The best drills for a hammer drill: types and their features

A concrete hammer drill is a metal tool that can be successfully used for drilling holes in structures also made of brick, natural and artificial stone. SDS-plus drills, like cartridges in this category, are designed for installation on medium and light series rotary hammers. It is drills for concrete hammer drills that are most often used by home craftsmen to perform various repair and construction work. Well, our review will tell you which equipment is best to purchase so that it will serve for a long time without complaints about the quality, speed and accuracy of drilling.

Photo: https://www.prostanki.com/

PROJAHN 8303110 Drill SDS PLUS – the best in its segment

Designed to create holes in concrete, including reinforced concrete. Equipped with a fixation system in the SDS+ rotary hammer for quick change of equipment. Penetration into a durable concrete layer is facilitated by a composite carbide tip. Accurate soldering centering will ensure that the hole is made with the required tolerances for deviation from the specified dimensions.

Pros:

• Strength.
• Plunge speed.

Minuses:

• Overcharge.

Rating of the best quality rotary hammers

PRORAB 2401 SDS-plus drill – optimal for small holes

The cutting tool works in tandem with a hammer drill, creating holes with a diameter of 3 mm in brick and concrete structures. The combination of a spiral groove for removing sludge and reliable fixation of the carbide tip will solve household problems such as hanging pictures, towel hooks or kitchen utensils.

Pros:

• Small soldering diameter.
• Optimal operating speed.

Minuses:

• Insufficient strength - they bend when the pressure on the hammer is inadvertently increased.

What features of rotary hammers should you pay attention to when choosing?

In order to understand which hammer drill is better, you need to study the technical specifications.

Power type

The use of cordless tools is important in places where there is no electricity - at heights, on the street. Using networked models requires an outlet nearby. They are more powerful.

Engine layout

Devices with a vertical engine are powerful, withstand intense loads and cool better. This is a professional equipment for repair and construction. And with a horizontal arrangement, the design of the tool is similar to a standard drill.

The hammer drill can work with both wood and metal

Impact mechanism type

There are 2 types of impact mechanism:

• Pneumatic . It is worth choosing such a device for professional work.
• Electromechanical . Since the system is less durable and is not used for long periods of heavy loads, it is suitable for light household work.

Spindle speed and impact frequency

The rotation speed depends on the spindle speed. The parameter is inversely proportional to power. Rotation is necessary to remove cuttings from the hole that are formed during drilling.

When a hammer drill is used for drilling holes, it is better to choose a model up to 2000 rpm. For drilling, a device up to 1000 rpm is sufficient.

Impact frequency is an important indicator. And the higher it is, the faster the drilling will be completed.

Additional functions

Additional functions include reverse, electronic speed control, brush wear indication, overload protection, anti-vibration system, power button lock, dust collector, overheating protection and drilling depth limitation.

Concrete drill SDS-plus S4 (4x50/110 mm) Kraton – best price

A cutting tool equipped with a tip made of a composite cermet alloy easily overcomes resistance in a layer of concrete and brick. This is facilitated by a durable carbon steel body, made of one diameter along the entire length.

Pros:

• Affordable price, best for the standard size.
• Durable rod.

Minuses:

• Lack of protective coating - the body begins to rust in an environment with high humidity

Drill SDS+ EXTREME 2 (4x50/110 mm) DeWALT DT 9502 – quality

The tool is designed for work on reinforced concrete structures and brickwork. Perfectly drills holes in artificial and natural stone. Productivity is enhanced by special sharpening and carbide tipped geometry. The strength of the coupling will be ensured by solid copper surfacing, applied under pressure at high temperature.

Pros:

• High quality workmanship.
• Excellent drilling speed.

Minuses:

• The price, however, is justified by the technical properties of the tool.

How much do impact construction tools weigh?

One cannot fail to note such an important distinguishing factor as the weight category of the instruments. The rotor is not only small in size, but also light in weight. This is due to the use of a low-power and high-speed electric motor capable of reaching speeds of up to 4000 rpm.

Rotary hammers are equipped with more powerful electric motors that develop low speed, but at the same time have high torque, which directly affects their weight category. Drilling devices are divided into three types by weight:

1. Lightweight - up to 4 kg
2. Medium - up to 6 kg
3. Heavy - from 6 kg. These are barrel perforators, which, in addition to working mechanisms, have a special compartment for pouring liquid oil

The most powerful impact drill weighs no more than 4 kg. Light weight simplifies the operation of the tool, but not in all cases. When it is necessary to drill through concrete, the weight of the tool plays a big role. If, when drilling, the hammer needs to be pressed firmly against the surface of the material being processed, then the drill hammer does not need such actions.

