How to organize vertical flower beds and flower beds at home: DIY

Having free space on the site is an excellent opportunity to diversify the landscape by adding an unusual flower bed made of crushed stone or gravel. Such a flower garden will not cause problems during the maintenance process and will become an effective element of decor; it can be decorated exactly the way you want, thanks to the convenience of the source material. A do-it-yourself crushed stone flowerbed is an excellent option even for inexperienced gardeners. Everyone can create a real work of landscape art by showing their imagination.

Advantages and disadvantages

Advantages of vertical flower designs:

Easy to care for plants . Absence of weeds and small pests, so there is no need for digging;
Take up little space . This is especially true for growing in a small area of land, a garden, or even in an apartment building;
Ease of construction of structures . Freedom of creativity and imagination - when you can build foundations for flower beds with your own hands;
Versatility and mobility of flower beds . Want to move it to another corner of the garden? Almost all vertical flower beds are lightweight, they can be supplemented, modules can be moved;
External attractiveness . Vertically planted flowers highlight a summer cottage and become its unique decor.

An excellent combination of palette in choosing planting annuals.

There are also disadvantages, these include:

Unsuitable for winter . If perennial plants are grown, then the soil freezes in the cold season, the beds will have to be covered in a greenhouse or in a heated room;
Small volume of soil . For a vertical flower garden and a garden flower bed, flowerpots of a certain size are required. Limiting containers is not suitable for all types of green crops, but those already planted will require additional feeding;
Lack of moisture . A cascading flower bed needs frequent watering, because the soil in vertical containers dries out much faster than in a vegetable garden.

Flower pots attached to the fence wall decorate the garden.

To correct deficiencies, they will help you:

Hydrogel . An artificial material based on polyacrylamide that accumulates moisture in the soil. As a result, ideal living conditions for plants are created;
Automated drip irrigation system . You can buy it at a specialty store or make it yourself. In this case, you will need a pipe whose diameter will not exceed 3 cm; small holes are drilled in it, using a third of the entire pipe. The diameter of the holes is approximately 5 mm.

Variety of flowers in flowerpots in the courtyard

Arabesque

This type of stone flower beds is used quite rarely. This is due to the fact that the design of this flower bed is quite formal and suitable for decorating any government buildings.

The arabesque itself looks like a large canvas on which flowers are located. In addition, you can use your imagination and plant flowers so that they are arranged in a pattern.

Let us remind you that this method is one of the most expensive, since the canvas itself is quite large and you will have to plant a lot of flowers.

Evergreens - a complete list with descriptions and recommendations from a gardener
Vertical gardening - from idea to implementation, choosing options according to budget and attractiveness (photo + video)
Vertical flower beds - basic principles and rules for choosing plants and arranging a suburban area with your own hands

In addition to the fact that planting flowers will take a lot of money, they are also very difficult to care for. They only need to be watered using a special hose with a special spray nozzle.

Considering that this method has quite a lot of inconveniences, it also has a plus. The main advantage of this method is that it looks incredibly beautiful and large-scale.

To summarize, this method of laying flower beds is only suitable if you have a fairly large dacha and have a lot of time and money.

But, if you have a rather small dacha area, then it is better to pay attention to other types of stone flower beds.

Types of vertical flower beds

Today, manufacturers offer us ready-made solutions: flower beds made from different materials for planting vertical plants. They consist of about 10 tiers, there is even a watering system installed for safe and easy care of the plantings. The cost is not budgetary, so you can make the structures yourself. Let's consider all the options for flower beds for vertical gardening.

flower tower

The tower is a wooden or iron beam with hooks on which flower pots and vases with flowers are hung.

An imitation of the original flower tower will decorate the garden.

Flower ball

The base of the ball is made of wire, connecting circles. At the same time, they leave free space for plants. The distance for seedlings should be at least 6 cm from each other. A polyethylene bag is placed in the ball, filled with soil, holes are made and seedlings are planted. It is advisable not to hang the ball directly under the sun.

You can also make a hanging ball for growing flowers yourself.

Screen

The screen looks like a bright cascading stand, supported by a support. Pots with plants are hung on hooks or placed on already attached shelves.

The combination of wood and a row of flowers on the facade complements the space outside.

Blooming pillar

A cylindrical container is filled with soil. Holes are made at different distances from each other and green crops are planted.

Bright flowers against the background of beige walls decorate the entrance of the house.

