A real owner should have order not only on the site, but also in the workshop! Check out these 12 easy ways to store important items in a small space.
As a rule, few of us can boast of a large, spacious garage or utility room, where a walk-behind tractor, a tool cabinet, or even a woodworking machine can easily be stored. There is always a catastrophic lack of space, so you have to resort to little tricks. We offer a few more ideas for your piggy bank.
Useful devices
Without aiming at overly complex homemade machines and devices for the garage, any garage owner can make several very useful things with his own hands from scrap materials.
Carrying with an unbreakable shade
When repairing a car or other work, it is often necessary to have bright lighting aimed at the right place. It cannot be provided by stationary ceiling and wall lamps; you need to carry it with a socket and a lamp, which can easily be broken when moved or awkwardly moved. You can protect it with a lightweight, unbreakable shade made from a plastic canister or bottle with translucent matte walls.
The neck of it is cut off at such a level that the cartridge fits into the hole. A window is cut out in the side wall through which a light bulb is inserted into the socket, and it is directed to the place that needs lighting. At the same time, the side walls of the lamp diffuse the light, and it does not hit the eyes.
Tips for keeping things organized
After completing the installation of shelving and panels, hanging all the tools and appliances, it’s time to think about maintaining this ideal order for a long time.
After all, after a week, a month or more, you still want to enjoy a systematic and neat environment. To adhere to this order and not confuse your devices, we recommend using hint marks .
After hanging it as compactly as possible, you need to stick stickers with the image of the device on their locations
The second way to organize the storage system is to designate it with numbers . It is necessary to mark the instrument itself and the place where it should hang with the same number.
To make it comfortable to work in the garage at any time of the year, you should take care of organizing ventilation and heating.
Step 15: Stencil and Protractor Holder
I have a large and a small protractor. Each of them has the same holes, which allowed us to create a simple holder.
Video description
Another method of making a carrier is shown in the video:
It is important! In such a carrier, you can only use cool LED or energy-saving light bulbs.
For greater convenience, we recommend equipping your homemade garage with a device that allows you to remove the electrical carrying cable from the floor. Due to its large length, it often gets tangled underfoot, interferes with walking, and is easy to damage and receive an electric shock. Especially in cool weather when the cable loses its flexibility.
It is better to hang it from the ceiling on a steel cable stretched along a long wall. For this:
- screw two anchors with a ring-shaped head into the ceiling at opposite ends of the room;
- pull the cable between them, having previously strung several rings on it, which can be made from wire wrapped around the pipe;
- the diameter of the rings must be such that the carrying fork can pass through them;
- pull the cable through all the rings;
- if it is very long, attach a wire hook to the cable, on which the excess length will be hung.
The long cable is located under the ceiling and easily moves in the rings Source stroychik.ru
Crafting table
On the workbench you can perform various manipulations with tools, which are given special attention. It is necessary to take into account the available spaces and, according to them, calculate all the nuances of the project.
The frame is manufactured and fastened by electric welding. The height of the workbench should be about a meter or slightly lower. The parameters are selected depending on the height of the person who will work there every day.
After assembly, the frame is treated with an anti-corrosion primer. The base for the tabletop is made of a thick board 7.5 cm thick. If this is not available, then you can assemble several thin sheets and fasten them together.
The workbench top should be made of thick board Source seattlehelpers.org
See also: Catalog of garage projects presented at the Low-Rise Country exhibition.
For convenience, the workbench can be equipped with pull-out cabinets or shelves. A perforated screen is hung above it to hang various tools that are often used at work.
Tire rack
In the garage you can often see a accumulation of old tires that have not been used for a long time. Also in a separate pile are the wheels that are installed in the winter.
To solve the problem of clutter, you can make a simple shelving unit that is quite simple. To do this, you need to find free space.
The rack looks like a regular cabinet, but is designed to accommodate wheels. Its width must be made in such a way that four tires fit on one shelf.
A tire rack will solve the problem of clutter Source vibiraite.ru
Shelving design
Before installing the racks, it is necessary to correctly calculate the dimensions - they should not interfere with the work area, as well as clutter the entire space and interfere with the passage of the car.
