, rectangular or square. Some models are equipped with bath thermostats.

Otler (UK)

Implements built-in designs of premium quality. Models differ in the shape of the watering cans, the number of nozzles, lighting, and materials of manufacture. The system is made of glass, chrome-plated steel, and is additionally equipped with a touch screen for convenient control and an adjustable irrigation mode.

Hansgrohe - a company from Germany

It produces a wide range of shower stands equipped with shower heads of various shapes and sizes, and LED lighting. Manufacturing materials: chrome steel, brass. The products are distinguished by their simplicity, modern design and durability.

Novellini (Italy)

Produces shower panels. Many models are complemented by seats, footrests, shelves, mirrors, lighting, and a thermostat.

You should not believe the excessively low prices of models from unknown manufacturers. An unscrupulous seller is able to offer an ordinary, but large-sized watering can, from which it is impossible to obtain the effect of tropical rain.

Filling the tank and heating the water

Water can be poured into the tank manually using buckets or using a hose. In the second case, you will need a valve to turn the water supply on/off.

How to auto-fill a tank

Some summer residents organize an automatic tank filling system. This is done using a float. The water supply to the shower is located close to the ground surface, because here the water is warm. On the opposite side there is a pipe for drawing water into the tank. All other pipes perform a protective function: if the float fails, excess water is drained through it.

Another pipe, equipped with a tap, serves to completely empty the system before the winter cold. It is recommended to turn off auto-fill before leaving.

Tank in a summer shower.

Organization of heating

Heating the water in the summer shower tank can be done naturally or forced. In the first case, the tanks are heated by the sun. Sometimes summer residents attach a collector for better heating. To do this, two pipes are welded to the tank, and a hose is welded to them, which is placed in rings or a snake on the illuminated side. Water will move through this tube and warm up.

When forced heating, stainless steel heating elements with a power of 2 kW are built into the barrels. Metal washers with rubber gaskets are put on the fittings of the electric heater on the inside of the tank, and nuts on the outside. To regulate the water temperature, two tanks are placed on the roof of the shower, one of which contains cold water.

What determines the installation height of the mixer?

It is important to note that all the figures indicated above are only recommendations. After all, the premises and requirements of different consumers differ from one to another and are unique. For this reason, height of the crane will always be different. This parameter, and the installation method itself, depends on various factors. One of them is the type of mixer.

Each of them needs to be mounted at a different height (as indicated in the previous paragraph). If two taps are installed for the bathtub and sink (that is, for each of the bowls), then the mixer that you will use only for the bathtub can be mounted at a distance of 20–25 cm from its upper edge.

If you plan to use only one faucet (with a long spout) for both devices, then the installation height above the upper side of the bath should be at least 30 centimeters. It is recommended to install the faucet above the sink at a distance of at least 25 cm from its top edge. This height is optimal so that the consumer can easily wash their hands, wash themselves and perform the entire set of hygiene procedures.

Unusual DIY watering can

If the option with an original small watering can does not suit you, and your plans include watering a large number of flowers planted in open ground, the idea of ​​a large original watering can will certainly come in handy.

• Take a bottle of some detergent and paint chaotic lines on it using regular paints. You will get an interesting avant-garde style watering can, on which dirt will not be too noticeable. To prevent the design from being washed off, cover the watering can with a varnish coating. Such a watering can can also be left in the yard if you have an alpine hill, near which decorative elements look great.

However, a watering can can be a simple decoration for the interior or landscape design of the site. Even if you only have artificial flowers, it doesn’t matter, you can put a watering can next to them, it will only decorate and add aesthetics to the atmosphere.

Installation height of plumbing fixtures: SNiP requirements

The installation of sanitary ceramic products should be carried out in accordance with the requirements of SNiP 2.04.01-85, technical conditions and instructions of equipment manufacturers. The height at which sanitary fixtures are installed should be taken in accordance with SNiP 3.05.01-85.

At what height should a shower head or rain shower be installed? Finishing works Tyumen.

When purchasing plumbing fixtures, the presence of invisible cracks is determined by ear by tapping the product, located on a wooden stand, with a wooden hammer weighing about 250 g. A product that has cracks makes a rattling sound when tapped.

The presence of nicks and scratches is determined visually by wiping the surface of the product with a cloth soaked in a 0.1% solution of methylene blue solution. If there are nicks or scratches, they are filled with a blue solution and are detected visually without the use of magnifying devices.

