Products for washing vacuum cleaners, review and recommendations

Cleaning a room takes a lot of time, and besides, it is a considerable physical burden on a person. Having a vacuum cleaner with an extractor at home greatly simplifies this task. However, the means used must be truly effective, then shampoo for washing vacuum cleaners will help not only remove any dirt, but also humidify the air, neutralize unpleasant odors, and disinfect the room.

From our review you can learn about the most popular liquid detergents for cleaning vacuum cleaners on the market.

Common brands

Some manufacturers produce special products in two forms at once - powder and liquid. The most famous brands are:

Astonish. Manufacturer of cleaning products for vacuum cleaners from England. Detergent compositions have low foaming. Excellent against problems such as mold and mildew. Has the ability to suppress microorganisms that cause allergies.
Whirlpool. This American manufacturer was almost the first to produce washing vacuum cleaners. A little later, they began producing detergents for equipment. Initially they were produced in powder form, and then production was modernized and liquid detergents appeared on the market. Their prices are usually above average. But, despite this, the quality of the wash exceeds expectations. An additional advantage is that the products from this manufacturer are suitable for all brands of vacuum cleaners.
Vanish. The Australian manufacturer has long established itself in the domestic market. The composition includes oxygen, which effectively removes various contaminants. At the same time, it has a pleasant aroma, which makes it an excellent assistant in the fight against the smell of tobacco and dampness.
Topper. Detergents from this German brand are certainly not inferior in quality. A huge advantage is that it can be used not only for flooring. They are also suitable for upholstered furniture, window structures, and carpets. In addition, they have an antistatic and hypoallergenic effect.

Other manufacturing options

In addition to the methods described above, there are several more solutions on how to make a vacuum cleaner yourself.

From the cooler

To clean hard-to-reach surfaces, you need to use a mini vacuum cleaner with a 12-volt power supply. You can use a battery or a power supply as power.

You can make such a device yourself at home. To create it you need the following materials and tools:

computer cooler;
mains cord;
switch button;
lattice;
cloth for dust collector;
soldering iron

So, to create a mini-vacuum cleaner from a cooler, you need to follow the following diagram.

Using a soldering iron, you need to connect the cooler to the power cord and to the power supply.
To make it easier to use the device, you need to make a switch on the cord.
On the side where dust is sucked in, it is necessary to strengthen the grille to prevent foreign objects from getting caught.
You need to make a special bag using dust-proof fabric: to do this, you need to cut a strip, fold it in half and sew it on both sides, you can supplement it with stuffing material for pillows. Then you need to make a side and put on an elastic band.
Then the dust collection bag is attached to the back panel of the cooler. That's it, the mini vacuum cleaner is ready to go!

From a barrel

You can also make a vacuum cleaner using a barrel with a volume of 210 liters. You can use printing ink barrels, as they have sealed lids and locking rings. In addition, you need to use air hoses from an old vacuum cleaner.

Let's look at step-by-step instructions for creating a vacuum cleaner from a barrel.

You need to remove the lid, which has a seal, then make a hole in the center. The filter housing must be fixed on top.
At the bottom of the barrel, plywood should be strengthened and wheeled swivel supports should be installed.
Place the inlet pipe on the left side of the cover; it can bend. The barrel wall is a separator. You can use a car air filter as a filter.
The cover needs to be reinforced with plywood and a fixing plate with a screw must be secured. The plate itself needs to be attached to a plywood circle using two self-tapping screws.
In the center of the barrel you need to secure the inner part of the turbine. Its power is 1.8 kW.
The next stage is making a block: for this you need to take 3 sheets of plywood and glue them together. Then, using a hand router, make attachments for the bucket, engine and lid. There is a cover on top of the block; the on/off switch buttons need to be built into it. The device is ready to use!

The vacuum cleaner will be pneumatic; you can use it to remove sawdust and shavings. Its only drawback is that it is large in size.

From a hair dryer

You can make a mini vacuum cleaner using a simple hairdryer. To do this you will need:

hair dryer;
plastic bottle with cap;
lighter;
pencil;
tongs or nippers.

To make such a device with your own hands, use the following instructions.