The most suitable option for placing the rack is against the wall. The height depends on the number of things that need to be placed inside. Typically, the lower shelves are suitable for large items such as a jack or fuel cans. You can also put additional tires underneath.
It is convenient to place the shelving structure against the wall Source pinterest.com
In order for the rack to withstand such a load, you need to take care of the strength of the structure. The frame is made of durable boards or metal. To make the structure as strong as possible, vertical and transverse corners should be used on the sides.
After the corners are welded, you can assemble the frame and prepare the beams for priming.
If the frame is made of metal, it must be coated with a special anti-corrosion compound. All boards are also impregnated with special enamel to extend their service life.
Technology for creating a wooden tool rack in the garage with your own hands
Before you create a storage rack with your own hands, you need to decide on the total number of tools that need to be placed.
The tool must be placed on a vertical stand in a safe position.
Creating a project - important points
To make the wall system convenient, draw up a plan-drawing of the future structure on paper, which takes into account all the requirements for the system:
- Calculate the height and width of the rack - it is better to use the entire wall from bottom to top.
- The recommended depth of niches for shelving is up to 65 cm, and the width between the vertical supports of the shelves is up to 1 m.
- Determine the required number of shelves, including how many holder shelves with cuts for tools.
- At the bottom there are spacious floor shelves and racks for tires, wheels and large carpentry tools.
- Mark places for magnetic tapes, hooks, and holders.
- They calculate how many organizers and containers are required, what sizes, and also determine their location.
- Sort tools and all small fasteners and parts for storage.
What you will need
To make a rack, prepare the following tools:
- measuring tape, square, level;
- saw, grinder;
- fasteners;
- hammer, drill.
It is recommended to drill holes in shelves and containers for natural ventilation. This is necessary to protect items from rust.
What materials need to be prepared
All the necessary material to create the rack is prepared according to the drawn up project:
- For the main panel of the holder, you can use a perforated panel.
- If the rack is made of wood, it is recommended to purchase oak or pine lumber without cracks or knots.
- Wooden boards up to 2.5 cm thick will be required for shelves.
- Shelves can be made from regular and laminated plywood.
- The vertical posts of the frame are made of 10x10 cm timber.
- It is recommended to pre-treat wooden boards with anti-mold and mildew agents and paint them.
- To assemble a metal frame, you need a rectangular profile and corners (up to 2 cm).
Manufacturing of components
The procedure for manufacturing the rack and components is as follows:
- Vertical racks made of timber and boards or plywood are cut into shelves according to the given dimensions, and a perforated panel is prepared. Mark out places for shelves.
- To make a metal frame, cut blanks of the required height with a grinder and mark the locations of the shelves. The frame is assembled using fasteners and corners. A primer is applied, then the parts are coated with anti-corrosion paint.
- The shelves are assembled from boards. They are pressed tightly together and nailed together with nails or screws.
- Shelves from boards are assembled by laying elements across the frame, so they can withstand a lot of weight. If the shelves are assembled by laying boards along the frame, then there is a chance that they will sag under the weight of the tools.
- The structure is assembled using self-tapping screws, nails and wood glue.
- The joints of all parts are additionally reinforced with metal corners.
- The entire structure is installed on the wall and secured with metal brackets.
- Shelves with grooves, holders, magnetic tapes, racks, containers and organizers are manufactured separately in the required quantity.
- You may need a small workbench with a vise made from wooden boards. It can be attached to the wall system as a fixed or folding surface on metal or wooden holders.
Log
The tree lives long, weighs little and can be easily processed with almost any tool. I am a supporter of not only convenience and compactness, but also a creative person. It is important to me that everything fits organically into the interior. So, at first, most of the furniture in the workshop was represented by wooden structures and furniture made of stumps, boards, and plywood. While I was heating the potbelly stove, the idea of practical use of logs appeared. I attached them in the corners, made grooves or holes and placed small objects in such seats. The result was “trees” with branches made from saws, drills, bits, pencils and other things.
Source rinscom.com
