Water supply and sewerage in a private house - design and installation

The best price for the design of engineering systems!

Owning a house outside the city is not only an excellent opportunity to fully relax from the hustle and bustle of the metropolis, but also a good way to demonstrate your respectability. In both cases, country real estate must provide the owner and his guests with all the benefits of civilization, among which perhaps the most important place is occupied by water supply and sewerage systems. Firstly, it is convenient from the point of view of hygiene and food preparation. Secondly, it allows you to ensure proper sanitary condition of the house and surrounding area. Thirdly, a small but tangible plus for the fire safety of the home.

You say: what could be simpler than installing a water supply system by installing taps, washbasins and other plumbing fixtures in the right places? And you will be completely wrong. There are a lot of nuances, without taking into account which it will be, if not impossible, then certainly difficult to use water supply and sewerage. Especially if both the water supply and wastewater disposal are supposed to be autonomous. Behind every properly functioning and year-round engineering network there is a strict calculation and professional installation. can provide you with both. Our design bureau is ready to create a water supply and sewerage project for a cottage or country house. The price depends on the area and number of floors of the building, as well as on the degree of its provision with sanitary equipment.

Cost of engineering systems design. Price per m2

The complexity of a water supply project depends on whether there is the possibility of a centralized water supply, or whether it is necessary to drill a water well with the installation of pumping equipment and, possibly, a filtration unit. The latter depends on the quality of the supplied water and is determined by the results of the examination.

“Cottage Expert” is engaged in the design and construction of houses, so any project created by our specialists can, at the request of the client, be translated into reality by the company’s construction division. All work performed is guaranteed.

Water supply and sewerage systems in private construction

Water drainage and sewerage in a private house can be done in two ways:

• by connecting to centralized systems;
• by building autonomous systems.

The preferred option is the first, since in this case the external water supply and sewerage system will consist of a pipeline laid from the house to the connection point. To implement this project, you need to have permission from the relevant organizations to connect to centralized systems (read: “Sewage project in a private house - what needs to be taken into account”). In addition, technical conditions for carrying out work will be required. But not all suburban settlements have central water supply networks and sewage disposal lines. Therefore, many homeowners are forced to build LOS (local treatment facilities) on their property and install equipment for water intake from wells or wells.

Based on the method of transporting liquid, wastewater disposal systems can be either free-flow or pressure. The first of them allow water to move through the pipes by gravity, for which the pipeline is installed at an optimal angle of inclination. In cases where it is not possible to mount the network at the required angle, the design of external water supply and sewerage networks involves the installation of pumps for pumping liquid.

Depending on the location where the equipment will be located, water supply and sewer networks can be internal (inside the building) or external (outside the house).

Well for water supply

The well is considered one of the most accessible and common sources of water for private homes. This method is preferred if the water is at a depth of 5-15 meters. Depth and productivity are the main criteria when constructing a well. The water in the source must be sufficient to meet the needs. If you have a well, you can provide your home with liquid in the amount of 500 liters per day.

The well should not be located close to above-ground buildings (at least 5 meters). And also to sources of possible pollution: sewers, toilets, landfills (at least 50 meters).

The procedure for performing actions when constructing a well:

• Determining the location of the well using ionomer frames.
• Selection of building materials: reinforced concrete rings, brick, stone, processed logs.
• Digging a well manually or using special equipment.
• Interior and exterior finishing works.

One of the advantages of supplying water to a private home using a well is that in the absence of electricity, water can be extracted from it manually using a rope and a bucket. In addition, the price for digging a well is much less than for installing a well, especially an artesian one.

A few more advantages of wells:

• Service life - about half a century;
• There is no need to collect a package of official papers to install a well on your country property;
• All work on cleaning and disinfecting the well is convenient to carry out, thanks to the large diameter of the rings;
• Availability of clean water, free of rust and chlorine.

Features of arrangement of intra-house networks

Internal water supply and sewerage networks are pipelines and equipment installed inside the house. The end point of the in-house sewer line is the place where the pipe exits the building. In turn, for the water supply system, the place where the pipeline enters the house becomes the starting point of the network. The internal plumbing system consists of:

• introducing a pipe into the house;
• starting water metering and dispensing installation;
• source of hot water (this can be a boiler or boiler);
• double pipeline for separate supply of cold and hot water;
• supplies to water intake points;
• water consumers are a kitchen sink, washbasins, toilet, bowl, washing machine and dishwasher.

In-house sewer networks include:

• pipes coming from water intake points;
• sewer riser to which pipes are connected;
• the place where the sewer line is removed from the house.