Drill SDS plus-5X (5×50/110mm) Bosch 2608833771 – long life

The drill is used in conjunction with a hammer drill equipped with an SDS+ fixation system. The carbide tip contains a centering tip, which ensures reliable and accurate drilling in concrete. The four-sided tip geometry helps overcome dense environments. This form of composite brazing prevents jamming in the reinforcing steel.

Pros:

• Excellent drilling speed.
• Tool longevity.
• Workmanship.

Minuses:

• Not noted by buyers.

Rotary hammer Caliber Master EP-1300/30M – vertical layout

A rotary hammer with the function of a classic vertical drill of a professional class. Equipped with a powerful motor that provides effective impact force.

A built-in safety clutch prevents the tool from turning. Electronic reverse is provided. The vibration-damping handle ensures operator comfort.

Pros:

• Power, vibration damping, “two in one”.
• Rich equipment, ergonomics.
• Case, drill chuck included.

Minuses:

• Heavy, gets hot, lacks power.

Concrete drill (5x50/110 mm) SPEC-0210002 – optimal for domestic purposes

Used for drilling holes with a diameter of 5 mm in structures made of dense and hard concrete and ceramic bricks. Optimal sharpening of the tungsten carbide tip increases the accuracy of work and extends the life of the cutting tool.

Pros:

• Price in its segment.
• Good drilling speed for a household drill.
• Thermal hardening of the entire tool.

Minuses:

• Quickly dulls when in contact with metal embedded parts and fittings.

Question answer

Does the country of manufacture of a rotary hammer matter?

Today, no is more often than yes. But here you need to look at the company. For example, a Makita assembled in China is not at all like an unidentified noname.

Can a drill be used as a screwdriver?

With an adapter jaw chuck - yes, but it is better to purchase a separate tool.

Why is reverse needed?

In case the drill gets stuck but needs to be removed from the hole.

If you use the above criteria, the search field for a rotary hammer will be significantly reduced, and the tool will serve for a long time and without breakdowns.

Drill SDS+ pro (6x50/110 mm) ATAKA 8080250 – an excellent offer from a domestic manufacturer

Works on reinforced concrete, brick and natural stone. Russian products are equipped with high-strength pobedit soldering. The drill is resistant to axial and lateral loads and resists bending and lateral displacement well. A two-groove spiral, which effectively removes drilling products, helps reduce the degree of heating.

Pros:

• Affordable price.
• Made in Russia.
• Sufficiently long service life.

Minuses:

• Buyers did not note any shortcomings

Drill bit for rotary hammers (6x50/110 mm) P4Plus Metabo 626204000 – versatility

The drill belongs to the universal class - in addition to concrete, brick and rocks, the tool goes through a certain thickness of metal. This is facilitated by the main and side cutting edges. Compliance with technological rules during assembly made it possible to increase the accuracy of passage and reduce friction. The drilling flour is effectively removed by the special geometry of the spiral groove.

Pros:

• Excellent workmanship.
• Withstands contact with metal parts.
• Strengthening the rod.

Minuses:

• Perhaps the price. But it is justified by technical capabilities and long-term operation.

Basic operating rules

If you have already decided which hammer drill to choose for the job, here are the basic recommendations for working with the equipment:

• It is necessary to take a stable position when working, avoiding cramped spaces and hastily formed floorings. If operations at height are to be performed, you need to make sure that the stepladder or scaffolding is reliable.
• The device must be held with both hands - by the main and additional handles. High power and torque in case of jamming of the drill can lead to kickback. In such a situation, the user loses control of the device. The safety clutch is activated only when the tool is held with both hands by the two handles.
• You need to work with high-quality and undamaged equipment - this will eliminate the risk of jamming and improve efficiency.
• It is important to use protective equipment against concrete fragments, concrete dust, and noise. The technician should always have glasses, gloves, a respirator and headphones with him.
• Take care of a stable power source for connecting equipment - a working outlet or an industrial extension cord.

No matter how attractive this or that model may seem to you, you should not make hasty decisions. Take into account the parameters of the power tool, which indicate its working potential, and try not to overpay for a good hammer drill.

Concrete drill SDS-plus S4 (8x50/110 mm) Kraton - cheap

Successfully drills concrete, brick, rocks. The rod is made of the same diameter along the entire length, which increases the overall strength. Indispensable for drilling holes for kitchen and clothing wall cabinets, for hanging heavy mirrors and shelves.

Pros:

• Lowest price in its segment.
• Withstands the stress of home renovations.

Minuses:

• It begins to rust when the ambient humidity is high.