Tunnel

The flower corridor is formed from a series of colorful arches.

A tunnel of bright, precisely planted plants creates a fabulous impression.

How to create a vertical flower bed with your own hands is shown in the video below

Hanging flowerpots

The easiest way to decorate your garden plot. Flowerpots are mounted on walls, fences and hedges, on any vertical, stable base. The main advantage is that there is no need to follow strict rules of landscape design. Any height and all colors can be combined with each other!

The geometric shapes of flower beds look catchy.

To learn how to properly create a flowerbed design without outside help, read the article: Design of a flowerbed with stones.

Tools

To make a vertical flower bed, you need to prepare the following materials and tools:

plastic container of suitable volume;
polyethylene pipes;
rigid metal mesh (chain-link);
pallets/wooden boxes;
pots/vases;
lumber/logs;
car tires;
material for drainage (expanded clay, small pebbles);
dark garden film;
knife/scissors;
wire/clamps;
fertile soil;
flower crops.

How to make a vertical flowerbed using improvised materials

You can come up with an original cascading vertical flowerbed yourself. Absolutely all available materials lying around in the utility room are suitable for production: buckets, plastic bottles, baskets, barrels, boards.

From plastic bottles

Don’t rush to throw away used bottles. They will perfectly replace pots and flowerpots in the process of vertical garden design. As a result: you get a blooming screen. It can be made from a wooden flat board, up to 2 m high. Homemade flowerpots made from bottles are attached to the surface.

Preparation method:

cut the bottle into equal parts, we get 2 pots;
or cut off the bottom or neck, we get 1 large container;
make a hole in the side;
We attach the vases to a wooden background at a distance from each other;
We fill the bottles with soil and plant vegetation in them.

After some time, the entire shield will literally bloom and look bright. This method is also suitable for decorating the walls of a house, barn, or gazebo. If we are dealing with a brick wall, then in order to avoid the spread of dampness, the vases are attached to hooks.

An unusual wall of reinforced bottles on a fence with flowers cannot get boring.

From the boxes

Boxes made of plastic or wood are another replacement for full-fledged pots.

Preparation method:

fill 5 boxes with soil and install them;
It’s best not to stack them on top of each other, but scatter them, leaving gaps;
into the gaps and plant green crops.

As the flowers grow, they will hide the boxes with their array of greenery.

Wooden boxes with flowers create a feeling of unity with the garden and nature.

Made from metal mesh, chain-link mesh and garden film

A labor-intensive but practical way of landscaping a site.

Preparation method:

we purchase a piece of mesh where the length and width are approximately 1 m;
We lay a net, and on top - a dense dark-colored garden film. We connect the mesh and film with staples along the edges;
We roll the mesh with the film into a tube so that the side with the film is inside the cylinder. We make holes in the film;
secure it in a container (pot, bucket, vase). For a chain-link mesh, you will need a container of wide diameter, since the mesh is more voluminous;
pour expanded clay onto the bottom in a layer of up to 10 cm;
take a corrugated tube about 15 cm in diameter, make small holes along the entire length, seal one side with tape, insert the taped side into the cylinder;
fill the free space between the tube and the mesh with soil;
fill the tube with water;
We plant the plants in the prepared holes; you can also plant flowers on the upper plane for decoration.

A flower bed made of dark-colored film provides the necessary, comfortable environment for flowers.

Important! A homemade drip irrigation system provides the necessary nutrition to plant roots. To prevent the water from evaporating too quickly, place a small piece of slate on the very edge.

From geotextile

Flowerbeds are also created using durable, moisture-permeable fabric.

Preparation method:

we take several pieces of reinforcement up to 2 m long, strengthen them into the ground so that we get a circle;
we wrap the segments with geotextile several times, forming a cylindrical vase along the way;
we make mini-cuts on the canvas for future flowers;
install a corrugated pipe for the irrigation system as described above;
fill the space left free between the material and the tube with soil;
Place the seedlings in the soil next to the holes.

A budget-friendly and durable option for arranging flower beds in a summer cottage.

Important! Choose geotextiles and film in a dark color. Experts recommend this so that light does not leak into the nutrient medium and flowering and wilting of the root system do not begin.

From a pallet

A whole wooden pallet is sanded to a smooth state, treated with a special anti-rotting agent, and varnish or paint is applied.

