How to reset a program on a washing machine, for example Indesit? It often happens that before washing, dirty dark jeans end up in the drum along with white clothes, or a wallet, car keys with an alarm, a phone - in general, everything that cannot be wetted was left in the pocket. According to the law of meanness, these things are discovered after the car is started: the keys and coins jingle, and the white pants are simply clearly visible.
Such a situation would lead a reasonable person into confusion. So that in the future the owner does not panic and pull the wire out of the socket, he should consider a number of recommendations on how to ergonomically stop the washing process. Fortunately, modern SMAs allow you to do this without any difficulties, you don’t have to rack your brains, the main thing is to follow the instructions. First things first.
- Resetting the program
- Why is it necessary to reset the program correctly?
- Actions with a frozen machine
- Catalog of washing machines with reviews
Resetting the program
Despite the fact that there are now a great many models of washing machines, they all have similar controls. A good manufacturer strives to make “communication” with its product clear and accessible. Before we look at the approach to machines of various brands, we will consider two universal ways to stop washing.
LG panel
First option
If one button is responsible for both “Start” and “Stop”, press it to stop the machine. Wait for the door to unlock; it usually occurs within a few seconds. If there is water in the drum, it needs to be drained: through a filter or manually (such models still remain). When you have loaded the drum properly, start a new wash.
Second option
Press the same button for a few seconds (5-10 is enough). The further scenario is the same as above: the water will drain and the door can be opened. If your machine does not have an automatic water drain, place the desired container under the drain valve and slowly unscrew it.
How to reset the error message
If the washing machine generates an error, everyone rushes to contact the technician, but he is unlikely to tell you the secret of his work. You can fix the error yourself using the following algorithm:
- Turn the toggle switch strictly “south” (6 hours).
- Hold down the spin speed selection button while simultaneously turning the toggle switch to “southwest” (7 o’clock).
- Release the button - 3 eights will light up on the display.
- Turn the toggle switch to “southeast” (5 o’clock).
- Turn off the device by turning the toggle switch clockwise.
Why is it necessary to reset the program correctly?
Of course, there are some owners who, if something happens, simply unplug the power cord from the outlet. They explain this by the fact that their washing machine is expensive and modern, and therefore is able to “remember” all the program options that were present before the accident.
Such devices are indeed sold, but a prudent owner will never do this: in the event of a sudden shutdown, there is a risk of damaging the electronic board of the washing machine. What can we say about models with a computerized circuit. They certainly do not tolerate such an extreme approach.
Further recommendations apply to models released in our time. When describing malfunctions of machines of past decades, additional information will be given.
Reset to SMA Indesit
Owners of Indesit washing machines are often confused by the appearance of the Start/Reset button on the control panel. As a rule, it is not signed, but instead of the usual triangle and two sticks there is a diamond with one vertical line in the middle. Original. Before starting washing, the user must set the toggle switches to the required mode and rotation speed.
Indesit panel
In case of an emergency stop, there is a certain sequence of actions:
- hold down “Start/Reset” (the button with a diamond and a stick) for a few seconds;
- the wash is interrupted, open the drum and reload it.
Expert opinion
I work in the household appliance repair industry. Extensive experience in restoring washing machines and dishwashers.
Ask a Question
It should be taken into account that on older Indesit models, before pressing the diamond, you need to move the handles to their original position. If after resetting all the panel lights turn green and go out, the machine is working properly. Otherwise, such a signal will not occur, which indicates a breakdown of the device.
Reset to Hotpoint-Ariston
As in the case of “Indesit”, I slightly modified the icon of the “ON/OFF” button. This is not a diamond with a line, not a triangle with sticks, but a circle, the top of which is crossed by a vertical line.
This icon can be found on a number of other devices - from a computer monitor to a TV set-top box. Popularly it is called the Power button.
Panel "Ariston"
So, to reset the wash on Hotpoint-Ariston machines, you should hold down Power for 3 seconds. The program needs this much time for it to understand that the click did not happen by accident.
If you press it once, the machine will not respond. After pressing Power for 3 seconds, the washing cycle will be canceled and the settings will be reset.
Reset on Bosch washing machines
When operating Bosch washing machines of the latest models (2015-19), reloading laundry, changing modes, and turning on/off the spin cycle follow the same principle:
- Remove the display lock, if there is one.
- Press Start/Pause once.
Do you store laundry in the washing machine?Oh yes! No.
- If you need to load other things, or remove unnecessary ones, wait until YES appears on the indicator. Only then will it be possible to open the drum.
- If you need to change the options, press the button that is needed (temperature, drain, rinse, etc.).
- After the additional loading or mode change manipulations have been completed, press “Start/Pause” again. The machine will continue washing.
For an SMA of this brand, it is permissible to turn off the power from the outlet, but only if the malfunction is not described in the operating instructions.
