Garden grass shredder: a rational solution for your garden

Every year, garbage accumulates on the site, which has to be removed or burned. But there is a way to utilize branches, tops and grass for good. With the help of a garden shredder, plant waste can be processed into a valuable mass, which can then be used to fertilize or fill a compost pit.

In order not to get confused in the variety of models, the cost of which varies significantly, and whose technical characteristics make even an experienced gardener think, we have compiled a rating of garden shredders with the best reviews. We’ve also made a selection of useful tips that will help you decide on the optimal model for your site.

What kind of device, scope of purpose

As soon as the first rays of the spring sun warm the earth, gardeners go out to fight excess vegetation on their site, which interferes with the development of useful crops.
But weeding, thinning, and cleaning dry leaves and grass ends up cluttering the area with garbage, which not only spoils the appearance of the landscape design, but can also cause numerous plant diseases.

What to do in such a situation? Leaving garbage is unacceptable, and burning it is a risky business due to the introduction of a ban on burning grass within city limits according to the new Russian legislation.

It is unprofitable to remove garbage at your own expense, and it is a pity to lose raw materials for such valuable compost. And here a unit such as a chopper becomes simply irreplaceable, which will simultaneously solve all problematic issues.

A garden grass shredder is a new word in agricultural technology that makes it much easier to work on a plot of land and forget about the headache of getting rid of unnecessary grass. Representing a container with a number of blades and a powerful motor, this unit is capable of grinding any herb in a matter of seconds.

Weeds, thorns, dead wood, leaves and other debris are processed into fine compost, which no longer takes up much space, but is stored for further use as fertilizer for garden beds.

If you do not need to fertilize the site, it will not be difficult to pack excess compost into bags and remove it from your territory, which was simply impossible with those piles of plant debris that were weeds before processing.

If wood chips are processed, they are often used as fuel. Wood chips, processed through a grinder, are formed into pellets and become an excellent type of heating fuel, replacing firewood and coal. If you wish, you can form pellets at home.

Thus, there are many advantages from purchasing a shredder, which is why it has gained worldwide popularity and is becoming increasingly in demand in our country, not only in large farms, but also in private landholdings.

Top 10 rating according to KP

Editor's Choice

CALIBER ESI-2400N 2.4 kW (from 7989 rubles)

CALIBER ESI-2400N.
Photo: CALIBR An excellent purchase for owners of suburban areas at a not-so-exorbitant price. This garden shredder is used to quickly work with organic waste. Withered leaves, branches, fallen flowers, plant stems - this and much more can be loaded into it. The resulting mass can be used as fertilizer. Manufacturers claim that the model has reliable and sharp knives and good speed. However, take into account the diameter of the branches that the device can handle - they should be no more than 40 mm.

Characteristics

Advantages and disadvantages

Price, size
Works noisy

show more

BOSCH AXT 25 D 2.5 kW (from 24 thousand rubles)

BOSCH AXT 25 D. Photo: BOSCH
The next reliable garden assistant in our rating. It is noticeably different from the first one due to its high price, but perhaps someone is looking in this range. The Bosch AXT 25D garden shredder is used to process trimmed branches, old branches, shrubs and grass into useful materials for the garden - compost base and mulch. Here you will find a powerful motor with a throughput capacity of up to 175 kg per hour. For safety reasons, it only turns on when the grass catcher is attached.

Characteristics

Advantages and disadvantages

Quiet, breaks thick branches well

Doesn't pick up thin and fresh fibrous branches well

show more

MTD Rover 464 Q (24A-464Q333) 7.5 HP (from 93 thousand rubles)

MTD Rover 464 Q. Photo: MTD Rover
Expensive, but high-quality garden shredder. It features an impressive loading hopper (46x46 cm). Three ways to load debris - a metal tray for thick branches, small branches can be loaded from above, small debris can be collected with a rake and raked into a hopper lowered to the ground - make the model universal. Among other things, it is possible to install a device for transportation. There is also a high grinding ratio of 10:1.

Characteristics

Advantages and disadvantages

Fast grinding, excellent quality

Price

show more

What other garden shredders are worth paying attention to?

