TOP 11 construction mixers of 2022: rating of mixers for construction mixtures and concrete

Construction mixers Widely used on small and large construction sites.

The unit greatly facilitates the process of mixing various building mixtures to a homogeneous mass with uniform density, and allows you to quickly “refresh” stagnant compositions.

What to look for when choosing a construction mixer, which models are the best today, we will consider in this selection.

Page navigation:

Criteria for choosing a construction mixer

Reference! The construction mixer is structurally similar to a conventional drill, but has a number of technical solutions that increase the service life of its working units.

This is, first of all, a more powerful and durable engine, a maximally reinforced gearbox, durable brushes, lower gearing and high torque.

When choosing a construction mixer, consider the following:

Power consumption. The higher this parameter, the greater the load the mixer can withstand. Devices with a 1–2 kW motor are suitable for mixing viscous materials and preparing heavy mixtures. Including when working with large volumes of compounds and active use of the tool. Devices with a power of up to 1 kW are recommended for use when performing relatively small finishing work.
Torque. The torque value shows how well the motor transmits force to the whisk. This parameter, along with power, is associated with the performance of the unit. The higher it is, the more effective the mixing process will be.
Rotational speed. A construction mixer does not require high engine speeds. Most models operate at 500-700 rpm. Meanwhile, the passport data indicates the maximum idle speed, which can drop under good load.
Number of speeds. Construction mixers have from 1 to 3 speeds depending on the model. Downshifting changes the rpm down and the torque up and vice versa, which is useful for various tasks.
Type of food. Construction mixers are mainly connected to the electrical network. It is convenient if the network cable is long enough - 3-4 meters. Rechargeable models receive energy from a rechargeable battery and are indispensable in sites without power supply.
Useful additions. Adjustable speed allows you to easily configure the tool to work with different materials. The reverse system ensures a change in the direction of rotation of the whisk. Smooth start-up protects the operator from splashing out of the mixed solution and knocking out circuit breakers in the electrical network. Overload protection reduces engine speed when overheating to an acceptable level. Locking the start button allows you to lock the trigger in the pressed position while operating the tool.

Fastening technique

Attachment of attachments is carried out using various methods and directly depends on the model of the tool.

Screw the attachment into the spindle hole, but first remove the chuck.
Insert into a cartridge with a size of 13, 16 mm, clamp the jaws until they stop or use a Morse taper.
Use the quick-release clamp of the FastFix or QuickFix system

The first option is becoming standard among all manufacturers of construction tools of this class - it is not the most convenient option, but the nozzle is easy to unscrew with a wrench even if it is “grabbed” by the fast-thickening mixture. This option is convenient because you can use attachments from other manufacturers on the drill, since they are unified.

The best models in terms of price/quality ratio

Affordable and highly powerful devices do an excellent job of mixing mastics, heavy solutions, and dry mixes.

Rating of the TOP 4 best construction mixers for concrete and dry mixes in terms of price and quality ratio.

ELITECH MS 1600/2ED 1600 W

The high-quality construction mixer ELITECH MC 1600/2ED, equipped with a 1.6 kW engine and two effective nozzles, will ensure rapid mixing of mixtures and finishing materials of various densities.

The unit is equipped with two speed modes, an electronic speed control system, and a quick-release chuck for quickly changing equipment.

The device is mounted in an ergonomic housing with two handles, is characterized by the ability to quickly replace motor brushes and a high torque value (50 Nm).

The product is connected to the network with a 3 meter long cable.

The delivery set includes 2 whisks.

Specifications:

number of speeds - 2;
power type - mains;
idle speed - 790 rpm;
power consumption - 1.6 kW;
functionality - speed controller, start blocking;
device weight - 7.6 kg.

Advantages

high power;
speed adjustment;
body ergonomics;
long power cable.

Flaws

high noise level;
impressive dimensions;
heavy weight.

Interskol KM-60/1000E 1050 W

The Interskol KM-60/1000E construction mixer with a power of 1.05 kW is an affordable professional power tool for preparing mixtures and solutions during construction and repair work.

The model is equipped with a powerful engine, the gearbox housing is made of especially durable aluminum.

The included universal auger makes it possible to effectively mix the vast majority of construction compounds.

The presented mixer is equipped with a speed control system, a two-speed speed unit, and a start button lock.

The ergonomic design and arrangement of the handles ensures no discomfort during operation.

The torque value of the device is 53 Nm.

Specifications:

number of speeds - 2;
power type - mains;
idle speed - 850 rpm;
power consumption - 1.05 kW;
functionality - speed controller, start blocking;
device weight - 4.3 kg.

Advantages

good power;
presence of speed control;
there is a locking power button;
convenient placement in the hands;
rich equipment.

Flaws

decent noise level;
not ideal build quality;
inconvenient location of the speed controller.

