8 reasons why you should definitely buy a quaril bath

Cast iron bathtub, porcelain, acrylic or ceramic – for a long time, buyers were faced with exactly this choice.

One was distinguished by its unbearable weight, the other by its fragility, the third by its limited model range. Today on the market you can find a fundamentally new, innovative offer - a bathtub made of quaril . What kind of material is this, what advantages and disadvantages it has - everything is in this article.

Advantages and disadvantages

Like any material, quaril has its positive and negative sides.
Therefore, before choosing models made from this material, you need to weigh the pros and cons. And find out what operational features you will have to face. This is what we will do below.

pros

Strength. The material, thanks to quartz, has increased impact resistance.

Manufacturers claim that in domestic conditions the bathtub is almost impossible to damage, split, and even quite difficult to scratch.

Special surface. Quaril can look as smooth and shiny as traditional acrylic products, but it also has a pleasant roughness. Therefore, the surface of the bathtub is non-slippery, which prevents falls.

Maintainability. The leading manufacturer of quarryl bathtubs, Villeroy&Boch, gives customers a ten-year guarantee, thereby emphasizing its durability. However, if the bathtub splits for some reason, the quaril can be restored.

For the restoration of the font, there are specialized workshops and even pastes that can be used to restore light damage to the font at home.

Beautiful appearance. The bathtub can be painted in various rich colors and shades. The classic white model has a special brightness. The color does not fade or change over time, and UV rays are not dangerous either. Easy to clean with household detergents.

Plastic. The ability to create various models with both right angles and amazing bends, which do not require additional supports.

Those who value style and modern design will be pleasantly surprised by the ductility and durability of quaril.

The manufacturer can make a bathtub with a wall thickness of only 8 mm, give it the actual rectangular or angular shape, and do not use any frames for weighting.

Noise insulation. Quaril absorbs noise. Thus, an open tap will not create virtually any inconvenience: it will not disturb neighbors at night and will not interfere with listening to the radio.

Thermal conductivity. It retains heat perfectly and helps maintain the required water temperature for a long time.

Hygiene. During the manufacturing process of the material, the manufacturer can add various impurities and chemical compounds that will help the coating become antibacterial and dust-repellent.

Minuses

High cost of restoration. If a crack or chip appears, repairs will require large financial investments. Of course, it is better to have the defects eliminated by professionals, but this will increase costs even more.

In the Russian Federation, the material remains quite new, few craftsmen will undertake such repairs, so specialists set high prices due to the absence of any competition.

High cost of the bath itself. Quartz is a natural material. In addition, the creation of quaril takes place using a certain new technology, and is so far only possible in Europe. Due to the lack of competition and exclusivity of the material, the manufacturer sets a high price.

It is difficult to choose the same plumbing ensemble. There is still no large selection of sanitary ware made from Quaril on the Russian market. You will have to spend time searching for the right toilet or sink to pair with the bathtub.

Variety of models

Quaril products are classified according to three main characteristics: the method of installation, the characteristics of the enamel coating and the shape of the bowl. The choice of a specific model depends on the dimensional capabilities of the room and the personal preferences of the user.

Types of baths by placement method

All types of composite bathtubs, based on installation technology, are divided into two groups: built-in and free-standing.

Built-in models. The standard installation option is that the bowl is installed on a frame or on legs and covered with a decorative screen.

The bathtub is built into the podium or moved close to the wall. An alternative design is a corner model with two perpendicular sides

Features of built-in options:

• compact placement – ​​wall-mounted models occupy a minimum area, saving usable space in the bathroom;
• practicality – the space between the functional decorative screen and the bowl is used for storing shower accessories and household chemicals;
• the price of built-in modifications is lower than the cost of “stand-alone” models, but their installation is more labor-intensive and requires additional financial investments for the arrangement of the podium, frame or underground communications supply.

Bathroom free installation. Free-standing bowls look elegant and exclusive. However, it is appropriate to place such plumbing fixtures in a spacious room. Free-standing baths are an expensive option.

The bowls have decorative finishing on the outside and inside; some models are equipped with luxury fittings. The supply of sewer communications is carried out according to a special project

Technological solutions for bath surfaces

The leader in the production of quaril sanitary ware, Villeroy&Boch, has developed two coating processing technologies:

1. ActiveCare. Ceramic antibacterial enamel with positive silver ions. The synthetic surface prevents the growth of bacteria - reducing the need to disinfect the bathtub.
2. Ceramic Plus. Particularly smooth polished coating, which minimizes the deposition of dust and the accumulation of contaminants on the surface.