Viking GE 150 2.5 kW (from 28.6 thousand rubles)

Viking GE 150. Photo: Viking
This handsome guy, according to user reviews, does his job very well. With a powerful motor and a special blade mechanism, the GE 150 processes thick branches and turns them into fine chips, thereby reducing the volume. The short, slanted funnel and patented cloverleaf opening allow for easy, hassle-free loading. The model runs on electricity. Energy costs are standard.

Characteristics

Advantages and disadvantages

Reliable engine, power

High voltage

show more

Makita UD2500 2.5 kW (from 15 thousand rubles)

Makita UD2500.
Photo: Makita Moving on. The Makita UD2500 garden shredder should take its rightful place in the list of the best shredders 2022. Here is a modern, high-power device, characterized by increased performance and ease of use. Its modern design and thoughtful construction make it an important assistant in a wide range of tasks: shredding autumn leaves, cut branches, small plant debris, etc.

Characteristics

Advantages and disadvantages

High productivity, automatic with reverse

Inconvenient collection container

show more

BISON ZIE-40-2500 2.5 kW (from 11 thousand rubles)

BISON ZIE-40-2500.
Photo: BISON Decent price, formidable name - an excellent device for a summer resident! Used for processing various plant waste. You can turn them into a single mass for disposal or subsequent composting. Manufacturers claim good power. There is also a high cutting speed and high throughput. The delivery set includes a pusher. This will allow waste to be directed to the cutting system without the risk of injury. The garden shredder is also equipped with wheels, which make subsequent movement easier.

Characteristics

Advantages and disadvantages

Container for collecting crushed material, double-sided knives

Noisy

show more

Tazz K32 7 HP (from 77.5 thousand rubles)

Tazz K32.
Photo: Tazz A powerful car that runs on a gasoline engine. Thanks to the use of an internal combustion engine, the device can be used absolutely everywhere, including in parks, squares, forest parks, not to mention dachas. The model is very popular among municipal employees. Manufacturers claim that the shredder has a low-noise and economical motor. The construction here is predominantly metal, which ensures strength and resistance to mechanical damage. The device is well suited for shredding branches, bushes and other street debris.

Characteristics

Advantages and disadvantages

Quickly grinds garden waste, durability

The trash bag gets clogged quickly

show more

Hammer GS2500 2.5 kW (from 8999 rubles)

Hammer GS2500.
Photo: Hammer A classic, relatively inexpensive electric option. The Hammer Flex garden shredder is designed to shred tree branches, shrubs and wood waste from private households into a compostable state. According to user reviews, the machine grinds both dry and wet branches well. Among the advantages are also a beautiful, harmonious appearance and bright coloring.

Characteristics

Advantages and disadvantages

Convenient wheels for movement, good chopping

There is no fastening on the body for the pusher

show more

STIGA BIO SILENT 2500 2.5 kW (from 14 thousand rubles)

STIGA BIO SILENT 2500. Photo: STIGA
A reliable and quiet machine for keeping your garden tidy. This garden shredder has an 8-tooth cutting drum that can cut branches up to 40mm in diameter. The grinding functions can be adjusted. Recycled material can be easily recycled or reused, for example, for mulching flower beds. Due to its size, the model is easy to transport.

Characteristics

Advantages and disadvantages

Does not change power speed under load, quiet for its power

Inconvenient latch location

show more

AL-KO Easy Crush MH 2800 2.8 kW (from 16 thousand rubles)

AL-KO Easy Crush MH 2800. Photo: AL-KO
The final product in our ranking of the best garden shredders. The manufacturer's description is reassuring. The knife chopper, equipped with a powerful cutting mechanism, has a stable body with XL wheels. The large, integrated grass catcher made of ABS plastic is highly stable and ideal for transporting compost. Thanks to the integrated normally open contact, it guarantees maximum safety. The price of the car is average - there are higher and lower prices.

Characteristics

Advantages and disadvantages

Well designed, good plastic

The ground mass is clogged at the outlet

show more

Device

At the moment, there is a wide variation in the choice of shredder models, but despite this, their design principle is similar, the difference lies only in the size of the device and optional features.