Advantages of a rain shower head

• A pleasant shower with a relaxing effect . What does the body require - raindrops or a whole waterfall? A tropical shower gently envelops you in pampering and comfort, providing a miniature rain cloud of the desired temperature.
• Chic design . These watering cans look stunning. They delight in size and unique style. A quality shower head can transform an old shower into a penthouse apartment experience.
• Large coverage area . The rain shower does not leave a single dry spot, covering the lucky person with gentle drops from head to toe. The large watering can with evenly distributed holes creates a stunning tactile sensation.
• Possibility of choice . Multi-options adapt to a person’s mood. A rain shower will satisfy every desire. Choose from the freshness of pouring rain, relaxing hot water or massage pulsations for tired muscles. How to choose the optimal watering can? When creating a cozy rain shower in your home, there are a few things you should know about the shower head.
• Size . The most comfortable shower exists according to the rule: the larger the shower head, the better. Most of the best models range in diameter from 20 to 25 cm.
• . It is not necessary to chase leading brands of sanitary products. It is enough to read the reviews of other people and compare them with the capabilities of your bathroom.
• Design and functions of the watering can. If a rain shower is associated with minimalism and naturalness, you can limit yourself to a simple watering can with one mode. If you want to feel the magic of raindrops in all its glory, you need to choose multi-optional watering cans that can switch between hydromassage, drip and storm water supply.

• Fastening . How is the model designed: for wall or ceiling mounting? How will it fit into the bathroom? The entire shower system may need to be replaced.

A few ideas

A horizontal shower looks unique and outlandish. Many small watering cans allow you to achieve a state of complete relaxation, free from stress and muscle tension. It might even be better than a bath.

The owner of a country house would probably like to have a shower that opens onto the garden. A double glass door can be an additional window. This rain shower comes with a vertical wall stand and a square shower head.

Rain shower integrated into the open space of the house. An illuminated ceiling shower, granite and glass walls create an overall unusual design.

This shower is equipped with a huge shower head, divided into six parts. Additional water features and spa décor provide a resort-like experience.

Some shower heads are temperature sensitive and can change color. You can create your own ideal atmosphere using additional local lighting.

A frame for a tropical shower made of wooden logs - why not an option? They can completely transform your bathroom decor. The stone floor is another bright accent.

This tropical shower is the easiest way to achieve a state of “zen”. The mirror panel on the ceiling evokes the glow of the night sky. It reflects all the charm of the decor. Plants are a great addition to this design.

The rain shower, hidden behind a glass veil, takes center stage in this bedroom apartment. It's like a quiet haven in a blue lagoon: beautiful and natural. Although it performs a practical function, simultaneously separating and connecting different areas of the apartment.

LED strips built into the ceiling enhance the overall impression of the shower room: with the help of a clever arrangement of lighting fixtures, you can achieve a real optical illusion - mesmerizing and sophisticated.

LED lamps especially highlight the tropical shower in a minimalist style. Transparent glass walls do not block the surrounding space, making the room airy and weightless. Turquoise accents look incredible in gray tones.

Despite the rather simple and unassuming design of the shower head, this shower attracts with an atmosphere of harmony and peace. Its shape and combination of materials will please the most demanding customer. After a pleasant relaxation in the bath, the muscles are toned under the powerful drops of the shower head.

Only a glass wall separates such a shower from absolute fusion with nature. Suitable for owners of country houses with maximum privacy.

Shower tank

Tanks made of metal or plastic are in great demand. Water in plastic barrels heats up slowly, which is why many summer residents use metal tanks. Among the latter, there are barrels made of plain metal and stainless steel. To improve heating, they are painted black on the outside. Metal tanks are susceptible to rust: within 1.5-2 months after installing the tank, its inner wall becomes covered with rust. Therefore, if finances allow, it is recommended to use stainless steel tanks.

Installation height of the mixer above the bath

Standard option

Of course, you can install the product at different heights. After all, this is just a faucet, and the apartment is the resident’s personal space. Despite the fact that it is located in an apartment building (although this should be taken into account). For this purpose, a distance standard is established according to SNiP (SP) standards. The distance at which the device should ideally be installed is shown in the table below.

This height of the faucet above the bathtub from the floor is more common, and this is not surprising, because this is the standard. But you don't have to follow these rules.

For example, if everyone who uses it is short, then you can make the distance from the floor 750 millimeters.

If there is no understanding of the issue, it is better not to deviate from these standard figures for the installation height of the mixer. Then in the future there will be no problems either in operating the device or in servicing it.

Minimum height from the floor according to GOST and SNiP (SP) standards

Let us note what was taken into account when drawing up the standard:

• ease of use for a person of average height;
• the degree of repulsion of the water flow and individual drops from the bottom of the container;
• average water pressure in urban apartment buildings.