Micropores present in traditional plumbing products are smoothed out as much as possible - it is difficult for foreign particles to gain a foothold on the coating. Thanks to Ceramic Plus technology, cleaning your bathtub becomes much easier.

Bowl shapes and sizes

The choice of bath dimensions depends on the size of the room and the height of the household. The standard length of a sanitary tank is 170 cm, depth is 50 cm, which is comparable to the size of bathtubs made of cast iron and acrylic. If you need to replace old plumbing, then a similar quaril option can be selected.

A sit-down bathtub model is suitable for arranging a compact bathroom. In this case, you must follow the rule: the shorter the length of the bowl, the deeper it should be

The shape of a composite bathtub largely determines its location.

Quaril bowls are produced in the following configurations:

• rectangular;
• oval;
• round;
• triangular.

Rectangular bowls. Universal models – full-size and seated models are available. Installed in the corners of the bathroom or along the wall.

Quarryl rectangular bathtubs can be mounted in two ways: insertion into a prepared frame or niche, as well as separate placement

Oval. The smooth lines of the sanitary container add peace and harmony to the space of the room. Oval bowls allow you to implement various conceptual interior ideas.

The hemispherical type looks harmonious in luxurious oriental, traditional classic, sophisticated Japanese, natural Scandinavian or seasoned minimalist style.

Belonging to a particular design direction is dictated by the details: the shape of the stand, the presence of curly legs or the complete absence of any decorative elements

Features of oval composite bathtubs:

• overpriced compared to rectangular plumbing fixtures;
• models with an oblong configuration are quite spacious, but their installation will require more space than for mounting a container of the “correct” shape;
• the bowl looks better in a spacious room - where the beauty of the “oval” can be admired from different angles.

Round. Bathtubs require a lot of free space to accommodate them. The diameter can vary between 150-210 cm. On individual order, it is possible to produce a bowl designed for two.

Round bathtubs are considered the best option for installing and equipping with hydromassage equipment. Such plumbing fixtures are usually installed for relaxing procedures in SPA salons and private cottages.

Round models are very roomy. From the point of view of ease of use, this property is regarded as an advantage. However, filling the bowl requires a lot of water, which increases water bills

Triangular. This group usually includes corner bathtubs and models of regular triangular shape.

Quaril views adjacent to two adjacent walls have a number of advantages:

• space saving - taking a place in the corner frees up space for installing a spacious pencil case, washing machine or washbasin; a corner bowl of compact dimensions is an excellent option for combined bathrooms of small dimensions;
• the ability to combine a full bath with a shower;
• variety of design solutions - right- and left-handed models, symmetrical and asymmetrical bathtubs.

A corner bathtub is similar in capacity to a round shape, so they are also often used for arranging hydromassage equipment.

A freestanding triangular bathtub with smooth lines adds a soft feel to the interior and takes up less space than a round one. The non-standard configuration corresponds to the original floor mixer

Quarryl, acrylic or cast iron, which is better?

Quarril bathtubs are often compared with products made from other materials, so let’s look at the main points and decide which is better, Quarril or acrylic, or maybe the good old cast iron bathtubs?

Strength. Acrylic is an inexpensive material that is familiar to everyone; it is often subject to mechanical scratching of the top layer, and also crumbles and cracks under strong impacts. Quaryl, according to manufacturers, is four times stronger. But the leader here is cast iron; even with a strong desire, such a font is difficult to split.

Ergonomic surface. As noted above, the manufacturer of quaril, with the help of special impurities, achieves a special surface condition, which is called Soft touch. It is not slippery and pleasant to the touch, which models made of acrylic and cast iron cannot boast of.

Price. Here the leader with a minus sign is quaril. The price of bathtubs made of this material is several times higher than the price of models made of cast iron and acrylic:

• an ordinary acrylic bathtub costs about 10,000 rubles;
• cast iron - 14000;
• and quaryl as much as 50,000.

The noise insulation and thermal conductivity of the materials in question are at a decent level, but quaril still wins the debate.

Leading manufacturer Villeroy Boch

Villeroy Boch is a company established in Germany. It is familiar to many primarily because of the production of first-class tableware. They also produce sanitary ware from various high-quality materials, such as porcelain. It was they who came up with the idea of ​​creating bathtubs from quaril. Accordingly, they have the largest selection of such bathtubs.