A standard shredder has the following structure:

• Metal body. An important condition for a shredder is its reliability and durability, and therefore heavy-duty metals are used for its manufacture. Polymers can also be used to produce the body of the unit. Often the body is mounted on a frame equipped with wheels. This is done to make it easier to move the device around the land plot.
• The heart of a shredder is its motor. This can be an internal combustion engine or an electric motor.
• The grinding process is carried out through a cutting mechanism powered by a drive.

• To make loading grass and leaves a simple matter, the unit is equipped with a loading bowl or, as it is also called, a loading hopper. As a rule, the bowl has the shape of a funnel, which makes it much easier to load plant debris into the shredder.
• The device also has a receiving hopper where the processed plant mixture is supplied. You can attach the bag to the receiving hopper, so you don’t have to waste time on arranging the mixture, or you can directly throw the mixture away during processing in the areas of your garden you need. There are models that allow you to adjust the direction and height of spreading the crushed mixture, which is also very convenient and saves time on gardening work.

Professional gasoline shredders

In the case of professional activities related to cleaning large plots of land from various garbage, you will need specialized equipment. This group includes stand-alone shredders that do not need to be connected to the network. This is expensive equipment that has high power and productivity, and is equipped with large-volume bins for loading garbage and unloading mulch. Such shredders have protection systems against overheating and excessive loads, which significantly extends the durability of their operation during active use.

PATRIOT PT SB 76 (732107060)

Professional gasoline shredder for leaves, branches, grass. Engine power is 6.5 hp, the volume of the fuel combustion chamber is 196 cubic cm. The fuel tank holds up to 3.6 liters of gasoline. The engine itself is 4-stroke. The engine is started manually. The power is sufficient to grind branches with a diameter of up to 7.6 cm. The working part of the shredder is a knife, equipped with 16 blades. The maximum rotation speed is 3600 rpm. The body of the instrument is made of metal. There are wheels for transportation and a wide funnel for loading.

Advantages:

• high build quality;
• power, performance;
• easily copes with cutting branches of large diameter;
• the engine starts the first time.

Flaws:

• loud noise during operation;
• high price;
• large mass;
• It is extremely problematic to restart if the equipment stalls while grinding large debris.

MTD Rover 464 Q (24A-464Q333)

One of the best gasoline shredders for chopping branches, leaves, and grass. The engine power reaches 7.5 hp, the volume of the fuel combustion chamber is 250 cubic cm. The motor is started manually. The fuel tank capacity reaches 3.8 liters. The engine of the tool is 4-stroke. Equipped with a spacious hopper with a capacity of 90 liters. The working part of the shredder is a knife. The power is enough to grind branches with a diameter of up to 7.5 cm. There are convenient wheels for transportation and a wide funnel for loading debris. The equipment body is made of high-strength metal.

Advantages:

• high performance;
• easily cuts branches of the stated diameter;
• there is built-in protection against too much load and engine overheating;
• hopper for loading large volumes of waste;
• bag for collecting mulch included;
• high-strength body;
• 12 sharp blades on the working part for grinding waste;
• good build quality;
• The engine most often starts the first time.

The only serious drawback that many buyers highlight is the high cost. However, it is justified by the power, performance, and high build quality of the gasoline shredder.

Types of engines, pros and cons

Shredders come complete with either an internal combustion engine or an electric motor. Both options have their own operating nuances, advantages and disadvantages. Let's look at this issue.

Electric motor

More often used for oversized units for home use, whose power does not exceed 2.6 kW. For a dacha or a compact garden not exceeding 6-7 acres in area, this is a completely acceptable option that will cope with the task assigned to it in eliminating plant waste.

The undeniable advantage of such devices is their lightness: it will not be difficult to move the unit around the site and power it from the mains. In addition, electrical devices are easy to operate and do not require special skills. Maintenance is also reduced to a minimum. But in the conditions of large farms or greenhouses, a shredder with an electric drive will no longer be functional.

In addition, the device is dependent on the power supply, which becomes somewhat problematic when working in large areas - you will need an extension cord, and this will limit the user’s freedom of action. Along with this, there are weather restrictions when working with an electric shredder due to the danger of electric shock: the unit cannot be operated in rain or high humidity.