Concrete drill (8x50/110 mm; SDS+) SPEC-0210004 – good service life

The equipment is designed and used to work with power tools equipped with the SDS+ fixation system. The destruction of concrete, brick structures or mining materials is carried out by a tip made of a composite tungsten carbide alloy. Compliance with assembly technology made it possible to increase the service life of the equipment.

Pros:

• Additional heat treatment.
• Longevity at home.

Minuses:

• Poorly represented on the market.

Is it possible to drill a hole in concrete with a screwdriver?

If there are no special tools at hand, then a screwdriver is used to drill concrete. However, attempts lead to the fact that it is not possible to achieve a positive result. This is due to the fact that the screwdriver does not have an impact drilling function, so it is contraindicated to use it for working with concrete. A screwdriver is designed to work with self-tapping screws, but it can also drill through wood. Just keep in mind that screwdrivers are based on a low-power electric motor. If the motor experiences maximum load, it may simply burn out.

If you are going to drill through thick wood with a screwdriver with a 10 mm drill bit, then immediately abandon this idea. You should especially not use the tool for drilling concrete or mixing the mixture. It will not be possible to drill concrete with a screwdriver, since this device does not have an impact mode. It is also not recommended to mix bulk mixtures with a mixer attachment in the chuck. The engine will experience high loads (and it has very little torque), and therefore can burn out very quickly.

This is interesting!
Each tool has its own purpose, so before using one or another device, you should read the instructions.

Drill SDS-plus (10 mm, 50/110 mm) Enkor 10905 – availability

Ideal for drilling holes in concrete, brick and stone during household work. The rod is equipped with spiral grooves for removing sludge. The surface of the rod is subjected to additional compaction.

Pros:

• Inexpensive.
• Widely represented on the market.

Minuses:

• Weak when encountering hidden metal structures.

Rating of the TOP 15 best hammer drills

Our rating will help you choose the best hammer drill from a trusted company. They are distinguished by good build quality, reliability and long service life.

Makita HR2470, 780 W

Rotary hammer with 3 operating modes , dust protection, carbon brushes, torque limiter. It can make 32mm holes in wood and 13mm in steel. There is a depth limiter, electronic speed control, an additional handle, rubber pads and a release clutch. The equipment can be fixed in 40 positions.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 1100 rpm;

maximum impact frequency – 4500 beats/min;

weight – 2.9 kg.

Prices in online stores

BOSCH GBH 240, 790 W788888

The Bosch brand hammer drill easily copes with wood, brick, metal and concrete. There are 3 modes: impact drilling, drilling and chiselling. A device with a maximum drilling mode diameter of 68 mm. Additional features: protective clutch, powerful reverse, electrical speed control . The package includes a case, power button protection, drilling depth limiter and auxiliary handle.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 930 rpm;

maximum impact frequency – 4200 beats/min;

weight – 2.8 kg.

Prices in online stores

ELITECH P0724REM Promo, 750 W

The device is ideal for drilling, chiselling and drilling holes of various diameters in different materials. The SDS-Plus chuck allows for quick tool changeovers . The tool is equipped with an additional adjustable handle, which guarantees full control. For convenience during long-term operation, the start key has a fixed start position. The device is lightweight and compact.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 1700 rpm;

maximum impact frequency – 6100 beats/min;

weight – 2.7 kg.

Prices in online stores

Makita HR2470X15, 780 W

A durable, reliable and durable tool from a Japanese brand can work both as a regular drill and as a jackhammer. A special cartridge ensures quick replacement of the nozzle. Internal parts are protected from dust. When there is high-speed torque in the hammer drill, the limiter . The package includes a set of drills, which allows you to start working right away.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 1100 rpm;

maximum impact frequency – 4500 beats/min;

weight – 2.7 kg.

Prices in online stores

BOSCH GBH 2-26 DFR case, 800 W

Network hammer for performing work in production and at home. It works great with hard materials - metal, concrete, brick and natural stones. There is a special switch on the body that smoothly regulates the number of revolutions. As a result, it turns out to make a hole of the desired size with an accuracy of a millimeter. The kit includes a quick-release chuck, a side handle, a depth gauge and a case.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 900 rpm;

maximum impact frequency – 4000 beats/min;

weight – 2.9 kg.

Prices in online stores

Bort BHD-800N-K, 800 W

The device supports operation in simple drilling, hammer drilling and chiselling modes. It is equipped with a set of drills and drill bits with various tips and SDS-Plus shanks. They guarantee a secure fit. The gearbox is equipped with a reverse system, which makes it possible to easily remove equipment stuck in brick or concrete. The hammer drill is equipped with a drilling depth limiter and an additional handle.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 1050 rpm;

maximum impact frequency – 4850 beats/min;

weight – 2.85 kg.