The company introduces various nanotechnologies into production. For example, it achieves the formation of a surface on which dust cannot settle. The top layer of some models is enriched with microscopic silver ions, which prevents the formation of a bacterial environment. The photo shows the model that is most popular among consumers, villeroy boch oberon 170×70 . You can purchase it on our partners’ websites at the lowest price.

Repair

If, for some reason, a crack or scratch appears on the bathtub, or worse, the font breaks, it can be repaired sooner. Although it won't be cheap. There are already workshops in Russia that can work with this material. Professionals can glue parts of the product, repair large gaps, and eliminate serious chips.

Villery Boch provides a ten-year guarantee on its products and repairs its products themselves in case of damage. Interestingly, it was Villery Bosh that used to repair many porcelain and ceramic products with quarry.

It should be noted that paste for correcting defects in quaril products is also sold in construction stores. Repair kits cannot be used for acrylic bathtubs.

It will help, if necessary, to correct a small defect - a scratch or abrasion. Even independent use at home is allowed.

You should not try to fix a serious defect in a quaril bath yourself. Firstly, you can violate the terms of the warranty in this way, and secondly, if the repair is incorrect, the bathtub may leak at the site of the chip.

Characteristics

The height of the bath is 65-70 cm, so it is suitable for adults and children. At a depth of 50-60 cm, you will be able to comfortably keep your head above the water. The length can be between 150-180 cm. To make swimming comfortable, a special side is provided for the head.

Models with dimensions of 170 × 70 cm, 180 × 80, 170 × 75 are often produced. According to reviews, quaril baths have different modifications with different designs and parameters. These advantages justify the high price of the product. If customers wish, bathtubs can be equipped with support handles, legs, anti-slip coating, and a hydro or air massage system. The products are highly functional, so there is a constant demand for them.

What is Quaryl?

Quaryl is an innovative material developed and patented by the German company Villeroy & Boch. A fundamentally new production technology using quaril provides ample opportunities for the implementation of original design ideas that are not available with other materials. The composition of quaril includes: acrylic, quartz and patented additives. This is an environmentally friendly material that is completely safe for health. The Villeroy & Boch factory produces bathtubs and shower trays from quaril.

Squaro collection from Villeroy & Boch Advantages of squaril:

increased stability due to the thickness of the material;

increased strength due to the combination of the best properties of acrylic and the hardness of quartz;

light weight of products;

high degree of noise insulation and anti-slip;

surface shine and rich color;

aesthetically perfect appearance when facing with tiles due to the possibility of minimizing seams; thanks to the thick edge, a quaril bathtub can be mounted flush with the tiles;

smooth surface without pores, which makes cleaning the bathroom easier;

abrasion resistance;

Kvaril allows you to make bathtubs of various shapes (rectangular, asymmetrical, round and oval);

the ability to create right angles, which allows you to increase the internal space of the bath;

uniform color structure throughout the entire thickness of the material, which allows minor repairs to be made on site;

accurate and fast installation of products;

Almost all Kvaril baths can be equipped with a modern hydro and air massage system from Villeroy & Boch;

My Art Emotions collection from Villeroy & Boch

Oberon collection from Villeroy & Boch

Aveo collection from Villeroy & Boch

Squaro collection from Villeroy & Boch Quaryl bathtubs from Villeroy & Boch can also be found in the collections La Belle, Hommage, Ceta, Cetus, Luxxus, My Art, Nexion, Nexus, Pavia, quaryl shower trays - in the Futurion, Futurion Flat, Squaro collections . Squirel salons will help you learn more about the properties of the material and choose quaril products for your home. Salons of Italian tiles and sanitary ware "Squirel" Minsk, st. Timiryazeva, 72A tel: +375 (17) 399-99-03 Mon - Fri: from 10.00 to 20.00, Sat - Sun: from 10.00 to 18.00 Minsk, st. Uruchskaya, 19 building materials market, pavilion No. 6

Care

Quaryl material is resistant to household chemicals. But this does not mean that aggressive agents can be used for cleaning. Creamy cleaners cope with this task without harming the plumbing. For maintenance, you need to rinse the bathtub several times a week using non-abrasive cleaning agents. The resulting plaque and scale are eliminated by using table vinegar or special substances. The range of the latter is rich, and therefore everyone can easily choose the appropriate option.

Regular maintenance of the quarry bathtub is required. After each bath, rinse it with warm water and dry it with a soft material. These procedures significantly extend the life of the bathroom and protect against negative consequences.

Do not use hard brushes. They spoil the top layer of the material and are also useless. On a smooth cooker, dirt does not stick well, and therefore, to remove it, a soft rag or sponge will do.

