Many people prefer to spend the summer at their dacha. And this is not surprising, because this is where you can hide from the bustle of the city and the unbearable heat. But to make your stay in a country house as comfortable as possible, you need to think about building a structure such as a country shower. To implement this idea, first of all, you will need imagination, because the building must be not only practical, but also beautiful. In addition, you need to decide on the materials from which the construction of the shower will be ordered, because this is one of the main components of the “issue price”.
Some shower stalls don’t even have to be built - they are delivered from the store ready-made Source arhdecor.ru
Pros and cons of a summer shower
Today, summer showers of various designs are used to furnish summer cottages and houses. Each of them has its own advantages and disadvantages. This is worth considering when choosing a design. Popular options include:
- Film shower. The structure consists of metal and wooden elements that are covered with film. The disadvantage of such a shower is its fragility. As for the advantages, we can highlight ease of installation and mobility. If desired, it can be easily moved from one place to another. Metal corners are often used for construction.
- Frame construction. The shower is a stable and monolithic product that has a long service life. The design is well ventilated, and the water heats up quickly. It is easy to serve and comes off just as quickly. As for the disadvantages, it is worth highlighting the vulnerability to negative environmental factors. During operation, the structure loses its attractive appearance.
One of the most durable solutions is a summer shower made of polycarbonate Source demidovo52.ru
So, having analyzed all this, we can note several main advantages of a summer shower:
- efficiency;
- ease of installation;
- practicality.
As for the disadvantages, among them we can highlight the limitation of use. The fact is that in such structures, water heating is most often carried out from solar energy. Therefore, they cannot be used in the cold season or in bad weather.
Preparatory stage
- The site for installing partitions is cleared of debris and dirt.
- To prevent damage to finishing and facing materials, the installation work area is protected with covering materials (plywood).
- Installation of shower partitions is carried out only if there is a diagram of plumbing and electrical communications, so as not to damage them during the installation process.
- The glass panels are carefully removed from the packaging and the packaging corners are removed from them.
- Using a building level, mark the drilling locations for the holes.
- At the drilling points, the surface is punched with a center punch. After this, using a drill, holes are made corresponding to the size of the dowels.
Types of summer shower
Various materials and technologies are used to make a modern shower. When choosing, you should rely on financial capabilities and other equally important factors.
Wooden shower
A wooden cabin is a popular and common option. This is due to the fact that it is very simple to implement. For construction, environmentally friendly material is used, which has many advantages. The only drawback is low resistance to moisture and insects. Therefore, wooden elements are treated with antiseptics. Timber and boards are used for construction. The best option would be coniferous wood, as it is highly resistant to humid environments.
Combination options are often offered - shower plus toilet Source seattlehelpers.org
A wooden shower in the country is performed in the following sequence:
- The shower is a frame structure, which consists of racks of a certain section. When choosing timber, it is worth considering the load that will be created by the storage tank.
- Holes are dug under the posts, the depth of which is 80 cm. A cushion of crushed stone and sand, 10 cm thick, is made at the bottom.
- To protect the timber from rotting in the ground, it is coated with bitumen and wrapped with roofing felt. After this, they are installed in the hole and leveled. Additional racks are installed in the places where the doors are mounted.
- The racks are connected at the bottom and top by horizontal bars. Bolts or angles are used to fasten them together.
- The sides of the cabin are finished with sanded boards. After this, all elements, including doors, are treated with paints and varnishes.
During construction, it is worth considering a method for draining waste water. As for its supply, storage tanks are installed on the roof, which have different shapes and volumes.
You can order the construction of a full-fledged open-air bathroom Source emupauto.ru
Polycarbonate construction
This design is somewhat simpler to construct. To perform the work you will need a welding machine. This is necessary for the construction of a metal frame. A profile with a cross-section of 40x60mm is used as racks. Smaller products are used for strapping.
Installation of the frame is carried out in the same way. The racks are concreted in pits. Jumpers are attached between them, which will add rigidity to the structure and will also be used to fasten the polycarbonate. A durable frame is welded on top on which the water tank will be installed. After this, the entire structure is covered with waterproof paint.