Rules are established mainly on the basis of practical experience and the conclusions of many generations. If something changes in the future, it will only happen in two cases: if the design of the average product changes, or if the average height of the person himself changes.

Installation diagram of a faucet over a bathtub and sink

If we talk about how convenient such a standard according to SNiP (SP) is for a family, then in general most people will be comfortable if the product is fastened in this way. Of course, it will be difficult for children to reach it.

However, there is no serious problem here. After all, usually, when a child cannot even reach a faucet located according to the standard, he does not need it. And sometimes it's dangerous.

For older people, the standard height placement of the mixer will be optimal. So it’s better to do this and arrange the device according to the rules.

Typical faucet dimensions and spout length

After all, most people have always had something like this in their past. And then we developed body memory, which allows you to do things automatically without wasting energy, which is not a lot.

For a middle-aged person of standard height, the installation will be a little more comfortable than others, but still comfortable. After all, if we are talking about a typical Russian apartment, then the bathroom is used not only for washing. Many people perform housekeeping-related activities in it.

Drawing of the location of plumbing fixtures

Peculiarities

It is often believed that a watering device is just an everyday tool. However, this opinion is held mainly by people far from farming. Any gardener knows very well that even such a utilitarian device has more than just functional significance. You need to think about how the design fits into the design of the surrounding area or apartment.

You can make a watering can for an apartment or private house at home in a single-color version. But it is unlikely that such a thing will attract admiring glances and will please anyone, including the owners. After all, an exactly similar tool can be easily purchased in a store. Sometimes they use juicy bright stickers applied to the surface. But completely covering the watering can is not recommended, because uncovered stickers will quickly deteriorate and peel off.

Only covering with tape helps to avoid the destruction of such decorations.

However, it is unlikely that a surface covered with tape will look aesthetically pleasing. Experts advise supplementing watering cans with sprayers. Drip irrigation of house flowers helps refresh the leaves.

Shower set with rain shower or separate accessory?

The principle of a rain shower head is similar to that of a traditional shower head, so it boils down to dispersing the stream so that it covers a larger area than when it flows directly from the spout. It also creates ideal conditions for rest and relaxation, under running hot water. Rain showers are usually available in two varieties:

• as a separate accessory, which then needs to be connected to the shower mixer,
• as an integral part of the shower set .

How are these two solutions different? It basically comes down to how it's put together. When you choose a rain shower faucet , you receive a ready-to-install kit that creates a seamless whole. If you only buy a rain shower, installing it shouldn't be difficult for you either, because with it you'll likely get a flexible hose to connect to your shower faucet. However, you should pay attention to the matching style of these two elements.

Homemade options

Home craftsmen are ready to use their skills wherever possible, and can build a rain shower from scrap materials. A DIY watering can to achieve the effect of a rain stream is easily made from an optical disc container designed for 10 pieces. A plastic adapter to the shower hose is installed in the center of the base, the central axis of the discs is removed, and holes are marked and pierced on the upper surface of the cover: from 20 to 40 pieces. All joints and fastenings must be sealed, and a piece of rigid tube or a bracket with thick wire can be used as a holder.

Depending on your resourcefulness and availability of materials, you can implement other options for the “tropical shower” system with your own hands. What can it be made from, if not from standard plastic pipes completely and even backlit? This design involves a complete replacement of the watering can with several adjacent pipes with holes for water. The manufacture of such a structure will require at a minimum pipe connection skills, as well as other construction skills and knowledge in the field of electricity. It is difficult to judge how profitable it is to use several pipes instead of a common collector for all nozzles, and the setup of home-made systems is limited by the capabilities of the mixer.

Tips on how to mount a stand into a wall

Installing a shower stand will be easier if you take into account some tips. First you need to prepare a niche or make a recess for laying pipes. You should make a fine 12-15 cm wide and 9-11 cm deep. To make holes, use a hammer drill with a drill of a suitable diameter.

Next you need to act in the following sequence:

1. We determine the installation location of the watering can and spout.
2. We make markings using a pencil.
3. We drill the wall with a hammer drill according to the indicated markings.
4. We draw a line to the central water supply.
5. We make recesses to the central section of the mixer.
6. We lay pipes in the recesses and connect them.
7. We make outlets for the spout of the watering can and mixer.

Installation safety precautions

To avoid unpleasant consequences when installing a shower yourself, consider the following rules:

1. Before starting work, all valves and meters must be closed. This will eliminate the risk of a sudden flood.
2. When using electrical appliances, you should wipe your hands dry.
3. Children should not be allowed near the work site. They can swallow small parts that are scattered on the floor.
4. Installation begins only after reading the manual.

If you have fear or doubt, it is better to entrust the work to experienced craftsmen.