What is quaril, its properties

Quaryl® is a modern composite material containing acrylic, quartz and environmentally friendly polymer additives. It was developed and patented by the European company Villeroy & Boch. Initially used for repairing and updating bathtubs made of other materials. But subsequently the full potential of the new raw materials was well developed and studied. Now quaril is used for the production of bathtubs and shower trays. Positioned as a unique material with excellent performance properties.

Quaril is a very durable and beautiful material

Quaril contains 60% quartz and special acrylic resins. The material is flexible and ductile in processing, but ultimately acquires high hardness and density. The creators are proud that they have successfully combined an innovative product with a variety of design solutions. Plastic material makes it possible to bring to life the most daring ideas. The wall thickness of the products can be 8-18 mm.

Manufacturers especially emphasize the absence of pores on a homogeneous surface, which makes maintenance easier. The technology for manufacturing products from quaril involves high-precision casting in special matrices. Accordingly, the finished baths have no seams and are of uniform thickness. In addition, they can be of various shapes, geometric or smooth.

Corner quarry bathtub

The patented additives included in the composition of quaril are designed to enhance some of the positive qualities of acrylic. They improve properties such as:

• rich, uniform color;
• shine;
• elasticity;
• smooth but non-slip surface;
• sound insulation.

The material has passed all the necessary tests for thermal insulation, slip resistance, strength and other parameters. The products fully meet all modern European safety and environmental requirements.

Important! Fully supporting the claims about the unique characteristics of the new material, the manufacturers of quaril bathtubs provide them with a long guarantee of 10 years.

Comparison

If a bathtub made of acrylic is of high quality, then it is reliable and durable. These baths are lightweight and easy to use. They keep the temperature heated by water for a long time. Bathtubs of various configurations can be cast from acrylic. If the item is of poor quality, then it may lose its shape from hot water, since the material from which it is made belongs to the class of plastics, and they are prone to deformation at high temperatures. Therefore, these baths are reinforced with resins and fiberglass. It turns out that the quality of such baths depends on both the quality of the raw materials and the number of reinforcing layers.

In addition, acrylic is painted in such a way that it cannot be rubbed off with anything. The reason may be rust in water, faded colorful clothes soaked in the bath, etc. Therefore, it is better to buy from painted acrylic. Then the change in the shade of the bath will not be noticeable. There is another drawback to these baths. Acrylic is susceptible to mechanical damage. Any scratches on its surface are noticeable and cannot be easily removed. A good quality acrylic bathtub is not cheap.

The workers at Villeroy & Boch decided to use the much-loved acrylic to create a new material – quarryl. The technology for its production is as follows: grains of quartz sand are placed in acrylic capsules, and the same polymer - acrylic - is introduced into the resulting voids between them. Despite the fact that the composition of the new material is simple, the product has better characteristics compared to the original source. The strength of quartz allows you to avoid additional reinforcement of the product made from it, the enamel of the bathtubs is not subject to damage, the bathtub is filled almost silently, and due to the presence of quartz in the material, anti-slip surface treatment with a special coating is not required. The only drawback is the high price. But it will also pay for itself over the long service life of the bath.

Bottom line: if you are at a crossroads when replacing a bathtub: acrylic or quarrylic, then as a budget and long-term option it makes sense to go with the first, and expensive, unbreakable, and therefore long-lasting products belong to the second category. Naturally, when choosing such an important subject, personal preferences must be taken into account. But it would be better to carefully consider their technical and operational characteristics in order to decide on the model based on a comparative analysis, and so as not to be disappointed in it in the future.

The main advantages of quaril baths

While working on the material, the creators sought to neutralize the shortcomings of acrylic, while preserving and enhancing its positive aspects as much as possible. Thus, quartz introduced into the composition of quaril provides it with strength and resistance to chips and scratches. This also makes it possible to produce heavier bathtubs with thick walls. If acrylic products necessarily required the installation of a power frame, then the new material no longer needs this condition. A wide range of freestanding bathtubs are manufactured from quaril.

Important. The thickness of the material at the base of the bathtub reaches 25 mm, which guarantees its good stability and sufficient strength.

Plastic raw materials make it possible to produce products of traditional or non-standard design shapes. The following bath options are currently offered:

• rectangular;

Rectangular quaril bath

• round;
• oval;
• corner;
• with beveled side;

Quarril bathtub with sloping sides

• hexagonal.