For finishing, opaque polycarbonate sheets are used, the thickness of which ranges from 6 to 10 mm. A circular saw is used to cut the material.
A polycarbonate shower warms up like a greenhouse Source prosamodelki.ru
Corrugated shower
As a summer shower, you can also use a structure made of corrugated sheets. This material is lightweight and distinguished by its durability. To construct the frame, wooden blocks and a metal profile of a certain cross-section are used.
The construction of the shower follows a similar pattern. The racks are connected by a transverse profile, which will add rigidity to the structure. To fix the finishing material, galvanized self-tapping screws equipped with sealing washers are used. The doors are made of a profile frame, which is sheathed with corrugated board. To cut the material, use metal scissors or a grinder with a toothed disc.
Neat booths made of corrugated sheets Source tltext.ru
See also: Contacts of construction companies that offer metal structures installation services.
Brick shower
To build a shower stall from brick, you need to make a shallow foundation. To do this, dig a trench 20 cm wide and 40 cm deep along the perimeter. To save on the construction of the foundation, broken brick or stone is thrown into the concrete solution.
When the concrete has hardened, laying is done with cement mortar. At the same time, a doorway of the required dimensions is arranged. The door can be made of wood or a metal frame covered with corrugated board. Bars are laid on top of the masonry, which will serve as the basis for the roof and the installation of a water tank.
Brick is a permanent building Source ydachadacha.ru
Faucet selection
The shower mixer should not have a long spout to collect water, because... it will interfere with hygiene procedures.
There is a large selection of such products on sale, which differ both in appearance and installation method, type of control, which allows you to choose the right model.
By what criteria to choose
To choose the right shower mixer, you need to consider the following:
- Design. Depending on the design of the bathroom, the appearance of the equipment is chosen. There are models in the style of Provence, avant-garde, classic, etc., so it’s not difficult to find the right one.
- Material. Silumin products are cheap and light, but fragile and therefore do not last long. Brass faucets are the most reliable, they are heavy and resistant to corrosion. Bronze devices look beautiful, last a long time, but are expensive. Ceramic and glass-ceramic products have an unusual design, are not afraid of hard water, but do not react well to sudden temperature changes. Some faucet parts are made of stainless steel and plastic.
- Protective covering. Metal products are nickel or chrome plated. The first option is cheaper, but allergic reactions may develop upon contact with it. The chrome coating is hypoallergenic, durable and beautiful.
- Design features. Valve models have separate taps for cold and hot water. The mixers are inexpensive, but it is inconvenient to control the temperature; the seals in the taps must be changed frequently. In single-lever devices, it is easier to control the water flow; a ball valve or a removable cartridge is used for this. Thermostatic devices allow you to adjust the water pressure and temperature regardless of the pressure in the main line. Touch faucets have electronic settings and controls.
- Fastening. Depending on the model, faucets can be mounted on the wall or built into it, embedded into the side of the bathtub. For self-installation, wall-mounted devices are better suited.
When choosing a faucet, design and material are taken into account.
Leading manufacturers of sanitary ware
Among the most popular manufacturers of plumbing fixtures, it is worth highlighting the following:
- Grohe is a German company, its products are high-quality and reliable, the guarantee for trouble-free operation of mixers is up to 10 years;
- Hansgrohe is a German manufacturer, its products are mainly designed for small bathrooms;
- Jacob Delafon is a French brand, its models are distinguished by their unusual design, high quality, and a guarantee of up to 5 years;
- Oras is a Finnish company that produces modern faucets that have an optimal price/quality ratio;
- Roca - products of the Spanish brand are distinguished by their unusual appearance, high reliability and long service life, but their price is appropriate;
- Vidima - this Bulgarian manufacturer produces simple and reliable plumbing fixtures that are affordable to any average family.
Choosing a location on the site and installing a base for a summer shower
When building a summer shower at the dacha, special attention is paid to the choice of location. It is worth considering some factors:
- The water should warm up well. Therefore, the structure is mounted in a sunny place. Trees and buildings will cast shadows on the cabin, which will negatively affect solar heating.