Chopper with petrol engine

This is the most rational choice for “field” conditions, when there is no possibility of power supply from the mains, and the amount of work significantly exceeds the standard six hundred square meters of the average dacha.
Devices equipped with a gasoline power unit attract attention with their autonomy and unpretentiousness.

Most often, a two-stroke motor is installed on a device of this type, which is distinguished by its reliability, durability and increased power.

So processing tons of grass from the field will no longer be the limit of fantasy, but a very real task that your shredder will be able to do.

But the disadvantages include the fact that when working with a gasoline shredder, you must have basic skills in its operation. In addition, you will have to regularly check the condition of air and gasoline filters, spark plugs and carry out technical work. Although, if you wish, you can learn all this quickly enough.

Diesel shredders

As a rule, diesel engines come complete with professional-level equipment. The advantage of this type of unit is its high operating power: the chopper can operate without failures or shutdowns for many hours.

In addition, a positive point is the ability of diesel units to operate at low speeds.

But, like any unit, the diesel option also has its negative sides: firstly, it is a higher price compared to the two options listed above. Secondly, diesel models are large, and therefore are extremely rarely used in households.

It is extremely difficult to transport a diesel model on your own, so this is an excellent option for large farms, but not for private use.

If you still want to purchase a diesel model because of its high performance characteristics, you can turn your attention to equipping it with a mobile unit equipped with a high-power three-phase electric motor. In this case, it will be possible to move the unit around the site, which means its use will become more rational in the conditions of private land ownership.

How to choose a garden shredder

The design of garden shredders is simple. The cutting mechanism is enclosed in a plastic or metal housing. The upper part of the housing serves as a receiving hopper, the lower part is a discharge hopper, from where the processed mass comes out. A receiving box may be provided for its collection. For stability, the unit is equipped with a metal frame, and for ease of movement - with wheels.

There are three types of cutting mechanism:

• knife;
• screw;
• milling.

The milling garden shredder is considered to perform better than other types of models. In fact, the milling mechanism, as a rule, is found only in high-power, professional models, while household and semi-professional models are usually equipped with knives or a screw mechanism, similar in design to a meat grinder. If cutters are included in the design of a household model, it will cost an order of magnitude more than a knife model.

Advice . It is a mistake to consider some shredders better and others worse, focusing only on the type of blade mechanism. The main thing is to choose a model of the power that meets your requirements. And the following classification will help determine this.

Domestic

It will be compact and relatively light. Thanks to the frame on wheels, it is convenient to move it around the site. The cutting mechanism, as a rule, is a knife one, and this is not bad: you can sharpen the knives as they become dull yourself, while the cutters will only have to be changed.

Household models are designed for chopping thin branches and thick tops - for example, sunflower or corn stalks. But they don’t cope with grass very confidently: if you load only grass into the bunker, it will wrap around the knives, and the soil from the roots will dull them.

Fact . It is worth adding grass to the garbage mass only in small quantities, understanding that it is unlikely to be properly chopped. For this purpose it is better to use a lawn mower or trimmer. The latter, equipped with a knife and fishing line, instantly chops a bunch of grass into dust.

Semi-professional

You should choose this model for shredding wood waste. The power of semi-professional units is higher than that of household ones, and therefore they theoretically cope well with branches with a diameter of up to 40 mm. Why theoretically? Because the manufacturer, indicating this parameter in the technical specifications, focuses on only soft varieties of wood - for example, aspen, bird cherry, linden.

If you chop branches of any trees without taking into account softness, you should reduce the permissible diameter by at least 10 mm. By making such an amendment, it will be possible to extend the life of the unit by several years.

Fact . In some models, the receiving hopper is equipped with a nozzle with a hole through which branches must be fed. This is not only a tribute to the user’s safety, but also an opportunity to control the diameter of plant materials and prevent excess load on the cutting mechanism.

Professional

Such models are not bought either for the dacha or for the garden. They are intended for gardening farms and companies involved in landscaping and maintenance of park areas. Professional shredders are very powerful. Most of them can easily handle not only branches with a diameter of up to 60 mm and old twigs, but are also able to process stumps broken into four to six pieces into dust.