A quaril bathtub has low thermal conductivity, which means the water in it cools slowly. The surface is always warm and pleasant to the touch. The products are distinguished by their brightness and color saturation. Specially developed technology provides anti-slip performance. The manufacturer guarantees impact resistance, durability, and insensitivity to scratches.

The bathtub is easy to clean and does not require any special care. We recommend gentle soapy cleaning products that do not contain abrasive particles. The creators claim that the surface has absolutely no pores and is as hard as crystal. Microcracks do not form on it, which means that pollution will not penetrate inside. The material is designed to be hygienic and UV resistant.

Quaril bathtubs are very easy to clean

The weight of the standard model is significantly less than cast iron, but heavier than acrylic. Is about 50 kg. The polymer product has excellent sound insulation. The noise of falling water from a tap will not irritate you, and even more so, your neighbors will not hear it. The design of the quaril bath allows the mixer to be mounted on board.

Characteristics

The first and main difference between quaril baths is the properties of the material and the method of manufacturing this type of plumbing. Acrylic products are produced using the so-called hot stamping, and quarryl products are produced only by casting. This gives reason to consider them to be made of the same material as acrylic stone, but this is not the case. It is useful for anyone interested in new products in the field of construction and repair technologies and plumbing to study new information: quarry bathtubs - what they are and what are the features of their installation and operation.

Appearance of a quaril bath

Such products, like cast iron ones, are made by casting, and the result is a product that is radically different from acrylic bathtubs. The walls of quaril vessels for bath procedures are only about 10 millimeters thick. This makes the bathtub more rigid and durable and makes it possible to install such a frameless product on supports.

Mass production of such products is not yet well established. The production of quaril baths is by no means cheap. Basically, they are made to order at small factories. The process involves the initial creation of a mold, which is subsequently filled with material. Then the coating is processed. This is a rather long stage of the production cycle. The result is a beautiful model of plumbing fixtures with excellent quality indicators and excellent operating properties.

Original design of a quaril bath

Disadvantages of quaril baths

With all the very interesting and even unique characteristics, such household items cannot but have negative sides. Probably the most significant disadvantage of quaril baths is their high price. It significantly exceeds analogues made from traditional materials. Since these products are currently only produced in Europe, there is almost no competition. And the positive characteristics and high cost of the production process justify such a high market value.

The main disadvantage of quaril baths is their high cost.

Quarryl is much stronger than acrylic, but is inferior in this regard to cast iron or steel. However, it can only be damaged by hitting it very hard with a heavy object. In everyday life such a possibility is almost excluded. Like acrylic bathtubs, quaryl products do not respond well to very high temperatures. If you leave it filled with very hot water often and for a long time, the product can become deformed.

Important. A number of models of quaril bathtubs do not have holes for drainage and overflow. This is done to be able to place them in a convenient place. Often the kit includes a template and a cutter attachment for drilling yourself.

So far, only bathtubs and shower trays are produced from this modern material. It is impossible to choose a set for them in the form of a sink, toilet or bidet. You can stick to one style and color scheme, but you won’t find other plumbing products made from the same raw materials.

Bathtubs are divided according to the type of material from which they are made:

1. Cast iron bathtub 2. Steel bathtub 3. Acrylic bathtub 4. Ceramic bathtub 5. Artificial stone bathtub Currently, bathtub volumes can vary from 100 liters to 250 liters (but upon individual order, bathtubs with even larger volumes can be made) , it is chosen depending on the size of the bathroom. Cast iron and steel bathtubs are most widespread in the CIS countries, because... They are standardly installed during the construction of houses and apartments. Cast iron baths (unlike steel ones) have good heat capacity, because... the water in them cools much more slowly. But don’t forget steel bathtubs, because... They are much lighter than cast iron and easy to install, but their thermal conductivity is worse.

Quarryl bathtubs and shower trays

They have a characteristic shine that strikingly distinguishes this group of plumbing equipment from any other. They can be produced in both classic versions and equipped with nozzles and other elements for comfortable bathing procedures. High-precision casting makes any parts present in the design imperceptible. They blend with the material, which is reflected in the ease of use of Quaryl trays and bathtubs.

The baths deserve special attention. They can be round, oval, rectangular, angular, with beveled sides, hexagonal, or have smooth or slightly “wavy” edges. And if products made of acrylic require preliminary installation of a power frame, those made of quarry are installed directly on the base of the floor. The design features of the quaril bath allow the faucet to be installed from the side, which fully meets modern aesthetic ideas about the interior of the bathroom.