BISON MR-1050-1 1050 W

The construction mixer BISON MR-1050-1 with a power of 1050 W will ensure high-quality and fast preparation of all kinds of mixtures, followed by giving them a uniform consistency.

This model is equipped with an M14 cartridge, a long metal nozzle, and has two operating speeds.

The maximum speed of the operating device is 760 units per minute.

The mixer receives energy from a 220 volt power supply.

The design is complemented by an ergonomic double-sided handle with a rubberized coating. The product is equipped with two keys for maintenance and repair.

Specifications:

number of speeds - 2;
power type - mains;
idle speed - 700 rpm;
power consumption - 1.05 kW;
functionality - speed controller, start blocking;
device weight - 4.7 kg.

Advantages

affordable price tag;
high-quality assembly;
sufficient power;
ergonomics of the case.

Flaws

no case included;
the whisk is not of the best quality;
high noise level.

VORTEX SM-1200E 1200 W, orange

Affordable high-quality equipment VORTEX SM-1200E 1.2 kW in a stylish and practical orange casing is the ideal combination of high reliability and ergonomic design.

The model is equipped with a powerful and productive electric motor, a single-speed gearbox, and a button that locks in the on position.

The mixer is equipped with an M14 chuck, compatible with most threaded attachments.

The device boasts a high torque of 95 Nm.

The device is connected to the network using a two-meter cord with a plug. The product is equipped with 2 open-end wrenches, an extension, and a nozzle.

Specifications:

number of speeds - 1;
power type - mains;
idle speed - 650 rpm;
power consumption - 1.2 kW;
functionality - speed regulator, start lock, additional handle;
device weight - 5.5 kg.

Advantages

low cost;
high power;
functionality at the level;
relatively light weight;
decent equipment.

Flaws

short network cable;
just one speed.

Exploitation

When using the tool, you must adhere to safety measures and comply with all the manufacturer’s requirements specified in the attached instructions.

Never overload the drill or allow its parts to overheat, even if there are built-in protection systems.
Use the tool only for its intended purpose.
Observe all restrictions set by its manufacturer, use the permitted speeds when drilling or mixing solutions.
Protect the instrument from moisture getting inside and mechanical external damage.

If you strictly follow these simple rules, the drill mixer will work properly for many years, helping you carry out cosmetic or major repairs in your apartment or country cottage. For professional builders, this is an indispensable assistant; with it, all interior finishing processes will be completed much earlier than the deadline established by the plan.

The best inexpensive models

The presented mixers are an ideal solution for small volumes of work, home craftsmen who have started renovation or construction of a country house.

Review of the best inexpensive hand-held construction mixers for mixing construction mixtures.

Fiolent MD1-11E 1100 W

The universal-purpose construction mixer Fiolent MD1-11E with a 1.1 kW electric motor is a practical tool for the production of mortars, paints, glue, dry concrete and other compositions.

The model can also be used as a drill for drilling holes in various materials.

The device is equipped with an M14 cartridge, an adapter for installing the cartridge, an ergonomic additional handle, and a soft start system.

Maximum efficiency of the mixing process is ensured by the speed controller.

The maximum torque value of the mixer approaches 85 Nm.

Specifications:

number of speeds - 1;
power type - mains;
idle speed - 600 rpm;
power consumption - 1.1 kW;
functionality - additional handle, speed regulator, start lock;
device weight - 4.7 kg.

Advantages

high power;
relatively light weight;
presence of an additional handle;
good torque.

Flaws

not rich equipment;
hard, short cord;
lack of reverse.

Instar EDM 25016 1600 W

The productive and affordable mixer Instar EDM 25016, equipped with a 1.6 kW engine, will provide high-quality mixing of dry and liquid components during construction or finishing work.

The device is characterized by excellent performance and high torque.

The unit easily copes with the densest mixtures.

The model has two operating speeds, an electronic speed control system, and receives energy from a network with a voltage of 220 volts and a frequency of 50 Hz.

The product is equipped with a 2-speed gearbox, a whisk, spare carbon brushes, and keys for changing equipment.

Specifications:

number of speeds - 2;
power type - mains;
idle speed - 650 rpm;
power consumption - 1.6 kW;
functionality - speed controller, start blocking;
device weight - 5 kg.

Advantages

high power;
ergonomic design;
presence of soft start;
high-quality whisk;
two-speed mode.

Flaws

stepwise speed control;
high noise level;
heavy weight.

Status MX1000 850 W

The construction mixer Status MX1000 with a power of 850 W will allow you to perform high-quality and fast mixing of liquid and semi-liquid compositions - paints, mortars, glue, plaster and similar materials.

The unit is equipped with an M14 cartridge, an electronic engine speed control system, and a single-speed gearbox.

The product is equipped with ergonomic handles and the ability to lock the start button during operation.