- When choosing a place, you should consider your preferences. So, the structure can be placed near the house, in the garden or near the pool, if there is one on the site.
- It is better to install the shower stall on a flat area, near which there is a place for water discharge. Otherwise, you will have to do complex wiring.
- The structure should be located near the house.
To make the right choice, you need to carefully inspect your site. It is also worth considering the features of constructing a shower. First of all, this concerns the need to build a foundation for the cabin.
It makes sense to install an outdoor shower only in an open, sunny place Source domadachi.ucoz.ru
Common self-installation errors
Most often, inexperienced craftsmen make the most common mistakes when installing showers:
- structures are insufficiently sealed, which leads to leaks and increased moisture in the room;
- make incorrect calculations when arranging the drain, which leads to slow drainage of water;
- the guides along which the doors move are confused - this leads to the doors coming out of the grooves and may even fall out and break.
For those who do not have specific skills in this area, it is recommended not to install shower partitions on their own. It is better to invite real professionals in their field for this, who will carry out all the work efficiently, quickly and inexpensively.
Installation of a shower cabin
A shower cabin in a country house can be made locally or purchased in a store. Today the market offers a wide range of ready-made structures. When choosing them, it is worth considering the following factors:
- Size. The shower stall should be easy to use for all family members. Therefore, it is worth relying on the largest user.
- Material. The cabin should fit optimally into the landscape design. The material must also be highly resistant to negative environmental influences.
- Storage tank size. On average, one person consumes 35 liters of water while taking a shower. Therefore, when choosing a tank, you should rely on the number of family members. The container should have a small reserve reserve.
- Price. There are designs on the market in a wide price range. So, you can purchase a product for 5 thousand rubles or 15 thousand rubles.
Even the most economical option will be quite functional Source seattlehelpers.org
Turnkey installation price
It is quite difficult to say definitely how much it costs to install glass partitions in a turnkey shower room, because... the price is influenced by a number of factors. In any case, installing a turnkey shower is much more profitable financially than installing it yourself.
The price depends on the overall complexity of the design, the wishes of the customer, the dimensions of the room, the materials used, and design solutions. On average, the cost of 1 m2 of installation of a shower enclosure ranges from 1200 to 2500 rubles .
Since specialists in this field will give a long-term guarantee for all work performed, and the high-quality result of installing a shower will allow owners to enjoy not only a pleasant bathing experience for a long time, but also a stylish and modern appearance of the bathroom.
Insulating a summer shower
Why insulate a simple summer shower if it is used in the warm season? The fact is that carrying out thermal insulation work will significantly extend the life of this structure. The main thing is to properly insulate the perimeter. For this use:
- Mineral wool. This is an environmentally friendly material that is very easy to install. The mats are laid into the frame, after which it is sheathed from the inside. To prevent moisture from entering the material, it is covered with an impermeable film.
Shower frame prepared for installation of insulation Source seattlehelpers.org
- Glass wool. If desired, it can be used to insulate the shower at the dacha. Of course, you need to be careful when working with it and carefully follow the installation instructions.
- Waterproof foam. It is a modern material that is optimally suited for insulating outdoor showers. To do this, it is enough to use slabs 5 cm thick. They are laid in a frame, on top of which the interior walls are finished.
The insulation of the structure allows it to be used even in bad weather. Of course, it is worth understanding that thermal insulation is only relevant in the case of closed shower stalls.
Main stage
Step-by-step instructions for installing glass shower partitions directly depend on their type of construction.
All-glass partitions (frameless installation method) are installed as follows:
- Using a building level, the floor, walls and ceiling are marked.
- Next, the profile is installed, and the tires are fixed along the marked lines. Rubber gaskets are placed under them in advance.
- The next step is to mount squares on the tires with a pitch of 80 cm. They are secured with dowels.
- Silicone seals are placed on the glass.
- Fixed walls are installed in the shower.
- Before the walls are completely secured, doors are hung on them and their correct position is adjusted. Please note that when the doors are closed, the seal must fit snugly to the mounting surface and to the edge of the pan.