But they have two drawbacks. Firstly, they are expensive: it is unlikely that an ordinary gardener will have the desire to spend 70-120 thousand rubles on a plant waste shredder. And secondly, they are bulky, a unit weighing 80-100 kg, roaring like a beast, will not look very harmonious on the garden plot.

Choosing the right one

The most important thing you need to pay attention to when purchasing a unit is the power supply and power. Decide whether you need an easier-to-use, but mains-dependent, electric shredder or a heavier, but field-operating gasoline shredder.

Also examine the grinding system of the device. It can be milling or disk. The first option is more expensive, but has a wider scope of application and is characterized by high reliability and durability. The second one is cheaper, but is not able to cope with a large volume of work, and if branches get into it, the device will not be able to cope with them and may even fail.

Garden Shredder Power Type

You need to pay attention to this parameter first of all, because a lot depends on the type of power supply of the device: its power, capabilities, comfort of use and the need for maintenance.

Shredders are divided into two types based on the type of power supply.

Electric garden shredder

The optimal choice for owners of summer cottages. The productivity of such devices is quite enough to process ordinary plant waste: vegetable peelings, last year’s grass, trimmings of branches and grape vines.

Their power usually does not exceed 2.5 kW, and the noise level is much lower than their gasoline counterparts. To operate, they only need a connection to the electrical network, but it is important that the wiring is in good technical condition. They do not smoke and do not require regular maintenance. However, their capabilities, as a rule, are limited: when trying to chop a large branch, the device may fail.

Gasoline garden shredder

It will be the right choice if the site is not connected to power supply or there is a need to purchase a powerful, “omnivorous” unit. The motors of gasoline shredders can have low power, close to electric ones. And they can provide exceptional performance, which will be sufficient for chopping thick branches and twigs.

In operation, such a unit is more demanding: it requires regular maintenance and requires monitoring the oil level. But by refilling the tank on time and not forgetting to carry out maintenance, you can safely move the shredder around the site without being “tied” to the outlet. And work with it for many years: gasoline engines usually last longer than electric ones.

What else is worth paying attention to

When choosing a shredder, you should pay attention to the following points:

• How convenient is the receiving hopper? Different models offer their own receiver design: it can be located at an angle or vertically. Premium models allow you to adjust the position of the receiver. Choose the option that will be most convenient for you for your work.

• The kit should include a pusher, which greatly facilitates the work of loading plant debris.

The lack of a pusher in the model can lead to serious injury because pushing grass into the shredder yourself is dangerous.

• If you are looking for a unit that will make your work as easy as possible, then pay attention to models that are equipped with guide ribs. At the same time, some models have a cross-shaped or slot-shaped receiver - such technical features improve the operation of the unit and make it easier to load large volumes of grass, as well as branchy branches.

• Mid- and premium-class options are usually equipped with a function for differentiating the output raw materials. This becomes very convenient if, for example, you need one fraction of raw materials for compost, and another for the formation of pellets for stove heating.

• Removable bags and a translucent hopper for waste grass can be considered as useful additions.

In addition, many modern grinders are equipped with a mechanical system for automatically feeding waste raw materials into the hopper. In this case, the work is done extremely simply, you just need to lower the plant debris into the funnel, and the device will do the rest for you.

A useful feature is also the ability to adjust the speed of rotation of the knives (or line), this becomes especially important when you need to adjust the type of raw material being processed.

Which shredder to choose for the garden

Plant waste shredders (also known as chippers or shredders) are primarily distinguished by the type of power drive, distinguishing three main types:

1. Electrical;

2. Gasoline;

3. Powered by power take-off shaft.

They may also differ in the shape of the cutting element. Disc shredders are relatively inexpensive, but they shred only fresh plant waste with high quality. They cope best with tops, weeds, leaves and needles, stalks of corn and sunflowers.

Milling shredders are distinguished by increased power, and the cutting shaft-cutter pair themselves pull the branches inward, and besides, they do not require sharpening of knives.

Here you can finely chop almost any organic matter:

• dry and wet wood (up to pieces of timber or boards);
• branches of bushes, fruit and ornamental trees;
• grapevine.

Based on the power of the power unit, all such equipment is usually divided into three classes: amateur, middle class, and industrial.