Design of sewer and water supply networks in the house

Designing water supply and sewerage systems during the construction or modernization of a private household is a complex and responsible process, so this work should be entrusted to professionals. When it is necessary to design a water supply and sewerage system at a summer cottage using simple diagrams, then you can draw up the project yourself. But when building a house with a complex layout for permanent residence, it is still better not to take risks.

When designing internal water supply and sewerage systems in a private house, the location of water intake points should be taken into account. The simplest option is when the bathroom and kitchen are located next to each other. In this case, you can use the simplest scheme with drainage into a common riser. It is much more difficult to design a house with several floors, each of which has a bathroom.

It is most difficult to develop a project if the water intake points are located in rooms in different parts of the household. In this case, it is necessary to design a complex system, since the installation of water supply and sewerage will require the installation of several risers and septic tanks. Before you start drawing up a project, you need to do the preparatory work:

1. First of all, determine the source from which water will flow into the house. If there is no central water supply in the locality, you need to choose one of the options: deep well, well, springs, etc.
2. Geological research is carried out to draw up an engineering-topographic plan of the site in order to determine the type of soil in the area and the depth of groundwater. Therefore, sewage systems with high groundwater levels will be designed according to a completely different scheme.
3. Determine how much water needs to be supplied to the house and removed from it during the day. This parameter is directly related to the choice of equipment to purchase.
4. A decision is made regarding the type of treatment plant that will be installed on the site. In this case, the distance between the water supply and sewerage is taken into account in accordance with sanitary standards. Most home owners prefer installing factory-made septic tanks. But in some cases, for example, when the groundwater level is high, installing a septic tank may not be possible. In this case, a VOC is installed or a storage tank is installed.

Based on the collected information, appropriate calculations are made, equipment is selected and a design for the future water supply and sewerage system is developed.

Installation of internal networks

Construction of the water supply and sewer system begins after the walls and roof of the building are erected. At the same time, maintain the distance from the sewer to the water supply. Basic rules for installing an internal network:

1. The water pipe is inserted into the house no closer than one and a half meters from the sewer main, as well as from the gas pipeline.
2. A water metering unit is installed at the entry point behind the outer wall. It can also be made with a bypass line, providing increased water consumption in the event of, for example, a fire or without it.
3. Before the water meter, you need to install a departmental valve that shuts off the water, and then a house valve.
4. The diameter of the water supply pipes depends on the number of water intake points.
5. When installing internal water supply and sewerage in a building, pipelines are usually laid in the basement.
6. When there is insufficient water pressure at the inlet, it is necessary to plan the installation of three pumps: two of them will provide water supply in case of minimum or maximum consumption levels, and the third will be a backup.
7. When laying internal pipelines, you need to remember the need to observe the slope of the pipes - its size depends on the diameter of the products specified in the design documentation.

Why you can trust us with design

We employ only experienced, qualified employees. We have extensive design experience and are improving our skills, thanks to which we can successfully apply modern design methods when performing work, use the latest technical solutions and create functional, reliable and cost-effective communications.

If you are just thinking about the need to design engineering systems, then you should know that design is the first stage of installing engineering systems at any facility. It is very difficult to create a functional water supply system without preliminary design, so it is better to foresee all the subtleties and nuances before installation begins. From us you can also order an electrical project, a sewerage system project, a heating project, a ventilation project and an air conditioning system project for your facility.

You can pre-calculate the cost of the project using the automatic service calculator.

Installation of external networks

Outside the home, installation of external networks is carried out based on the following rules:

1. Pipes are laid at a depth exceeding the freezing depth of the soil.
2. If the intersection of water supply and sewerage pipes is designed, the water supply pipeline is located 40 centimeters above the sewer line. When using steel pipes, steel casings are installed at their intersection.
3. Pipelines must intersect at right angles.
4. When water and sewer pipes are laid in parallel, a distance of at least one and a half meters must be maintained between the walls of pipes with a diameter of less than 200 millimeters.

From all of the above, we can conclude that water supply and sewerage in a private household are a rather complex system (this can be seen in the photo) and their arrangement requires a well-designed project. But they will work effectively provided that all the requirements and rules of technical operation prescribed in SNiP are met.

Materials

What materials do trading companies suggest for installing water supply and sewerage systems?

Here is a list of the most popular solutions:

It’s interesting: the range of large manufacturers has long included silent plastic sewerage, which differs from the usual one in a compacted layer with a mineral filler.

Silent sewage system produced by Rehau