First you need to melt the plastic cover. To do this, take a pair of wire cutters and heat the bottom of the lid over the fire of a lighter.
Then you need to insert a pencil and push through the middle of the soft cover. You will get a “pipette”.
Then you should take a utility knife and cut off the tip of the “pipette”.
To make a nozzle, you need to cut off half of the bottle with a neck and smooth its edges using heating. And cut the bottle itself in half.
Next, you need to take the grill from an old hair dryer and wrap its hollow side inside the plastic neck using electrical tape.
After this, you need to connect all the parts and screw on the cap. Then attach the whole thing to the back of the hair dryer where the grill is located.

The hairdryer vacuum cleaner is ready to go and can remove small debris in hard-to-reach parts of the house.

Vacuum

To make a vacuum cleaner, you need the following materials:

plastic box;
working vacuum cleaner - “donor”;
drill with different drill bits;
3M reusable filter;
glue gun;
furniture corners;
bolts.

Making a vacuum cleaner is not particularly difficult.

You need to take a tool box measuring 591x291x311 mm.
To properly strengthen the motor, you need to tighten the power part with bolts.
To prevent the engine from overheating, we make a hole for the bolts, and then using a drill we drill a connector for the cable and the ventilation grille.
Using furniture corners, you need to install a 3M filter efficiently. Thanks to the corners, the filter can be removed and then cleaned or replaced.
In the place where the suction motor and filter are located, you need to glue a seal. It should fit well to the tube and not have any gaps.
The cables must be laid along the walls of the box. They can be attached using a glue gun.

Now the vacuum cleaner can be used for work. Such a vacuum device with a duct fan, made by yourself, can perfectly replace a purchased one and meet all technical indicators. You can refill cartridges in compliance with all regulations, while keeping the device in good condition.

The best powder formulations

These products are not as popular as liquid ones. This is due, first of all, to the poor solubility of small particles. The vacuum cleaner filters become clogged and, as with

As a result, equipment often requires repair. But, nevertheless, many people prefer this type of means. The following brands are in greatest demand:

KARCHER. A powder product that is dissolved in water and poured into the tank. Used for various surfaces. Suitable also for carpets. The manufacturer is constantly improving its products, so these powders dissolve well and do not clog the vacuum cleaner filter.
Zelmer. The composition does not contain dangerous components, which makes it not dangerous for children and allergy sufferers. Also suitable for cleaning not only floor coverings, but also carpets. The downside, as it turns out, is the mandatory flushing of the tank every time after cleaning.

Special or universal?

Special cleaning solutions come in two types:

Sold in large containers. Suitable for processing linoleum and other floor coverings that require special care.

Universal products are suitable for cleaning the entire house: floors (linoleum, laminate, tiles), carpets, furniture, walls. Also suitable for cleaning car interiors.

To choose a special or universal product, you need to make sure whether they meet the following requirements:

concentration;
antistatic;
disinfectants in the composition;
hypoallergenic.

If the product provides all of the above, you can safely take it and use it.

The best liquid products

Manufacturers of vacuum cleaners, as a rule, recommend choosing liquid formulations.
This guarantees effective cleaning and no negative results for the equipment. These are special shampoos that dissolve in water without problems. The main disadvantage is the increased formation of foam, which reduces the quality of the equipment. The following products are in demand:

Thomas. Cleans all types of contaminants. Effective on carpets. When used, they do not harm the color of the coating or texture. Most are hypoallergenic and disinfectant. If you strictly follow the instructions, they are economical compared to others.
Topper. The manufacturer has taken care of the health of its customers and produces shampoos without phosphates and chlorine.
Zelmer. It is also hypoallergenic. Suitable even for surfaces such as decorative stone.

How to wash the floor

Before starting work, dust is removed with a special nozzle or an ordinary broom. Then the device preparation procedure is carried out. If the device is endowed with sufficient power, the surface will become completely dry and clean in 2-3 minutes. It is noteworthy that linoleum, tiles, laminate and parquet can be safely washed.

Laminate

When exposed to moisture, such a coating quickly becomes unusable, but there are varieties that are resistant to water. For example, materials of classes 32 and 33 are coated with a durable layer that repels liquid.

Such products are allowed to be wet cleaned, but products of class 31 and below are allowed to be cleaned only using the dry method. But, despite these aspects, the power of the device should be at a medium or high level.

Laminate flooring is washed using alkali-free products.

The technique works by spraying the product over the floor surface, moisturizing it. If the power is insufficient, the device will not dry the laminate properly. Accordingly, water will get into the grooves between the panels and rotting will begin. High-power devices prevent liquid leakage.