Amateur models are characterized by small weight and dimensions, relatively low power, and good maneuverability. As a rule, amateur models use electric motors and a disk cutting system.

Mid-class chippers are equipped with engines with a power of up to 2.5 kW. They can be equipped with a disk or milling grinding mechanism, a self-retracting mechanism, and wheels for moving around the site.

Professional shredders are used in large parks and garden farms. Gasoline engines or electric motors connected to a three-phase network are used as a power drive.

Recommendations: 12 Best Brush Trimmers

12 best pruners

16 best lawn mowers

Question answer

Which shredder is better, electric or gasoline?

It all depends on how you are going to use it. If for country work, on a small plot of no more than six to seven acres, then it would be better to choose an electric one. If the unit is needed for a farm or large areas of land, then a gasoline unit will be more convenient.

Can branches be processed in a grass shredder?

It is forbidden. It is necessary to operate the shredder based on its technical capabilities.

Is a herb grinder used to process grain?

Yes, many models provide for chopping, in addition to grass, hay, dead wood and grain. But this needs to be clarified in the technical characteristics of the unit you are interested in.

What is the difference between milling and disk shredders?

The milling machine is capable of handling a large volume of work and can grind branches. Disc is intended exclusively for grass and only to the extent specified in the technical specifications.

Is it possible to adjust the fractions of the processed mixture in the shredder?

Yes, many modern models provide for setting fractions, which is very convenient if you need to sort ground grass or grain for different purposes.

Purpose and design of equipment

A shredder is a technique designed for recycling garden waste - branches, leaves, grass, tops.

Using this device, plant waste is crushed into fractions of various sizes. The resulting wood chips can later be used for mulching the soil, fertilizing, sprinkling paths, or as fuel for lighting a fire or barbecue. A garden shredder facilitates the process of cleaning the site and also solves the problem of waste disposal.

The device, which is also called a chipper or shredder, is a vertical structure with a motor, a shredding mechanism and a feed opening. The output of the resulting raw materials is carried out through the lower space - into a receiving tank, a suspended bag or an installed box.

Shredders – what are they?

The devices vary depending on the type of material they can process and are divided into three types:

• for grass, leaves and other soft plant debris - as a rule, they are low-power, low-cost, lightweight units. In order to save money, they are made by manufacturers from cheap materials, and therefore an attempt to grind something larger with it can lead to breakdown;
• for wood waste - this technique has a more durable and stable frame, as well as a grinding principle. Suitable for crushing branches of various diameters. But they are not capable of processing large log buildings, since they are household, not industrial equipment;
• universal - devices, being a lightweight version of professional equipment, are designed for garden waste of both soft and hard structure.

Choosing a chopper - motor type and cutting system

The engine can be electric or gasoline. Models with electric drive are lighter, more compact and mobile, they are easy to move around the garden. A gasoline engine requires larger dimensions of the device, but at the same time has greater performance compared to electric devices.

The grinding system can be line, knife, milling, auger and turbine.

Lesochnaya is used for crumbling leaves and grass. Its action is based on a line that cuts soft fibers at high speed, but even the thinnest branch will lead to its breakage.

The knife blade consists of radial knives mounted on a disk. In inexpensive devices, 2 knives are installed, in higher quality ones from 4 to 8. Sometimes, in addition, a pair of oblique knives are attached vertically for preliminary crushing. The mechanism is suitable for branches and withered greenery.

The milling system, which is also often called a milling shaft, refers to a gear with sharpened teeth, convenient because it itself grabs and advances the rods, cutting them into equal parts. The milling complex is capable of detailing even a 7 cm branch, but it is installed only in models with steel frames, which significantly increases the weight.

Turbine systems are most often built into universal models, as they cope with all types of waste. They look like a cone-shaped drum with protruding knife blades, and operate at low speeds but with maximum impact force. The peculiarities of the mechanism are such that leaves and grass must be fed along with branches to avoid the soft mass from wrapping around the drum.

The auger-type mechanism is not capable of grinding leaves and tops, as it quickly clogs, but it copes well with branches up to 5 cm. The operating principle is based on a rotating screw, which grinds the wood into a fibrous pulp interspersed with large pieces.