In order not to damage glass partitions during installation, it is not recommended to tighten them tightly with screws or self-tapping screws.
The installation process for framed glass partitions is as follows:
- First, all structural elements (except doors) are connected. That is, the frame is assembled and glass elements are installed with special clips.
- Next, markings are carried out on the floor and walls at the places where the partitions are attached.
- The necessary holes for the fixing elements are drilled.
- Partitions are installed according to markings and attached to surfaces with dowels and screws.
- The final stage is sealing the joints with sealant. Afterwards you can begin installing the sashes and fittings.
If the partitions are mounted on a mounting rod, first the clamps are installed on the glass, then the rod is inserted and only after that the rod is attached to the wall. If partitions are installed using a roller mechanism, the carriage with rollers is first attached, and then the glass panels are installed.
Before installing shower screens, you must carefully study the manufacturer's instructions. This will help prevent errors during the installation process.
Installing a shower tank, water supply and heating
You should approach the choice of tank very carefully. It is worth considering some recommendations from professionals:
- Metal containers heat up faster in the sun. Plastic containers are distinguished by their durability due to their resistance to corrosive processes. They are also lightweight, which will reduce the load on the frame.
- The water container should be painted a dark color, which will speed up heating. This is achieved through better heat absorption.
Most often the shower tank is dark in color Source eem.ru.net
- The tank must have a sealed design to prevent dust and dirt from entering the water.
- Before installation, holes are made in the tank for the tap and water supply.
Today in the store you can find ready-made designs that include a watering can, pipe, tap and fittings. A sensor for monitoring the water level and its temperature would also be useful. The container is installed and secured to the prepared frame.
To supply water to the shower, water pipes are used:
- A trench is dug at the site where the pipeline is laid. Its depth should be greater than the freezing level of the soil. This will protect the system from frost.
- The pipeline is being assembled. Particular attention is paid to the pipe joints. They must be sealed and reliable. A water tap is installed at the end of the pipeline, with the help of which water will be supplied to the pipeline.
- The pipeline is insulated with mineral wool and laid in a trench. If it is necessary to supply electricity, the electric cable is buried in the same trench with the pipe. This will make your work easier.
At the final stage, the pipeline is connected to the water source and to the storage tank. In the latter case, polyethylene pipes or a garden hose can be used.
Water tanks can be installed separately - in this case, the volume of heated water can be increased Source fishing-caravan.ru
If necessary, the garden shower can have independent water heating. A common option is to install heating elements. Heating is also carried out using a boiler or a low-power gas boiler. When installing these heating elements, it is worth considering safety requirements.
Solar panels are also used for heating. This is a glass box with a coil installed inside. With its help, a greenhouse effect is created, which leads to heating of water.
What calculations will be needed
When purchasing a shower, take into account not only its size, but also the dimensions of the room in which it will be installed. Pay attention not only to the height of the cabin walls, but also to the dimensions of the tray and ceiling panel.
You can purchase standard models that are designed to fit in most bathrooms, or you can order them in the dimensions you require.
According to the length of the walls, hydroboxes come in the following classes:
- small-sized - wall length 70-100 cm;
- medium - 80-130 cm;
- full-size - 170 cm or more.
When purchasing a shower, take into account the dimensions of the room.
The total height of low cabins is between 170-190 cm, high - 210-140 cm, such models are not suitable for every room.
Organization of water drainage in a summer shower
There are several ways to arrange a drain in a summer shower. Thus, water can be discharged into a filtration well or into a filtration field. In the latter option, channels are installed between the beds. This will allow you to irrigate the area at the same time without any special costs.
Diversions are carried out in open and closed ways. In the first option, ditches are made at a slight slope from the collection site. This option is often used on moisture-resistant soils. The closed method involves laying pipes in the ground.
We need to decide where the used water will flow, given that it will be soapy. Source pol-exp.com
Examples of modern user-friendly designs
Thanks to the unique design features of shower partitions, their use in modern interior designs is limited only by the designer’s imagination. The main thing when installing them is that the room is conveniently divided into separate functional areas, without loss of usable space.