Rules for vacuuming laminate surfaces with washing vacuum cleaners:

dirt from the floor is removed at least 2 times a week;
select products that do not contain alkali;
refuse drugs based on silicone and wax components;
the process of moisture entering the space between the boards is controlled;
joints are treated with mastic annually to ensure sealing;
do not spray the surface with hot steam;
It is prohibited to use hard brushes to remove stubborn dirt.

These recommendations allow you to maintain the original appearance of the product and extend its service life. Additionally, the service life can be increased by using a microfiber cloth after treatment with the device, since the rag will absorb any remaining moisture. This can be done by wrapping a rag around the nozzle.

Note: after using the device, all containers are removed and emptied of dirty water. Then the containers are washed and dried. After each cleaning, the floor should be dried additionally - open the windows for an hour and ventilate the room.

Parquet

Parquet can be treated using the wet method no more than twice every 30 calendar days. In this case, gentle products and an appropriate nozzle are used. As in the case of laminate, parquet cannot be treated with preparations containing alkali, wax, silicone, or use coarse bristles. Steam treatment is prohibited during operation.

Parquet is processed no more than twice a month

Due to the fact that parquet is a “capricious” material, interest naturally arises in how to use a washing vacuum cleaner. The following rules must be followed:

Check the coating for impregnation with water-repellent compounds and protective varnish;
Set the device to maximum power. In this case, if moisture gets on the surface, the device will qualitatively collect all the water, preventing it from entering the cavities;
Treat the surface.

Detergents for people with allergies

If people who are prone to allergies live in your home, then ordinary detergents are not suitable for treating the room. Often, other means are used for this, the composition of which does not provoke an allergic reaction. These include:

Allergy-Free. The special product is so versatile that it is suitable both for washing kitchen utensils and for washing a vacuum cleaner. You can buy it, in most cases, at a pharmacy.
PIP CARPET CLEANER. Reduces to a minimum the number of allergens that can cause irritation, thanks to a special probiotic in the composition.
PIP MULTI. It is a strong concentrate, so it must be added strictly according to the instructions.

Cinnamon

People associate the aroma of cinnamon with comfort, warmth and the New Year. Ground cinnamon can be used to scent rooms using a vacuum cleaner. To do this, you need to sew a small bag of cotton fabric. Sprinkle cinnamon inside and sew the edge. The bag should be as flat and small as possible. It should not interfere with air flow. This flavor can be used for quite a long time.

cinnamon

How can you replace detergent for washing vacuum cleaners?

Resourceful housewives, as it turns out, have long learned to save money by preparing various compositions on their own. At the same time, it must be remembered that any components that cause foam must, of course, be in minimal quantities.

Dissolve two teaspoons of ammonia in warm water. The same solution can be used to treat carpets. To make your house smell nice, add squeezed lemon juice to the tank.

Dilute 15 ml of vinegar in 1 liter of water. This product will also add shine to the floor covering.

To disinfect, add 100 ml of vodka to 1 liter of water.

If you want to add a component that consists of small particles to the tank, do not forget that it must be very thoroughly dissolved. Otherwise, microparticles will clog the filter, which will lead to damage to the vacuum cleaner.

Types of structures

A washing vacuum cleaner used to clean an apartment can have a different design. At the same time, various structural modifications have their advantages and disadvantages.

The most common design solutions are:

both water tanks are located in two tiers, one above the other. With this arrangement, the household appliance has compact dimensions and takes up little space when stored. However, this design is not entirely convenient to use, because in order to pour dirty water from the corresponding tank located in the lower tier, you must first remove the upper one with clean water;
"Matryoshka" arrangement of tanks. In this case, one water container is placed in another. It is also a compact model, and replacing clean water or draining dirty water is faster and without additional effort;
water tanks have the form of removable cassettes inserted into the body of the vacuum cleaner. Equipment of this model takes up little space, and the cassettes are quite easy to remove and put in place;
The device has an additional recovery tank designed to purify dirty water for reuse.

You need to choose the best washing vacuum cleaner of the required design based on your physical capabilities and the availability of free storage space.

Which ones are suitable for allergy sufferers?

For people suffering from respiratory diseases or prone to allergic reactions, manufacturers have developed organic shampoos.

The category of prebiotic products includes:

Organic Carpet Cleaner – during cleaning, deodorizes the air, destroys putrefactive microflora, and neutralizes unpleasant odors.
Ecover – does not contain aggressive components, breaks down contaminants. Sold in pharmacies and online stores.
Pip Carpet Cleaner is economical, removes dirt, suppresses the growth of bacteria and mold, and contains antistatic components.
PIP Multi - contains probiotics that neutralize the effects of allergens.