Prices in online stores

BOSCH GBH 180-LI 4.0 Ah x1 case

This model from a German company is included in the 2021 rating of rotary hammers. It is equipped with 1 speed and performs the functions of a screwdriver, chiselling and drilling. The battery is removable, and the type of charging is pulsed. The body has ergonomic devices: power button protection, depth limiter and auxiliary handle. Contents: case, 2 batteries and quick charger.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 1800 rpm;

maximum impact frequency – 5100 beats/min;

weight – 2.3 kg.

Prices in online stores

DeWALT D25133K, 800 W

A reliable, ergonomic and high-quality tool has a well- thought-out design and good characteristics. It is convenient, light and easy to use. The powerful device can operate at high speed. It has 3 modes - impact with drilling, impact and drilling. It is characterized by ergonomics, high efficiency, light weight, low noise and vibration levels.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 1500 rpm;

maximum impact frequency – 5500 beats/min;

weight – 3 kg.

Prices in online stores

Bort BHD-1000-TURBO, 800 W

The tool has an extended package, which includes an ergonomic case , concrete drills, an additional branded handle, and a depth gauge. It is equipped with 3 operating modes, so it is as functional as possible. There is a long network cable with a plug. The engine power is impressive.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 900 rpm;

maximum impact frequency – 4800 beats/min;

weight – 3.85 kg.

Prices in online stores

CALIBER EP-800, 800 W

The device is equipped with an SDS-plus cartridge, which allows you to quickly and easily replace attachments. There is a comfortable handle that provides a confident position in the hand. The hammer drill is equipped with a carrying/storage case. Working speed is adjustable. This model is considered a budget analogue of Makita and Bosch devices.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 1300 rpm;

maximum impact frequency – 5500 beats/min;

weight – 3.7 kg.

Prices in online stores

VORTEX P-1000K, 1000 W

Tool for working with metal, wood, stone, concrete and brick. The maximum diameter of holes in metal is 13 mm, concrete – 30 mm and wood – 40 mm. There is electronic speed control, a switch, a limit stop, a safety clutch and ventilation holes. The ergonomic handle has a rubber coating, which reduces vibration.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 1100 rpm;

maximum impact frequency – 4900 beats/min;

weight – 3.4 kg.

Prices in online stores

DeWALT D25143K, 900 W

The three-mode lightweight unit features a quick-release 3-jaw chuck, electronic adjustment and a safety clutch. You can drill holes up to 30 mm in wood and 13 mm in metal. There is an improved sealing system that provides maximum protection against dust. It is convenient for them to work due to rubberized pads, an additional handle and light weight.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 1450 rpm;

maximum impact frequency – 5350 beats/min;

weight – 3.1 kg.

Prices in online stores

Bort BHD-1200, 1100 W

The hammer drill operates in 3 modes: drilling + impact, impact and drilling. Thanks to its high rotation speed and impact frequency, it can be used both at home and in the professional sphere. The weight of the tool makes it possible to chisel reinforced structures, drill wood, metal and concrete. The engine is installed vertically. There are additional attachments, such as drills. Comes with a case.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 800 rpm;

maximum impact frequency – 4000 beats/min;

weight – 4.2 kg.

Prices in online stores

Kolner KRH 950C, 950 W

A powerful tool with 3 operating modes and a convenient mode switch. High performance is ensured by the vertical arrangement of the motor , copper stator and rotor windings. There is direct access to the brush assembly and a spare set of carbon brushes. There is a safety clutch, a metal depth gauge, a removable handle, 3 drills, a container of lubricant, a lance, a chisel, a boot, a lubricant key and a case.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 800 rpm;

maximum impact frequency – 4000 beats/min;

weight – 3.8 kg.

Prices in online stores

Metabo KHE 2660 Quick case kit2, 850 W

Combined model with chiseling, drilling and drilling functions. The "Quick" system ensures quick chuck changes for drill type for metal or wood processing. At the bottom there is an electronic Vario speed switch. The durable motor is protected against dust. The spindle lock ensures smooth switching of modes and reliable fastening of the established settings.

cartridge type – SDS-Plus;

number of speeds – 1;

maximum speed – 1100 rpm;

maximum impact frequency – 4300 beats/min;

weight – 3.1 kg.

Prices in online stores

Drill SDS plus-5X, 10x50x110 mm Bosch 2608833797 – a combination of quality and performance

The excellent quality of cutting tools equipped with carbide brazing will allow you to drill out concrete and brick walls and ceilings. Speed ​​of passage and accuracy are ensured by a tip with four-way directionality. Drilling dust is discharged along spiral grooves along the main axis of the drill.

Pros:

• Excellent quality from a German brand.
• High performance.