Preparation method:

We fold the geotextile in several layers and attach it using a furniture stapler to the inside of the pallet. The tray must be closed on all sides except the front part;
Place the pallet on the surface with the inside facing up and pour soil into the holes between the boards. Shaking the container periodically and adding soil;
here, in the holes, we plant the prepared flowers and water the seedlings;
we leave the flowerbed in this position for several days, then we lift it vertically and install it where we planned, for example, near a fence or the wall of a house.

Flower beds planted in the holes of the pallet take up little space on the ground.

Using other items

If you have old, ownerless items, do not rush to say goodbye to them. Watering cans, buckets, pipes, wheels, tires, boxes - anything will do.

Watering cans, buckets, basins

Preparation method:

we dig a pipe into the ground and attach containers for plants in it;
We fill them with soil and plant flowers. Don't forget to water.

A practical way to reuse household items is to create beds and flower beds in them.

Tires and Tires

Preparation method:

we install old tires, simulating a pyramid;
fill the soil and plant plants around the perimeter.

Painted in bright colors, the tires transform any area.

Plastic pipe

A flower garden from a profile pipe is prepared with your own hands in the following way:

we make holes in the pipe about 6 cm in diameter at different heights;
fix the pipe into the ground and fill it with soil;
Let's plant flowers in the holes.

A vertical flower bed made of PVC pipe is a convenient and practical way of landscaping an area.

Important! To organize drip irrigation, use a tube as described above.

Pots and containers

Preparation method:

install containers on a wall or fence;
fill it with soil and plant flowers.

The option of placing flowers in pots for a vertical garden is ideal in a small space.

Barrels and containers

Preparation method:

cut off the bottom on one side and make holes in the sides of the barrel, at a distance of at least 20 cm from each other;
install the irrigation pipe in the manner described above;
fill the voids with soil and plant flowers in the holes and on top of the barrel.

A flowerbed in a durable wooden barrel does not take up much space in the garden.

How to create a mini-greenhouse at home , read the article: Flower arrangement in the interior.

Blooming pillar at home

You can make a beautiful flower bed like a flowering column with your own hands, using plastic mesh and geotextiles (can be replaced with film). Step-by-step production of designs for flowers:

4-5 pegs are driven into the ground at the selected site to a sufficient depth (to securely fix the structure).
A film is wrapped around the resulting frame, and the structure is reinforced with mesh from the outside.
Soil is poured inside the resulting tower, alternating soil with expanded clay (drainage layer).
Several holes are made along the surface of the film with a knife.

Flowers are planted in the holes, usually annual crops (petunias are perfect for a vertical flower bed).

How to choose suitable flowers for vertical flower beds

For vertical flower beds, garden and landscape designers recommend choosing bright, unpretentious annual plants. Annual flowers will not delight you for so long, but they compensate for the short flowering period with a limitless palette of shades.

A harmonious combination of different varieties of flowers complements the balcony.

The most suitable types:

Petunia . The most popular plant. A long-flowering species, it pleases before the onset of cold weather, but loves the sun and warmth;

The most suitable species: petunia. The most popular plant. A long-flowering species, it pleases before the onset of cold weather, but loves the sun and warmth;

Nemesia. Multicolored nemesia will bloom a month after planting;

Lush-flowering nemesia is an excellent option for diversifying flower beds.

Lobelia . This flower has a variety of shades of blue: from pale blue to deep purple;

Gracefully blooming lobelia abundantly covers the flowerbed.

Godetia . Resistant to adverse weather conditions, godetia blooms from mid-summer until the first frost;

Matching shades of godetia flowers for a vertical flower bed

Sweet pea . Large flowers, up to 5 cm, form a bright head in a flowerpot. Loves abundant watering, sunlight and is resistant to bad weather;

Sweet peas will fit perfectly into your garden

Mirabilis . A nocturnal flower that blooms its buds exclusively in the evening, and during the day it rests, hiding them. Resistant to heat and drought;

Sunny mirabilis will decorate any garden bed

Nasturtium . Curly stems with bright buds love sun and moisture at the same time.

Bright nasturtiums beautifully woven into the fence

Search, preparation of stones

Different stones are suitable for making a flower bed. The easiest way is to walk along rivers and other natural areas. There will definitely be examples that will satisfy your needs.

Suitable material can be specially purchased or made with your own hands from cement or construction waste. Natural stones must be washed and dried. It may be necessary to level the base, perform grinding, and other interventions.