Even several hours after treatment, specialized products continue to maintain the environmental balance in the room.

When choosing a cleaning product for a vacuum cleaner, you must carefully read the composition and follow the instructions when using it. If the manufacturer's recommendations are followed, high-quality liquids are safe, effective, and economical.

Actions after cleaning is completed

The floor is cleaned and washed, it's time to tidy up the washing vacuum cleaner.

Disconnect the device from the power supply.
Place the cord in the socket provided for it.
Remove the container with dirty water.
Pour out the water and wash the tank.
Rinse nozzles and hoses.
Dry all washed items.
Clean and dry filters and baffles.
Remove any remaining water from the “clean” tank and dry it.

Only after all parts have dried can you assemble the vacuum cleaner and store it. Separately, it is worth mentioning the care of filters. All filter elements must be removed, washed and dried thoroughly. Only after this can the filters be installed in place.

If you collect a vacuum cleaner while the elements are even slightly damp, mold and mildew will appear on them, and this is dangerous for the health of the residents of the house. In addition, you need to regularly replace the filters with new ones, since even with regular and thorough cleaning, they gradually become clogged and become ineffective.

The lifespan of a conventional HEPA filter is usually designed for thirty hours of active use. This time is usually completed in six months or less, depending on the intensity of use of the washing vacuum cleaner. In terms of dust protection, separator-type models without filters are considered more effective.

They are especially recommended where people with severe allergic reactions live. The special design of such devices allows you to retain even the smallest particles of dust.

There is no need to add defoamers to such a vacuum cleaner, and its maintenance is a little easier, since there is no need to clean and replace filters. It should be remembered that a high-quality filterless vacuum cleaner must have, among other documents, an air purification certificate.

Once you've finished cleaning the house, start cleaning the vacuum cleaner.

Unplug the vacuum cleaner from the outlet
Remove the attachments
Wind up the cord
Disassemble all parts (tanks, nozzles, hoses)
Rinse them
Dry
Remove, clean and dry the filter

Only after all the steps have been completed can the vacuum cleaner be reassembled in its original form and left for storage. If you do not follow all cleaning measures, then soon not only a musty smell, but also fungal formations may appear.

Famous brands and their prices

Washing vacuum cleaners are not cheap, but the results pay for themselves.

Before purchasing, many people are lost in choosing a manufacturer, and there are quite a lot of them:

Some write that the vacuum cleaner is very bulky and heavy.

Cleaning with it takes the whole day, and there is no point in buying them for three-room apartments, and the apartment then stinks of mold. They write that cleaning a vacuum cleaner takes a lot of effort and time. It’s easier to buy a mop and a regular vacuum cleaner.

The other half of users praise all the qualities of the vacuum cleaner, and do not find anything difficult in washing containers. They cannot get enough of such a wonderful purchase and how the unit effectively cleans any type of surface.

We suggest you read: How to remove the filter from a Bosch vacuum cleaner

How many people, so many opinions. You need to try and experience everything for yourself. By purchasing a washing vacuum cleaner, you will not only acquire a fashionable technical innovation for your home, but also a faithful assistant.

Source

Do it yourself

You can make such a device yourself; if general cleaning is carried out once a month, then it is perfect.

A homemade washing vacuum cleaner works worse. But if household appliances are too expensive, this budget option is an excellent solution to the problem.

How to make a washing vacuum cleaner with your own hands:

You will need a jar with a plastic lid, a pipe at an angle of 90 degrees and a straight one.
Two holes are cut in the plastic cover. Both pipes are inserted into them.
Then the plastic lid is put on the jar, the corner of the pipe should be on the outside and not inside the jar.
The vacuum cleaner pipe is inserted into the corner. You will also need a second hose with a nozzle. It is inserted into a straight pipe sticking out of the can.
Turn on the vacuum cleaner. Pour water on the carpet and start cleaning. The jar serves as a barrier; water does not enter the unit itself; the waste liquid will be collected in a glass container.

When making such a device, make sure that the lid closes tightly to prevent water from splashing out.

Sometimes the used liquid needs to be poured out and then cleaning continues. Do not allow the jar to fill completely. If the vacuum cleaner sucks up water, it can no longer be saved. The engine will immediately burn out.

To ensure the device lasts longer, it should be used only for its intended purpose.