If you want to choose a floor covering, you can pay attention to the Artens brand. The laminate of this manufacturer is manufactured by several popular European companies, including: Kronostar, Lassen, Egger, and Spanolux SA.
If you want to purchase durable material that will last up to 30 years, you should choose decor that is produced under the Artens brand in Germany. Reviews about this product are mostly positive, consumers especially note the affordable price, good quality and excellent appearance. However, you should personally inspect the integrity of each panel before purchasing, as some may be defective.
Characteristics of the “Byzantine Oak” option
The Artens company (we will describe the laminate of its production in the article) offers its consumers many options for the named floor covering. One of the varieties is “Byzantine Oak”, the thickness of which is 10 mm.
This material is of high quality and is made on the basis of high-density fiberboard. Thanks to this, the manufacturer was able to obtain products that correspond to wear resistance class 33.
This flooring is intended for installation in commercial and residential premises; the surface can be subject to any degree of load. The canvases perfectly imitate the natural texture of parquet, and laminate flooring is easier to care for than some alternative options.
Production Features
Artens laminate, which is produced in a factory using high-tech equipment, is made from fiberboard. It provides products with special strength and rigidity.
A paper layer equipped with a printed pattern is laid on top of it - it is this layer that imitates parquet made from natural wood. Next comes a special protective layer, and melamine or acrylate resin is applied to the paper.
By the way, if you want to choose products that are hard, you should prefer a laminate that uses corundum as the surface layer.
Aberhof company
This company was created on the basis of two countries - Germany and Switzerland.
Where is German laminate exported to? Minsk, Moscow, Kaliningrad, St. Petersburg - this is not the entire list of cities where you can purchase this coverage. The company has become popular thanks to its high-quality products, which are distinguished by their pleasant appearance and long-lasting performance properties. There are many laminate designs, each with a distinctive pattern. Its price is quite reasonable, so anyone can purchase it. The most popular model is Victory. It was thanks to her that the company became famous throughout the world.
Dimensions of Artens brand laminate
Artens laminate, the sizes of which can be very different, has a thickness ranging from 7 to 12 millimeters. On sale you can find panels with dimensions of 1292x192, 1285x194, and 1285x191 mm.
When choosing a suitable floor covering for yourself, remember that on thicker laminate boards, furniture legs do not leave marks; in addition, such a floor is usually warmer, and its elements are easier to install.
Pricing policy and purchasing methods
- The cheapest among the listed brands are coatings (from 280 rubles per sq. m).
- In second place in terms of affordability is laminate brand “Platinum” (from 330 rubles per sq. m.).
- Laminate "Sinteros" costs from 450 rubles. per meter Tarkett brand coating is in the same price range.
- The cost of Quick Step panels is from 600 rubles per sq. m. m.
- Ritter laminate is a little more expensive - from 700 rubles per sq.m.
- For comparison: Swiss laminate “Pergo” costs about 1000 rubles per sq. m. m.
You can purchase domestic brands of laminated coatings in construction stores. The second way is to order online on the websites of companies and stores.
Positive reviews
If you are considering Artens laminate as a flooring option, you should first read the positive and negative reviews about it. Perhaps the opinions of users will allow you to understand whether it is worth purchasing this finish for your home.
So, according to some home craftsmen, the operation of the described laminate is quite pleasant. Self-installation will take quite a bit of time. If you do not have the appropriate skills, you will have to spend several days on this.
The named floor has been tested for strength by many owners of houses and apartments for many years, thanks to which they are convinced that the initially shiny and bright surface does not lose its original attractiveness during operation.
Artens laminate, reviews of which can be very different, still has additional advantages in the form of affordable cost, as well as smooth and clear lines of each product. After installation, it retains its noble appearance for a long time.
This means that if you want to find quality and beauty in one coating, then you should choose Artens laminate. This is exactly what many users who have already managed to change the flooring in their homes think. It is noteworthy that the manufacturer offers products for sale in two classes of wear resistance, thereby allowing you to save money if the floor in the room is not subject to intense loads.
Varieties
Why Germany? The most popular is German laminate of 32 and 33 classes.