Owner reviews

Since quaril baths are not a cheap new product, there are not many reviews from owners yet. Most of them are positive; users note that during operation the original shine and gloss have not been lost at all. And cleaning is really not difficult.

Quaril bath with hydromassage

Owners praise the pleasant-to-touch surface that almost instantly heats up to water temperature. Thoughtful European design does not leave indifferent both people who have already purchased quaril bathtubs and those who intend to make such a purchase. What is attractive about the new product is that almost all models can be equipped with hydro and air massage systems.

Owners write that the products not only have an interesting appearance, but are very comfortable to wear. Manufacturers have done everything to make it possible to take water procedures with maximum comfort. The capacity of quaryl bathtubs is higher than their acrylic counterparts; this property encourages some potential buyers to purchase. The range also includes double baths.

It is better to entrust the installation of a quaril bath to professionals

But there are also negative reviews. Some of them are due to installation difficulties. Therefore, we can recommend entrusting this to professionals. Other negative comments about customer support not being good enough. Wanting to get advice from a manufacturer or an official dealer, people do not wait for an answer.

Quaril baths, being a new product, have already occupied a certain niche. The innovative material has a number of unique properties. The variety of ultra-modern solutions from European designers is impressive. Owners of quaril bathtubs receive high quality, comfort and aesthetic pleasure.

Conclusions and useful video on the topic

The video review shows several options for placing a quaril bowl and ways to harmoniously combine plumbing with the design of the bathroom:

The cost of innovative plumbing fixtures is high, and it is represented exclusively by European brands that guarantee the reliability and durability of their products. Quaril products have already occupied a certain niche in the group of goods, and will soon become more in demand due to a gradual reduction in price.

Please write comments in the block below. Share useful information on the topic of the article. Ask questions about unclear and controversial issues, post photographs.

What is quaril?

The basis for the manufacture of quarryl baths is a synthetic material created by combining acrylic with quartz sand. It has a dense structure in which the smallest particles of quartz are “soldered” into plastic shells, and the voids between them are filled with liquid acrylic.

The quarryl bathtub was able to adopt all the advantages of its acrylic predecessor, while at the same time getting rid of many of its disadvantages

From acrylic, the created composite polymer obtained excellent ductility and aesthetic appearance. The presence of quartz sand makes it strong and durable, and additive mixtures give the desired color and texture.

Quaril, first developed several years ago by the German company Villeroy&Bosch, was initially used only for the restoration and restoration of acrylic coatings of old bathtubs. Convinced that the new product can completely replace its acrylic counterpart, manufacturers focused all their efforts on the production of quaryl bathtubs.

The production of quaril baths is carried out by casting into special molds. They are coated with a shiny varnish, but at the same time have a non-slip surface, which is especially important for children and the elderly.

Thanks to the elasticity and pliability of the material, quaril baths can have a wide variety of geometric shapes, which is especially appreciated by lovers of comfort and adherents of individual design

The presence of reinforcing additives makes them heavier compared to acrylic models. The thickness of the walls and base of finished products can reach 10 cm. This makes them as durable as possible and allows for frameless installation.

Who invented this bathtub?

Modern Finns invented quaril, and in Finland itself the technology for producing bathtubs has been perfected, so for a European resident a quaril bath is not a novelty. By the way, quarryl was originally used as a restoration material, as an alternative to acrylic. And only then the wise Finns decided - why repair old acrylic, if you can immediately make a durable and at the same time beautiful bathtub.

Pros and cons of quaril baths

Quarril bathtubs, like sanitary equipment made from any other material, have their pros and cons.

Among the undeniable advantages of quaril baths are:

• Exquisite appearance. Smooth, homogeneous and devoid of any roughness, the surface shines with impeccable whiteness.
• Light weight. They are heavier than acrylic, but much lighter than their steel and especially cast iron counterparts.
• Structural rigidity. Durable quaril baths with rigid walls do not require the installation of an additional reinforcing frame.
• Impact resistance. They are not afraid of shocks and mechanical damage. An object accidentally falling into the bowl will not damage the integrity of the surface.
• Provides a sound-absorbing effect. The presence of acrylic in the polymer structure allows you to absorb the sound of pouring water, making it softer and muffled.
• Low thermal conductivity. The water in such a bath slowly cools, maintaining a comfortable temperature for the body. The bath itself, unlike its predecessors, remains warm to the touch.
• Long service life. The high strength of the quarry, from which the thick walls of the bath are cast, increases the service life of the product.

Rectangular models are ideal for small bathrooms. They are easy to fit into the space allocated for the bath, saving some space.