Bosch panel
Reset on Samsung
There is also a classic “Start/Pause” button - a triangle and two lines. To reset or switch the washing mode, press this button, move the round knob to another program, and press “Start/Pause” again. The machine will accept the new settings.
A number of models include a special function in which you can pause the wash and add detergent through an additional lid on the drum door or remove items that were put in by mistake. Very comfortably.
Samsung panel
Reset on LG washing machines
On cars of this brand, all the rules described above apply. When using LG, it is worth noting the subtlety that will allow you to stop and reset the washing mode, without making any special intellectual effort or, simply put, “for the lazy.”
While working, just press “Start/Pause” and wait a little. Then the program will automatically reset all washing options and interrupt the cycle.
Malfunctions requiring repair
When carrying out any work, you must first unplug the machine from the outlet.
Blockage in the tube or air chamber of the pressure switch
The sensor needs to be cleaned. To do this, you need to remove the pressure switch from the machine, disconnect the air tube from the fitting and check both the sensor and the chamber. The design of the pressure switch practically eliminates clogging, but the tube sometimes gets clogged. Rinse it with running water.
The cause of such clogging may simply be dust.
Open circuit in the water level sensor circuit
Check the connecting wires; external signs of this damage will be poor insulation and a broken wire. If connection is possible, solder and insulate; if this is not possible, replace the entire cable.
The reason for this malfunction is machine vibration. To avoid this and other damage associated with vibration, it is necessary to install the machine correctly, perhaps use silicone pads under the legs, follow the loading standards of the machine and make sure that the laundry does not bunch up.
The pressure switch (water level sensor) is faulty
Before checking the sensor itself, pay attention to how the air tube is attached to it. If the connection is loose and loose, there may be an air leak and the pressure generated is insufficient for normal operation of the device.
To check the pressure switch, attach a small tube of a suitable diameter to its fitting and blow lightly. You should hear clicks. If they are not there, the sensor is faulty.
The final stage of testing the device is a multimeter. When measuring the resistance at the relay contacts when it is activated, the value should change.
Setting up and repairing a pressure switch is a job that requires qualifications and experience. Usually they just buy a new one.
In order to buy a sensor, you need to know the brand and model of the washing machine, since pressure switches for all machines are made completely different.
The electronic controller (control board) is faulty
In order to test the control board, it must be removed from the machine. External signs of a malfunction may include burnt board elements, soot, and the smell of scorched insulation. The cause of the breakdown is the failure of any element: resistors, transformer, relay and others. Repairing the control board is also quite complicated. Often it is simply replaced with a new one.
Fill valve broken
To test the fill valve, it must be disconnected and removed from the machine. If there are cracks or deformation on it, the valve needs to be replaced; it cannot be repaired. If the valve appears to be intact, then perhaps it just needs to be cleaned, and for this to be completely disassembled. The cause of the blockage may be scale. When disassembling, you also need to carefully inspect all parts for damage.
If you follow all the recommendations in the instructions for use, your washing machine will serve for many years without breakdowns. Modern washing machines are complex mechanisms; if you are not confident in your qualifications, then it is better to entrust repairs to professionals.
See also:
- 10 best washing machines under 25,000 rubles according to customer reviews
- 13 best washing machines from 40,000 to 50,000 rubles according to customer reviews
- 14 most reliable washing machines
- 15 best washing machines
- 15 best washing machines from 30,000 to 40,000 rubles according to customer reviews
Actions with a frozen machine
If the machine is frozen and no interaction is possible with it, first of all, you should get the instructions out of the closet. As a rule, it says how to reset the program safely.
Many manufacturers clearly explain that you can pull the plug from the socket, but only if the reason for the freeze is not described in the manual. So, unplug the power cord, wait 10-15 minutes and start the machine again. It should reboot. If all is well, you can continue washing as normal.
Expert opinion
I work in the household appliance repair industry. Extensive experience in restoring washing machines and dishwashers.
Ask a Question
If the device still does not respond, you must contact service. Remember: before repairing the washing machine, you should turn off the water supply tap and disconnect the device from the power supply.
Video
What does the OE error mean on an LG washing machine?
The OE error lights up on the screen of an LG washing machine approximately in the middle of the wash - when the machine should go into rinse mode. The code means that for some reason the water from the drum cannot be drained.
Sometimes the OE error is described as “03”, reading the code as numeric with the number “3” facing the other way.
The OE error does not appear immediately - first the machine tries several times to start the desired process and fix the problem on its own. But if 5-6 attempts do not bring results, then the device stops and the corresponding code appears on the screen.
Preventing the problem from recurring
To prevent OE errors from appearing in the future, you must follow these guidelines:
- use the machine according to the instructions;
- avoid interruptions in the network;
- periodically clean the drain hose and filters;
- check pockets for small items;
- load items with tightly sewn buttons into the machine - they need to be fastened before washing.