To give the room a stylish and original appearance, you should pay attention to non-standard shower partitions with a rounded shape. It is also worth considering the type of door opening. They can be: hinged or sliding. In any case, well-chosen glass partitions will create a special atmosphere of comfort in the bathroom , allowing you to shower comfortably, separating it from the rest of the room.
To emphasize the individuality of the bathroom, you should carefully consider the choice of glass, which is processed using various technological methods:
| Glass processing method | Result |
| Sandblasting | Allows you to create matte surfaces with various patterns. |
| Application of water-repellent coating | Helps prevent moisture from accumulating on the surface and the glass does not fog up. |
| Full color printing | Allows you to create high-quality and clear drawings, ranging from simple ornaments to black and white photographs. |
| Stained glass | They are distinguished by a real work of art, and consist of multi-colored pieces of glass. |
| Engraving | Allows you to create unusual patterns applied with special equipment. |
To summarize, it is worth noting that installing shower partitions with your own hands is quite easy. The main thing is to familiarize yourself in advance with the sequence of all the work being carried out, prepare the necessary materials and tools, and stock up on free time. As a result, the bathroom will become more stylish, practical and easy to use and maintain.
Summing up communications
The routing of pipes in a bathroom with a shower depends on where the drain is located in the pan. If the vertical riser is located far from the planned installation location of the shower, it is necessary to lay the sewer pipes in advance at a slope of 2-3°. The flexible siphon must be selected with a small margin of length to facilitate connection with the drain pipe. It is necessary to take care of the cleanliness of the sewer drain before starting work and close the sewer pipe with a plug.
Water supply
Pipes are brought to the pallet through holes in the wall or, when laid on a surface, hidden behind plasterboard sheathing. It is important to pressure test the pipes before tiling your shower. To do this, install a mixer or a plug with an air bleeder on the thread. The test is carried out within 20 minutes after the air is released. During this event, it is important to check all areas with joints and threads for leaks and repair if found.
Electricity supply
If you plan to have lighting in the shower, you need to drill channels for the cable in advance. If communications are hidden inside a plasterboard box, then the wiring is attached to plastic clips. To illuminate shower rooms, use a copper flexible cable with double insulation and a minimum cross-section of 2.5 square meters. The connection is made directly from the panel with the installation of a residual current device. For installation in the shower, only moisture-proof recessed luminaires with a minimum degree of protection of 65 IP are used.
Installation of a ceramic tray or cast stone bottom
Heavy structures that are installed without legs, without stands, directly on the floor, include trays made of cast stone or ceramics. Their design has a niche for a siphon. If the structure is monolithic, then there is only a drain hole. A flexible drainage system is used for the monolith. Sometimes it is placed on a pedestal:
- The floor is covered with waterproofing.
- A cement screed is laid on top.
- Taking into account the height of the drainage system, bricks are laid around the perimeter of the pallet.
- A siphon is connected to the pan, its outlet pipe is connected to the outlet pipe.
- Installation of the bottom is carried out with an already installed drain system. Therefore, it is installed on cement so that the outlet pipe and siphon each fall into their own niche, created specifically for them.
The front side of the pedestal is covered with ceramic tiles or mosaics. All joints of the shower enclosure are treated with sealant.
Corner models
Despite the simplicity of its design, the corner is selected according to the material from which the pallet and cabin are made, and according to its shape. Selected according to installation angle. You can purchase the two components of the model (tray and cabin) not as a set, but separately. The assortment of construction stores allows you to make a choice so that they are later combined into a single structure. The main thing is to choose them exactly in size.
Pallets are made from various materials:
- of steel;
- made of cast iron;
- made of ceramics;
- from marble;
- made of acrylic.
Acrylic models remain in demand. They are not heavy, if treated with care they will last for many years, and are affordable to the average buyer. Manufacturers produce them in the shape of a rectangle, square, semicircle.
Accurate measurements of the installation location will allow you to choose a cabin so that the doors do not hit the walls of the room when you open them. The doors are made of glass with frosted or transparent texture. There are colored booths. All this makes the shower enclosure a decoration of the bathroom. The fittings of the design add style to the design of the corner.