The use of modern technologies in the manufacture of quaril sanitary ware allows you to create comfortable bathtubs with both oval edges and rectangular shapes

Quaril baths are famous for their ease of installation. The installation can be done without the involvement of specialists yourself, thereby reducing the cost item.

The surface of quaril baths is resistant to detergents. But when processing it, it is unacceptable to use compositions containing abrasive elements. If scratches or damage to the surface occur, it can always be restored using special means.

Bathtub bowls made of quaril, with the same volume, are often more spacious than the same models, but made of acrylic

The main disadvantage of quaril baths is the high cost of the products. They will cost less than the same models made of natural stone. But in the price gradation, among the acrylic, steel and cast iron bathtubs on the market, quaril models occupy the highest positions.

This is due to the fact that the production technology is still new and competition in the market is not so great. Some consumers who have installed quaril sanitary ware in their home note that with prolonged exposure to high temperatures, the walls of the bathtub may become slightly deformed.

Among the significant disadvantages of quaril plumbing is its uniqueness. Only bathtubs and shower cabin elements are made from this polymer. Finding sinks and toilets that match their style is not an easy task.

Material

Such baths are made from a special composition called polymethyl methacrylate. It is a mixture of acrylic with tiny round particles of quartz, the spaces between which are filled with acrylic. In addition, each such grain is placed in an acrylic shell. It is the quartz component that ensures the high strength and reliability of the bath. It does not require the manufacture of a special reinforced frame.

Quaril lends itself well to processing. When casting bathtubs with this material, you can achieve straight, expressive lines with the absence of rounded elements. It is quaril that is ideal for the production of laconic products in a strictly consistent style. Clear, straight contours contribute to a minimum number of seams when tiling the bathroom. In addition, the tiles look better.

Quarry bath in the interior of the bathroom

In addition, it is easier to find a place in the interior of a bathroom for a straight bathtub; it is more capacious, but can effectively save space. Kvaril looks attractive in appearance, warms up well and does not cool down so quickly. The surface of such products does not cause much noise when a stream of water from a tap is directed at it. Quaryl has high strength, so the sides of such a bathtub are made thinner than in acrylic models.

Options for popular models

The bathtub is the most massive element of the interior of the room for receiving water procedures, and therefore attracts attention first of all. Quarryl bathtubs, characterized by excellent aesthetic qualities, will be a worthy addition to an interior decorated in any style.

The best option is a bathroom, the parameters of the bowl of which provide convenience and comfort for all family members, and the dimensions of the structure occupy only a third of the room’s area

The shape of the bowl depends only on the size of the free space and your design ideas. A wide range of quaril baths provides a lot of scope for creativity.

On the market it is not difficult to find bowls with a variety of shapes and sizes, from compact “one and a half” bowls to spacious “two-meter bowls”, the width of which is one meter or more.

Type #1 – free-standing

Free-standing bathtubs made of quaril are chosen by owners of large and spacious apartments, installing them in the center of the room.

For a room decorated in a classic style, a free-standing bathtub with a traditional rectangular shape is perfect.

A white freestanding rectangular bathtub does not need an additional “frame”, since its outer walls are already aesthetically designed. This model can be:

• place in the corner of the room;
• move it to the wall;
• install in the center of the room, arranging an impromptu podium for supplying communications.

Bowls of round shapes, resembling miniature baths and decorative ponds, are perfect for bathrooms decorated in thematic styles: marine, Chinese, ethnic...

Ergonomic models with rounded shapes and non-traditional contrasting shades are perfect for bathrooms in a modern style.

Type #2 – rectangular

In apartment buildings, where bathrooms are not famous for their large area, built-in rectangular models measuring from 1.5 to 1.7 meters are most widespread.

Traditional models are designed for an average person. It is convenient to stretch out to your full height during water procedures, relaxing in warm water after a hard day at work.

Due to the high hardness of the polymer, quaryl bathtub models allow the use of clear lines in the design, devoid of roundness, which are characteristic of conventional bent plastic.

There are models on sale equipped with hydromassage systems, including those equipped with hidden nozzles.

View #3 – corner

If models of standard dimensions for some reason do not fit into the parameters of a small room, corner baths come to the rescue.

A corner quarry bathtub, which looks like a miniature swimming pool, looks equally good both near the wall and in the middle of the room

The shape of the bowl of such a bath can be:

• an isosceles triangle with a rounded side;
• trapezoid with beveled corners;
• asymmetric polyhedron.