Additional criteria - power and body material

Conventionally, there are three categories of garden shredders based on engine power: amateur models, semi-professional (middle class) and professional.

Amateur devices are the most primitive; they include equipment with a low-power electric drive (up to 1.5 kW). The crushing system is most often knife-based, as it is the simplest and cheapest, but effective when processing thin twigs. Amateur-grade devices weigh up to 20 kg and are designed for raw materials with a diameter no thicker than 3 cm. Suitable for novice users.

Middle class chippers are an intermediate level - more advanced than amateur models, but less powerful than professional ones. They can run on both electricity and gasoline (2-stroke engine). The maximum motor performance is 2.5 - 3 kW. Total weight from 20 to 50 kg. Designed for wood material up to 5 cm. Weight up to 50 kg.

Professional shredders include large-sized machines with a power of 4-5 kW, capable of crushing branches with a diameter of 7-9 cm. They are distinguished by large feed funnels, a powerful crushing system (most often milling) and automatic feeding of raw materials. The motor can be electric or gasoline. Designed for large volumes of work. Weighing from 100 kg and above.

Depending on the type of material, the body of the device can be plastic or metal. Plastic structures are lighter, metal devices are more difficult to transport as they are heavy. The presence of a wheel base and handles makes it easy to move the device around the site. The wider the wheels, the more stable the unit and the easier it is to move it, especially along row-spacings and loose soil.

The best electric milling shredders

Electric milling models are characterized by ease of operation, impressive weight, and good power and performance indicators. Their only drawback is their dependence on the location of the outlet.

Makita UD 2500 - reliable and durable model

5.0

★★★★★

editorial assessment

100%

buyers recommend this product

See review▶

One of the most popular amateur models among domestic users. The main feature of this chopper can be considered the reliability of the design, which is confirmed by a well-thought-out ventilation system for the power part of the unit. You can move the device around the site using large wheels.

The milling cutting system, together with a powerful collector motor, provides good performance and speed of recycling garden waste.

As an additional bonus, the manufacturer has provided a reverse, a spacious waste container (67 l) and an inspection window.

Advantages:

• Good power;
• Reliable milling grinding system;
• Reverse;
• Excellent build quality.

Flaws:

• Impressive weight (31 kg).

Powerful milling shredder for working in gardens and summer cottages with a large amount of organic waste.

Ryobi RSH 2545B 2.5 kW - the best combination of price and characteristics

4.9

★★★★★

editorial assessment

96%

buyers recommend this product

See review▶

A very productive mid-class model that can easily cope with dry and wet wood with a diameter of up to 45 mm.

A powerful electric motor powered from a household electrical network is used as a power drive. To make it easier to move the unit around the site, the manufacturer has provided transport wheels.

The features of this model are: convenient loading of waste through a funnel and good stability due to the wide base. The shredder is equipped with a removable container for collecting crushed waste with a capacity of 40 liters.

Advantages:

• Automatic feeding;
• Milling grinding mechanism;
• Not bad power;
• Reverse;
• Possibility of adjusting the mechanism taking into account the thickness of the branches.

Flaws:

• Large fraction after grinding;
• The container is made of thin plastic.

This model will find its application in country and garden plots with a large number of bushes and old trees for pruning.

AL-KO LH 2800 Easy Crush – a very productive machine

4.7

★★★★★

editorial assessment

90%

buyers recommend this product

A powerful middle-class model from a well-known German manufacturer allows you to chop wood up to 42 mm thick. A powerful electric motor with protection against overloads and voltage surges is installed as a power drive in the chipper.

This model has good productivity, which is achieved thanks to the innovative design of the milling mechanism.

The shredder is capable of processing up to 230 kg of branches without overheating, and its waste collection tank holds up to 50 liters. The model is equipped with transport wheels, making it easier to move equipment around the site.

Advantages:

• High engine power;
• Good performance;
• Protection of the power part from overloads and voltage surges;
• Milling grinding mechanism;
• Reverse;
• Automatic feeding.

Flaws:

• Not suitable for small branches;
• Large fraction after grinding (4 cm).

The model is perfect for working in small garden plots.