It is installed not only in residential premises, but also in offices. Such laminate can be purchased on the domestic market at a high cost. Its price is due to the fact that Germany does not know how to produce low-quality goods. Therefore, it is necessary to choose German companies, each of which is responsible for the quality of the product and its performance properties. The installed floor will last a long time.
German laminate class 32 has one feature. In terms of its qualities and performance characteristics, it is most similar to parquet boards. Many manufacturers occupy a confident place in the domestic and world markets. Every year the range becomes more and more, so German laminate is in great demand. Today it is easy to choose this coating to complete the interior of a room or office. To choose the appropriate option, it is necessary to evaluate not the cost, but the quality of the material. Let's look at the most popular manufacturers.
Negative reviews
But Artens laminate, reviews of which you should definitely read before going to the store, may also have some disadvantages. A number of buyers note that when purchasing the material, the finishing colors in some packs are different, which is why it is recommended to check the color match in the store.
Sometimes it happens that there is no pattern at the edges of the boards; this can be considered a defect, which allows you to return the cladding to the store. According to buyers of Artens flooring, the laminate of this company often suffers from defective products, which, by the way, are not always noticeable at the time of purchase. If you bought the material with a reserve, this may solve the problem, but it also happens that the finishing is purchased in another city or purchased to order. In this case, it is not possible to change products.
Carrying out installation
Now let’s clarify what is required to carry out the installation of laminate flooring. The list will include:
- primer;
- foamed polyethylene;
- wedges for arranging technological gaps;
- baseboard fastenings;
- the baseboard itself.
You should prepare plastic film and glue. On sale you can find wedges that are intended for laying laminate flooring; this solution can be called affordable and cheap, like the crosses used when laying ceramic tiles. As an alternative solution, you can use pieces of drywall, laminate scraps or wooden pegs, but in any case their dimensions should be the same and the width should not exceed 10-15 millimeters.
Artens laminate, a photo of which is presented in the article, is not installed using glue; this composition is useful only for fastening elements in those places where the lamellas will be trimmed and the locking joints will be removed.
It is important to ensure that you have the appropriate tools, namely:
- construction knife;
- electric jigsaw or hacksaw;
- hammer;
- construction corner;
- roulette;
- pencil;
- wooden block (it will be needed for tamping the slats).
Egger company
Class 33 laminate from this company is presented in the Country Style Brilliant collection.
It has a long service life due to the wax coating, which prevents moisture from entering. The panels are 12 mm thick and are connected to each other using a double locking system. Egger supplies laminate flooring for offices and various areas in shopping centers.
Work process
The base will need to be cleaned of dust and debris. If possible, it is best to use a construction vacuum cleaner.
The surface is primed, which applies not only to concrete screeds, but also to wooden floors. The latter option is additionally treated with fire retardants and antiseptics.
Waterproofing is laid on the cleaned surface, the material should be placed with an overlap of 20 centimeters. The resulting joints must be taped.
At the next stage, foamed polyethylene is laid, and installation of the laminate begins from a source of natural light, that is, from a window opening. The underlay for the laminate can only be placed on the area of the floor where the flooring is being carried out, and then the material is laid as the work progresses. This will allow you to maintain the cleanliness and integrity of its surface when installing it yourself.
Expert advice
Laying Artens laminate involves the use of a backing that should extend 3 centimeters onto the walls, which will allow the formation of a shock-absorbing strip. Subsequent strips of polyethylene are laid end to end with the previous ones, and then glued with tape.
Installation begins with the installation of the first lamella, which will be located in the corner of the room on the window side. Pegs should be installed between this element and the wall, which also applies to the end part. Next, the lamellas are installed in a row as one-piece elements, and it is important to make the correct connection.
There are grooves at the ends into which each subsequent panel is inserted at a slight angle (no noticeable effort is required), then you should use a special hammer. If the row does not contain a whole piece at the end of the installation, then it is necessary to fill it with a segment.
The second row begins with a piece that remains from the previous row, but only if its size is less than 30 centimeters. Otherwise, you need to cut half of the new panel. The elements of the second row should be laid initially without using a lock with the first row; you just need to touch the edge of the end. As soon as the second row is ready, you need to lift it, and then push it all the way into the lock and latch it.