Due to the non-standard shape of the product, they have a larger bowl volume than rectangular models.

The most popular are corner models with a length of 1.5-1.6 meters. They can be made in both left- and right-handed versions.

The design of a room with a corner bathtub looks especially presentable if the bowl has lighting, a hydromassage installation and other convenient devices

The main advantage of corner models is ease of use. In the diagonally placed bowl, you can take any position, feeling comfortable and not cramped.

Type #4 – sitz baths

Manufacturers also offer a category of shortened seated models, the dimensions of which do not exceed 1.2-1.4 m. Their main feature is their small format and the presence of a backrest.

Water procedures in such bowls are taken in a sitting or reclining position, which is very convenient when bathing small children and people with disabilities

Sitz baths typically have a rectangular bowl with a seat. Although there are also corner options. Modern designs often include sealed doors.

More options for quaril bathtub models:

Designer highlight of the bathroom

Due to the fact that quaril is a durable material, it is also distinguished by its good “pliability” - the material can be processed without special rounding of the lines, as is done for acrylic bathtubs that are familiar to us. Kvaril allows you to create clear and straight lines - such a bathroom will be a godsend for those who prefer a strict, classic and laconic style. Plus, straight, clean lines in the bathroom will keep the number of seams to a minimum and make the tiles look neater. Thanks to its shape, the bathroom will fit into a small space and save a couple of square meters. Another external advantage of such a bathroom is that its walls are only 1 centimeter thick, which means that it does not require frame installation.

Installation and connection nuances

Most models of quarry bathtubs do not initially have a hole for an overflow, and some of them do not even have a drain. This is done by manufacturers so that the master has the opportunity to choose the most convenient option for connecting to the sewer system.

The hole for draining in the quarry is drilled using a crown of the required size with diamond coating applied to it

In the same way, faucets, handrails and other necessary equipment are installed in the quarry plumbing fixtures. It is better to entrust this painstaking and responsible work to a professional.

Built-in models are equipped with special support legs, by twisting which it is convenient to adjust the height of the structure.

As noted above, quaril baths do not require additional support during installation. The constructed frame in this case performs only decorative functions.

The space under the bathroom is often decorated with a sliding screen, behind the walls of which household chemicals or useful little things for the household are placed.

The installation technology is not much different from the installation of steel or acrylic models:

• The bath is placed on a previously cleaned base.
• Using an adjustable base, guided by a level, level the upper plane in a horizontal position.
• Faucets with cold and hot water are installed in one of the sides.
• Using the plastic adapters included in the kit, install a drain-overflow device and connect the bath to the sewer pipe.
• Check the tightness of the connections. To do this, fill the container with water and leave it for several hours. If necessary, repair leaks.
• The front side of the bathtub is covered with a panel of a decorative podium or decorated with facing material.

The precise geometric shapes of the quaril models make it possible to achieve a minimal seam between the edge of the structure and the tile during the cladding process.

The process of installing and connecting a quaril bath is clearly presented in the video:

How to install?

The installation of a quaril bathtub itself does not require any specific skills and is quite simple, as mentioned above - bathtubs made of this material do not require a frame, but one problem may arise. Manufacturers often do not make drain and overflow holes so that the user can choose where it is best for them to be when installing the bathtub.

Brief installation instructions:

• the font must be installed on a well-cleaned, level base;
• then, using an adjustable base and a building level, you need to align the edges of the bathtub to a strict horizon;
• drill holes for drainage and overflow and install a special siphon and connect to the sewer;
• if you plan to install the faucet on the bathtub, embed it into the side;
• fill the font with water and check the tightness

The video below shows the complete installation process.

Cast iron bathtubs are a timeless classic of the genre

Cast iron is the next most popular material after acrylic. The reliability and harmlessness of this material is probably known to everyone. Indeed, from a professional point of view, cast iron is the safest material, it does not emit any toxins, and all possible bacteria died when enamel was applied at 900 degrees Celsius. In turn, the large weight of the material makes the bath resistant to tipping.

At the same time, weight may also seem like a definite disadvantage - the buyer is often frightened by the difficulties when delivering and installing a cast-iron bathtub. In our opinion, this minus is very conditional, since you encounter delivery once in 20 years, and even today all stores have a delivery service that will take care of all the worries.

Also, the disadvantages include the limited design - if you choose an angular or asymmetrical shape, then you don’t have to look for cast iron bathtubs, they don’t exist. But the hydromassage is installed on cast iron without any problems - you can easily buy a cast iron hydromassage bath in our showroom.