Einhell GC-RS 2845 CB - a reliable unit for domestic use

4.7

★★★★★

editorial assessment

88%

buyers recommend this product

A model from the middle price segment of shredders from a renowned German manufacturer is highly reliable - mainly due to the build quality and materials used in the design.

The engine is equipped with a full set of automation. A strong and massive frame ensures stability on any ground.

The shredder body is made of modern durable and lightweight plastic. At the same time, the unit itself is equipped with an enlarged receiving funnel and a large waste tank of 60 liters.

The design of the cutter has also been carefully thought out: it is a solid steel drum with blades.

Advantages:

• Power;
• Reliability and excellent build quality;
• Reverse;
• Improved design of the grinding mechanism.

Flaws:

• Inconvenient slice thickness adjustment knob;
• Doesn't cope well with thin branches.

This model will be an excellent helper in the country house and small garden plot.

The best knife electric shredders

Electric knife shredders are characterized by relatively low power, productivity and weight. Their main advantages are maneuverability and ease of operation.

Bosch AXT Rapid 2000 – German quality

4.9

★★★★★

editorial assessment

92%

buyers recommend this product

See review▶

AXT Rapid is one of the lightest, most compact and productive shredders in its weight category.

The key to the popularity of this model is the trouble-free operation and high quality of the unit, which is able to dispose of up to 80 kg/h of garden waste.

There is a high-speed electric motor here, the rotation speed of which is controlled electronically. For free movement around the territory, the manufacturer has provided small wheels and a long handle. Well, the complete pusher significantly speeds up the process of working with the unit.

Advantages:

• Reliable and convenient design;
• High-quality assembly;
• Constant engine speed regardless of load;
• Well-thought-out protection of the power unit from overloads;
• High quality grinding system.

Flaws:

• It turns off when the mains voltage drops.

An excellent garden shredder for home use as long as you have a stable power supply.

Stiga Bio master 2200 – grinds everything into dust

4.8

★★★★★

editorial assessment

87%

buyers recommend this product

See review▶

A powerful and reliable shredder from the famous Swedish brand boasts an innovative design of double blades located at an angle.

This solution reduces the likelihood of a branch getting stuck in the cutting mechanism and ensures that the output is very fine chips.

The latter can be used as mulch and for laying in a compost pit. The unit is easy to transport around the site due to the presence of a comfortable handle and pair of wheels, despite the weight of 15 kg.

Advantages:

• Improved blade element design;
• Reverse;
• An elongated funnel with protection for the operator’s hands;
• Shockproof housing;
• Powerful engine;
• Fabric bag for collecting waste.

Flaws:

• Relatively low productivity.

Stiga Bio master 2200 will be a good helper in any summer cottage - small in size and moderately well-groomed.

Patriot PT SE 24 – inexpensive vertical shredder

4.5

★★★★★

editorial assessment

82%

buyers recommend this product

See review▶

The easy-to-use budget model has received a huge number of positive reviews thanks to its powerful engine, which provides the device with solid performance.

Knives rotating at a speed of 4500 rpm are responsible for high-quality shredding of waste.

With a weight of 13 kg, the unit is very convenient to move around the site, since it has a comfortable handle and large wheels.

Advantages:

• Light weight;
• Sophisticated automatic feeding system;
• High engine power;
• Starting with electric starter.

Flaws:

• Heats up during long periods of operation;
• Clogs quickly due to the narrow outlet.

A good shredder for a small cottage at a reasonable price.

Wolf-Garden SDE 2800 EVO – high-power knife shredder

4.5

★★★★★

editorial assessment

80%

buyers recommend this product

See review▶

A powerful electric unit is designed for grinding fresh plant waste, including branches with a diameter of up to 45 mm.

To drive the blade system, a commutator motor is used here, equipped with protection against overheating, overloads and power surges.

Operational safety is ensured by automation with protection against unintentional start-up and an emergency stop system for the power plant.

Advantages:

• Powerful engine;
• Sophisticated automation system;
• Safe operation;
• Fine fraction after grinding waste.

Flaws:

• The knives clog quickly.
• Unreliable wheel fastening.

This model will be useful for owners of large garden plots with fruit trees and shrubs.