A service cover is provided for quick access to the motor carbon brushes.

The delivery set includes an additional handle.

Specifications:

number of speeds - 1;
power type - mains;
idle speed - 600 rpm;
power consumption - 0.85 kW;
functionality - additional handle, speed regulator, start lock;
device weight - 2.4 kg.

Advantages

compactness;
sufficient rotation speed;
small weight of the product;
functionality.

Flaws

the additional handle is not of the best quality;
low power;
one speed.

A few words about the recent past

Until recently, on domestic construction sites, they only knew different grades of concrete and two types of mortars: cement, for laying brick walls, and lime, for leveling and plastering these walls. They were prepared at RBU - mortar-concrete units, and delivered to the construction site by dump trucks. In the body of the dump truck, the compounds “stratified,” the heavy fraction sank to the bottom of the body, and a liquid mass called “cement laitance” formed on top.

At the site, materials were unloaded by dump truck into a bucket and transported to the work site. Before use, the delivered material was mixed with shovels in small containers. No one mixed the concrete mixture. It was loaded into prepared formwork and processed with an in-depth vibrator. The quality of the work was very relative.

Everything changed at the end of the last century. Mortars and concrete began to be delivered to sites in concrete trucks. The concrete or masonry mixture was mixed on the way to the object, the composition did not separate. The quality of concrete work has improved significantly.

In addition, ready-made dry construction mixtures have become available for sale. They were delivered to sites in bags of 25–50 kg. All that remained was to add the required amount of water and carefully move the contents.

This is where the problems started. To mix ready-made dry mixtures, you need a tool. It is difficult to mix the mixture in a bucket manually and obtain the composition of the required homogeneity. The owners of country houses and construction teams involved in European-quality renovations used electric drills and hammer drills for mixing, inserting first homemade and then factory-made devices into the chucks - whisks (or mixers).

To some extent, this was a way out of the situation. If you needed to mix paint or prepare wallpaper glue or mix a small amount of cement mortar, a drill and hammer drill could do it without any problems. But during large volumes of work, preparing viscous mixtures or concrete, drills and hammer drills were “killed” in batches: cartridges were broken, shafts and bearings were ruined, electric motors failed. This continued until hand-held construction mixers from Europe, Asia and the USA appeared on sale.

After some time, domestic manufacturers followed suit.

The best professional models

The presented devices are equipped with efficient motors, reliable gearboxes with high torque and ergonomic housings.

BISON MRD-1400 1400 W

The professional construction mixer BISON MRD-1400 with a power of 1400 W has the ability to install either one or two attachments, which ensure increased productivity of the tool and quality of work.

The device boasts decent torque (50 Nm), a powerful engine, and a metal housing of a single-speed gearbox for better cooling and greater durability.

The mixer is equipped with ergonomic handles with rubberized elements, a system for quick access to carbon brushes for quick replacement when they wear out.

The device is equipped with two nozzles and two keys.

Specifications:

number of speeds - 1;
power type - mains;
idle speed - 520 rpm;
power consumption - 1.4 kW;
functionality - speed controller, start blocking;
device weight - 7.1 kg.

Advantages

powerful and productive unit;
convenient speed adjustment;
two convenient whisks included;
easy change of motor brushes.

Flaws

heavy model;
one speed;
high price tag.

DEWALT DWD241, 1800 W

An efficient and high-quality DEWALT DWD241 device, equipped with an 1800 W electric motor, will allow you to quickly and effortlessly mix viscous mixtures in large volumes.

The product is equipped with a durable steel chuck, a speed control unit, and a three-speed gearbox with reverse.

The device has high torque.

The product is equipped with additional 2-position rear and 3-position side handles, and a soft start system.

The device is equipped with a 160 mm auger, two keys for changing equipment and routine maintenance.

Specifications:

number of speeds - 3;
power type - mains;
idle speed - 725 rpm;
power consumption - 1.8 kW;
functionality - speed controller, reverse, soft start;
device weight - 7 kg.

Advantages

three working speeds;
high power;
good torque;
build quality;
reliability of the design.

Flaws

high price;
heavy weight;
no case.

Einhell TE-MX 1600-2 CE 1600 W

The Einhell TE-MX 1600-2 CE 1.6 kW mixer is designed for professional use and can be used for preparing a variety of mortars and mixtures.

The model is equipped with a powerful electric motor and a two-speed gearbox that produces a maximum 750 rpm at idle.

The equipment is equipped with an M14 cartridge and a nozzle made of a durable metal alloy.

The device operates from a 220 volt network, the length of its power cord is 3 meters.

The efficiency of working with the device is increased by the speed controller and the lockable start button.

Specifications:

number of speeds - 2;
power type - mains;
idle speed - 750 rpm;
power consumption - 1.6 kW;
functionality - speed controller, start blocking;
device weight - 4.6 kg.

Advantages

product reliability;
high performance;
long power cord;
quality materials.

Flaws

decent noise level;
meager equipment.

DeWALT DCD240N

The DeWALT DCD240N cordless construction mixer with a productive and energy-efficient brushless motor will provide high-quality mixing of liquid solutions without connecting to an electrical outlet.

The product combines ergonomic design and high technical characteristics.

The mixer boasts good torque, the ability to work as a drill, and the presence of an electronic speed control system.

The metal gear housing guarantees increased strength and high-quality cooling of the power unit under increased loads.

The battery is not included in the kit and must be purchased separately.

Specifications:

number of speeds - 1;
power type - battery (54 V);
idle speed - 725 rpm;
functionality - speed controller, start blocking;
device weight - 5.1 kg.

Advantages

good performance;
quiet engine operation;
convenient speed controller;
possibility of autonomous operation.

Flaws

lack of reverse;
huge corolla;
No battery or charger included.

Drill attachments

Various attachments (many people call them whisks) for the drill mixer have standard sizes:

length - from 400 to 600 mm;
diameter - no more than 160 mm.

For different viscosities and characteristics of the mixture components, different shapes of mixers are used.

Right-handed spiral

Such nozzles made of high-quality steel or titanium have a diameter of 100-160 mm and are used for mixing heavy viscous mixtures:

cement mortar;
gypsum-cement plaster;
adhesive mixtures for tiles;
mixtures for seamless flooring;
sealant, facade putty;
epoxy resin with filler;
filling compound.

Thanks to the special design, mixing occurs in the direction from the bottom to the top - the solution is captured from the very bottom of the container and pushed to the surface.

Left-handed spiral

Its diameter has a smaller range - from 120 to 160 mm, it is used for mixing lighter and more elastic mixtures:

various paints;
varnishes;
wallpaper glue;
bitumen and light suspensions.

The process occurs from top to bottom, spiral nozzles push the components of the solution down, and then the mixture is squeezed up along the walls. All of this type of nozzle has a protective ring on the bottom to prevent damage to delicate elements on the bottom of the container where the process takes place.

Screw mixer

This attachment has two counter-rotating active screws and is only used for mixing light paints and varnishes. With strong rotation, the lower screw pushes the solution upward, and the upper one, on the contrary, which ensures fairly high-quality mixing without the formation of splashes.

Sometimes plastic blades are used, mounted on a steel base, so as not to damage the inner surface of the container.

Crosspieces

This type of mixer, which has four so-called arms made of round metal rods, is intended for mixing components, when mixing which the entry of air into the interior is unacceptable - various sealants, putties on plaster, adhesives, compounds. Thanks to the original design, mixing occurs in one plane and inside the composition, which eliminates air entrapment.

In addition to the main types of nozzles listed, there are narrowly targeted types that are used for thicker mixtures: gravel-sand based, polymer floors with fillers, mastics and clay-based solutions with high viscosity.

The pictures show the main types of mixing attachments for mixers and a construction drill-mixer.

Advantages and disadvantages

The main advantage of the drill mixer is the possibility of its multifunctional use. On the one hand, the tool is classified as a drill, therefore, in addition to mixing mortars, it can be used to form holes in various types of surfaces, even the hardest and densest. On the other hand, a drill of this type belongs to the low-speed category, so it cannot replace a drill 100%, but at the same time, it is the low speeds that make it possible to mix even the densest mixtures.

Obviously, such a design cannot be used in industrial quantities; its power and design features are not enough to cope with intensive operation. But it can handle small household tasks such as minor repairs and finishing of an apartment or private house in full.

Additional recommendations

Using a hammer drill you can mix a variety of substances:

plaster of all types;
cement;
putty;
tile adhesive.

When performing such work, it is unacceptable to use the impact mode. It is also unacceptable for the mixed liquid to come into contact with equipment. After finishing work, both the hammer drill itself and the mixer must be thoroughly washed and dried at room temperature. This helps extend the life of the device.

If the working part of the device becomes clogged with glue, it is necessary to stop it, disconnect it from the network and wash off the contamination. If you do not do this in a timely manner, you may be afraid of failure.

It is extremely important to ensure that the wires are positioned correctly. Winding them around the rim can result in serious injuries

The hammer drill must be held firmly in your hands and not be distracted by extraneous stimuli.

The number of revolutions is adjusted according to how deeply the whisk is immersed. If you mix at full speed at the very top of the bucket, splashes will inevitably occur. As soon as the kneading is completed, reduce the speed and remove the whisk. Immediately immerse it in a bucket of clean water and run it again for 2-3 seconds to completely clean it. This technique allows you to prepare the tool for work again.

To learn how to choose a mixer, watch the following video.